工业用电缆卷盘检测

工业用电缆卷盘检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB 19517-2009电气设备安全技术规范

本标准适用于交流额定电压1200V以下、直流额定电压1500V以下的各类电气设备。本标准不适用于：本规范规定的电气设备的材料和辅助材料除外;不能独立使用的半成品或初级产品;用于医疗目的的电气设备;爆炸环境中使用的电气设备;电梯;电栅栏激发器;船舶、飞行器和铁路等特殊电气设备。

GB/T 24976-2023电器附件环境意识设计导则

本文件给出了电器附件产品环境意识设计的原则和内容，提供了将环境意识设计的要素引入设计和开发的指导。本文件适用于下列类别电器附件产品的环境意识设计，其他类别的电器附件产品参照使用：——电缆管理用电气导管和槽管系统；——家用和类似用途电缆卷盘；——工业用插头插座和耦合器；——家用和类似用途插头插座；——家用和类似用途器具耦合器；——家用和类似用途低压电器用连接器件；——家用和类似用途固定式电气装置的开关。

GB/T 34135-2017工业用电缆卷盘

本标准规定了工业用电缆卷盘的结构、机械性能、电气性能等技术要求。本标准适用于工业、户外和户内使用，额定工作电压不超过690 V d.c.或a.c.和500 Hz a.c.，额定电流不超过63 A的装有一根不可拆卸软电缆的电缆卷盘。电缆卷盘所使用的电器附件应符合GB/T 11918.1或GB/T 11918.2的要求。本标准适用于：——配备符合GB/T 11918.1或GB/T 11918.2的一个插头或器具输入插座和至少一个输出插座的移动式电缆卷盘；——至少配备有符合GB/T 11918.1或GB/T 11918.2的一个输出插座的固定电缆卷盘；——使用环境温度通常在-25 ℃~+40 ℃之间。工业电缆卷盘可用于建筑工地、农业生产、商业及家庭。本标准同时适用于在特低电压装置上使用的电缆卷盘。在特殊环境下，如船舱、车辆和类似其他场合，或容易发生爆炸的地点，可能要有附加要求。

GB/T 36028.2-2018靠港船舶岸电系统技术条件 第2部分:低压供电

GB/T 36028的本部分规定了靠港船舶岸电系统低压供电(低压上船)的结构、一般要求、技术要求及检验。本部分适用于港口低压供电形式的靠港船舶岸电系统。

GB 50016-2014(2018)建筑设计防火规范(2018年版)

本规范适用于下列新建、扩建和改建的建筑：厂房；仓库；民用建筑；甲、乙、丙类液体储罐(区)；可燃、助燃气体储罐(区)；可燃材料堆场；城市交通隧道。人民防空工程、石油和天然气工程、石油化工工程和火力发电厂与变电站等的建筑防火设计，当有专门的标准时，宜从其规定。本规范不适用于火药、炸药及其制品厂房(仓库)、花炮厂房(仓库)的建筑防火设计。

GB 50295-2016水泥工厂设计规范

本规范适用于新建、改建和扩建水泥工厂的设计。

GB 50974-2014消防给水及消火栓系统技术规范

本规范适用于新建、扩建、改建的工业、民用、市政等建设工程的消防给水及消火栓系统的设计、施工、验收和维护管理。

GB 51062-2014煤矿设备安装工程施工规范

本规范适用于煤矿建设及生产系统设备安装工程的施工。

JC/T 834-2011水泥工业用堆料机.技术条件

本标准规定了水泥工业用堆料机的技术要求、试验方法、检验规则、标志、包装运输和贮存。本标准适用于预均化堆场对松散物料进行堆料的水泥工业用卸料车式堆料机和悬臂带式堆料机（以下简称堆料机）。

JC/T 835-2011水泥工业用取料机.技术条件

本标准规定了水泥工业用取料机（以下简称取料机）的技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于预均化堆场对松散物料进行取料的水泥工业用桥式斗轮取料机、桥式刮板取料机和悬臂刮板取料机。

MH/T 6100-2013飞机管线加油车

本标准规定了民用机场的飞机管线加油车的技术要求、试验方法、检验规则及产品标志、包装、运输、储存等要求。本标准适用于民用机场的飞机管线加油车(以下简称加油车)的制造与验收。

MH/T 6101-2013飞机罐式加油车

本标准规定了民用机场的飞机罐式加油车的技术要求、试验方法、检验规则及产品标志、包装、运输、储存等要求。本标准适用于民用机场的飞机罐式加油车(以下简称加油车)的制造与验收。

SN/T 3020.1-2011进出口电器附件检验规程.第1部分：通用要求

本部分规定了进出口电器附件的抽样、检验及结果判定。本部分适用于以下六大类电器附件产品的检验:—电缆管理系统类；—插头和插座类；—开关类；—连接器件类；—藕合器类；—安装盒类。本部分不适用于已发布SN检验规程的电器附件的检验。

UL 1776-2002高压清洗机

These requirements cover inverters ,converters ,charge controllers ,and output controllers intended for use in stand-alone(not grid connected) or utility-interactive (grid-connected) power systems .Utility-interactive inverters and converters are intended to be installed in parallel with an electric supply system or an electric utility to supply common loads.

