欢迎访问中科光析科学技术研究所官网!

免费咨询热线
|
工业用途太阳滤光片检测项目报价? 解决方案? 检测周期? 样品要求? |
点 击 解 答 ![]() |
本标准给出了激光产品的安全使用佳指南,涉及所有由受激发射过程而产生光辐射的装置、组件或系统(不包括发光二极管LEDs)。本标准能够帮助相关人员识别危险、评估风险,适用于与激光安全有关的工作和负有安全职责的人员。
本标准规定了测定黑白航空片感光度和平均斜率的方法,包括测试原理、仪器、取样、曝光及冲洗,密度测量的一般要求,计算方法等内容。 本标准适用于黑白航空片的感光度及平均斜率测定。本标准不适用于黑白红外航空片感光度的测定。
GB 10810的本部分规定了对任意材料的眼镜镜片及相关眼镜产品的透射比特性的要求。本部分适用于相关眼镜产品,包括:配装成镜、装成太阳镜、太阳镜镜片、驾驶用镜、偏光镜、着(染)色镜、光致变色镜等。 本部分不适用于: ——用于医疗目的的具有特殊透射或吸收特性的眼镜镜片。
本标准规定了光学基本术语,几何光学、物理光学、像质评定、光学零部件及工艺、光学仪器名称、光学测量及产品技术要求等方面的术语共1028条。 本标准适用于光学仪器标准制定、技术文件编制、教材和书刊编写及文献翻译等。
本标准规定了海洋学的常用基本术语及其定义。本标准适用于海洋管理、科研、教学及相关生产活动。
本标准对评估灯和灯系统,包括各种灯具的光学生物安全性给与指导。对于所有非相干宽带点光源,也包括发光二级管(LED)但不包括激光,在200nm至3000nm波长范围的光学辐射的光生物危害的评估和控制,本标准对曝辐射限值参考测量技术和分级计划进行了明确规定。
GB 32166的本部分规定了职业眼面部防护具的分类、基本要求和特殊要求。本部分适用于在职业眼面部防护中(主要是工业防护)用于保护眼部或面部安全的平光防护具或部件。本部分不适用于:a) 一般用途太阳镜和太阳镜片或带有视力矫正效果的眼面部防护具;b) 患者在进行诊断或治疗时用来防护曝光的眼面部防护具;c) 直接观测太阳的产品,如观测日食等的眼部防护具;d) 运动眼面部防护具;e) 短路电弧眼面部防护具;f) 焊接眼面部防护具;g) 激光眼面部防护具。
1.0.1为规范电子工程建设的基本术语及其定义,实现术语标准化,制定本标准。1.0.2本标准适用于电子工程建设的规划、咨询、设计、工程监理、工程管理等工程服务以及教学、科研及其他相关领域。1.0.3电子工程建设文件、图纸、科技文献使用的术语,除应符合本标准外,尚应符合现行有关标准的规定。
本标准规定了民用飞机航空电子设备的完整性要求及其验证要求,并对规定的要求与验证要求给出了理由、导则和经验。本标准适用于民用飞机航空电子设备的研制。
本规范规定了采用激光大气传输的军用通信机的技术要求、质量保证规定和交货准备等。 本规范适用于户外环境下使用的激光大气通信机。其它用途的激光大气通信机也可参照采用。
The passive radio astronomy service (RAS) is studying natural phenomena producing radio emissions at frequencies fixed by the laws of nature. Primary allocations have been made to various space services in the Earth-to-space direction such as the fixed-satellite service (FSS), radionavigation-satellite service (RNSS), mobile-satellite service (MSS) and broadcasting-satellite service (BSS) in bands adjacent or nearby to bands allocated to the RAS.
This European Standard specifies requirements and test methods for goggles for use by all motorcycle and moped drivers and passengers, intended for eye-protection during the use of motorcycle and moped, both on the road and for off-road sport or leisure use, subject to the following exclusion. The goggles for official races and competitions are not included within the scope of this standard.
This European Standard specifies procedures for the measurement and assessment of personal exposures to visible (VIS) and infrared (IR) radiation emitted by artificial sources, where adverse effects cannot be readily excluded. NOTE 1 Adverse effects will normally not occur in exposures caused by normal lighting or room heating. This European Standard applies to VIS- and IR- exposures in indoor and outdoor workplaces. It does not apply to VIS- and IR-exposures in leisure time. This European Standard does not apply to VIS- and IR- exposures caused by the sun. NOTE 2 Part 3 of this standard will deal with UV-exposures caused by the sun.This European Standard does not specify VIS- and IR-exposure limit values. It supports the application of limitvalues set by national regulations or international recommendations.This European Standard applies to VIS- and IR- exposures by artificial incoherent sources, which emitspectral lines as well as continuous spectra. This European Standard does not apply to coherent radiationsources.NOTE 3 Coherent optical radiation sources are covered by standards for lasers, like EN 60825-1 etc.This European Standard applies to visible (VIS) and infrared (IR) radiation exposures in the wavelength band380 nm to 3 pm. It also applies to radiation exposures that may present a blue-light hazard in the wavelengthband 300 nm to 700 nm.This European Standard does not apply to other effects of which the action spectra lie solely within theUV-region 180 nm to 400 nm.NOTE 4 Part 1 of EN 14255 addresses these effects.This European Standard does not apply to radiation emissions of products.NOTE 5 For radiation emissions of products other standards apply, such as EN 12198 for radiation emissions ofmachinery, EN 60335-2-27 for household appliances for skin exposures to ultraviolet and infrared radiation and CIE S009for the safety of lamps and lamp systems.This European Standard does not apply to heat stress, i.e. long term heating of the humans body with strain ofthe cardiac/circular system caused by climatic environmental conditions including VIS/IR radiation.
This European standard specifies the essential requirements of sodium chloride (salt) for spreading on roads for winter maintenance and includes tests of these requirements. The requirements are specified for salt in crystallized form and for salt in solution (brine), which is delivered to the customer.
This part of ISO 105 specifies a method intended for determining the effect on the colour of the textiles of all kinds and in all forms to the action of an artificial light source representative of natural daylight (D65). The method is also applicable to white (bleached or optically brightened) textiles. This method allows the use of two different sets of blue wool references. The results from the two different sets of references may not be identical.
DIN EN ISO 105-B10 specifies a procedure for exposing textiles to artificial weathering in xenon-arc apparatus, including the action of liquid water and water vapour, in order to determine the weather resistance of the colour of textiles.
This International Standard specifies reference test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear.
This part of ISO 12312 applies to all afocal (plano power) products intended for direct observation of the sun, such as solar eclipse viewing. This part of ISO 12312 does not apply to the following: - afocal (plano power) sunglasses and clip-ons for general use intended for protection against solar radiation; - eyewear for protection against radiation from artificial light sources, such as those used in solaria; - eye protectors specifically intended for sports (e. g. ski goggles or other types); - sunglasses that have been medically prescribed for attenuating solar radiation; - prescription sunglass lenses.
前沿科学
微信公众号
中析研究所
抖音
中析研究所
微信公众号
中析研究所
快手
中析研究所
微视频
中析研究所
小红书