欢迎访问中科光析科学技术研究所官网!

您的位置:首页 > 其他

燃气具热电火焰监控装置检测

发布日期: 2024-06-21 17:34:53 - 更新时间:2024年06月29日 15:22

燃气具热电火焰监控装置检测项目报价?  解决方案?  检测周期?  样品要求?

点 击 解 答  

CJ/T 30-2013热电式燃具熄火保护装置

本标准规定了热电式燃具熄火保护装置(以下简称“熄火保护装置”)的术语和定义、分类、结构和材料、要求、试验方法、检验规则、标识、安装和操作说明书、包装、运输和贮存。本标准适用于标明大工作压力在10 kPa以下,公称连接尺寸不大于DN50,并使用符合GB/T 13611规定的城镇燃气器具上用热电式燃具熄火保护装置。本标准也适用于:--由热电势驱动的、能被单独测试的、用于热电式燃具熄火保护装置的电磁阀;--火焰传感用的热电偶;--使用辅助能的热电式燃具熄火保护装置(例如外部提供的电能)。

CJ/T 187-2013燃气蒸箱

本标准规定了以城镇燃气为燃料的燃气蒸箱的术语和定义,分类和型号,结构和材料,要求,试验方法,检验规则,标识,警示和使用说明书以及包装、运输和贮存。本标准适用于额定热负荷不大于80kW、蒸腔蒸汽压力不大于500Pa(表压)的燃起蒸箱(以下简称蒸箱)。本标准所指城镇燃气为符合GB/T 13611的燃气。

CJ/T 336-2010冷凝式家用燃气快速热水器

本标准规定了加热生活用水的冷凝式家用燃气快速热水器的分类和型号、材料和结构、要求、试验方法、验收规则及标志和说明书、包装、运输和贮存。本标准适用于除人工煤气之外符合GB/T 13611规定燃气、额定热输入不大于70kW的强制排气式冷凝热水器、强制给排气式冷凝热水器和室外型冷凝热水器。

DB31/T 907-2015工商燃气供应工程技术规程

本标准规定了工商燃气供应工程中燃气供应系统、计算方法、燃气设备、供气管道、燃具和用气设备、信息远传和自动控制系统和竣工验收与运行维护的要求。本标准适用于以天然气和管道液化石油气为气源的工商燃气用户的燃气供应工程,包括用户调压器、过滤器、计量装置、预警和自动处置系统、直至燃具和用气设备等所有工商用户终端应用的燃气设施、以及其连接的管道系统和涉及安全、节能环保、卫生和公共利益的自动控制与远传监测系统。

DIN EN 624-2011专用LPG器具规范.在车辆和船舶上安装的室内密封LPG空间加热装置;德文版本EN 624-2011

This European standard specifies the characteristics of safety, construction, performance and efficiency, the test methods and marking, of room sealed space heating equipment of types C(see CEN/TR 1749)with combustion air intake and outlet for the products of combustion in the wall, roof of floor,combined or not.

DIN EN 1458-1-2012标称热输入不超过6kW的B22D和B23D型家用直接燃气式滚筒干衣机.第1部分:安全

This European Standard specifies the requirements and test methods for the construction, safety and marking of domestic direct gas-fired tumble dryers, of types B22D and B23D, of nominal heat input not exceeding 6 kW, hereafter referred to as \"appliances\". This European Standard does not apply to: a) catalytic combustion appliances; b) appliances designed exclusively for industrial purposes; c) appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere; d) appliances of the condensing type wherein the heated air and products of combustion used for the drying process are dehumidified by cooling with water or air; e) appliances intended to be used in vehicles or on board ships or aircraft. This European Standard covers type testing only.

上一篇:燃气具自动切断阀门检测 下一篇:燃气加热餐饮设备检测
以上是中析研究所燃气具热电火焰监控装置检测检测服务的相关介绍,如有其他检测需求可咨询在线工程师进行了解!

京ICP备15067471号-35版权所有:北京中科光析科学技术研究所