DIN EN ISO 13628-10-2007石油和天然气工业.水下开采系统的设计和操作.第10部分:连接柔性管规范

The text has been taken over as ISO 13628-10:2005.

DIN EN ISO 13628-11-2008石油和天然气工业.水下生产系统的设计和操作.第11部分:水下和海上用软管系统

This part of ISO 13628 provides guidelines for the design, analysis, manufacture, testing, installation andoperation of flexible pipes and flexible pipe systems for onshore, subsea and marine applications. This part ofISO 13628 supplements ISO 13628-2 and ISO 13628-10, which specify minimum requirements for the design,material selection, manufacture, testing, marking and packaging of unbonded and bonded flexible pipe,respectively.This part of ISO 13628 applies to flexible pipe assemblies, consisting of segments of flexible pipe body withend fittings attached to both ends. Both bonded and unbonded pipe types are covered. In addition, this part ofISO 13628 applies to flexible pipe systems, including ancillary components.The applications covered by this part of ISO 13628 are sweet- and sour-service production, including exportand injection applications. This part of ISO 13628 applies to both static and dynamic flexible pipe systemsused as flowlines, risers and jumpers. This part of ISO 13628 does cover, in general terms, the use of flexiblepipes for offshore loading systems.NOTE Refer also to Reference [30] for offshore loading systems.This part of ISO 13628 does not cover flexible pipes for use in choke and kill lines or umbilical and controllines.

BS EN 12921-1-2005+A1-2010使用液体或蒸气的工业设备的表面清洁和预处理机器.通用安全性要求

1.1 This standard applies to machines for surface cleaning and pre-treatment – in the following called\"cleaning machines\" – of industrial items using liquids or vapours, i.e. stationary machines and relatedequipment for automated and manual cleaning and pre-treatment processes.NOTE Cleaning machines are operated with or without heating, for example as dipping or spraying or vapourcondensation process, where additional using of ultrasound is possible. These cleaning machines could be designed assingle-zone or multi-zone machine, chamber machines, drum cleaning machine, low lift truck machines, round timemachines or tunnel (continuous) machines.To the extent of this document, cleaning machines for industrial items are considered as an assembly of thefollowing equipment: pump(s) and/or other mechanical system of agitation, recirculation and spraying of cleaning liquid; forced ventilation system; heating system with temperature control; condensation system; filtration and separation system and/or solid particles extraction from the liquid; conveyor and/or handling system for the items to be processed; product handling systems and reciprocators which are part of the cleaning machine; control and/or monitoring systems; liquid handling system.1.2 This European Standard deals with the common significant hazards, hazardous situations and eventsrelevant to cleaning machines for industrial items using liquids or vapours when they are used as intendedand under the conditions foreseen by the manufacturer (see clause 4). This part of the standard defines thecommon safety requirements for all kinds of cleaning machines for industrial items using liquids or vapoursand related common devices and should be used in connection with other parts of the EN 12921-series. Thespecific requirements specified in part 2 and following parts of EN 12921 take precedence over the respectiverequirements in EN 12921.NOTE In addition, where a cleaning machine is not covered by a specific part of this document, part 1 of EN 12921can be used to establish the approach for dealing with the relevant risks.Specific hazards which are related to the type of cleaning liquid used are dealt with in the followingdocuments: EN 12921-2 for water based cleaning liquids; EN 12921-3 for flammable cleaning liquids; prEN 12921-4 for halogenated solvents.1.3 ! This standard is not applicable to machines for:− mobile portable cleaning,− high pressure cleaning with high pressure water jet according to prEN 1829-1,− conveyor dishwashing according to EN 50416,− surface cleaning employing liquids according to EN 60335-2-54,− commercial electric dishwashing according to EN 60335-2-58,− cleaning with high pressure and steam according to EN 60335-2-79,− plasma cleaning,− mechanical blasting,− thermal cleaning,− drying processes,− cleaning of textiles or clothes,− food processing.This standard is not applicable to the following equipment:− loading and unloading systems,− automatic systems, e.g. robots as covered by EN ISO 10218-1,− centrifuges as covered by EN 12547,− pumps and pump units for liquids as covered by EN 809.\"1.4 This standard is not applicable to cleaning machines for industrial items which are manufactured beforethe date of publication of this document by CEN.