抑制电磁干扰用无源滤波装置检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 10250-2007船舶电气与电子设备的电磁兼容性

本标准规定了船舶电气与电子设备的发射、抗扰度和性能准则的电磁兼容性(EMC)的低要求，有助于满足海事组织(以下简称IMO)A．813决议的要求(参见附录A)。依据本标准进行试验和安装的设备满足相关的IM0要求。注1：本标准的规范性内容已作为EMC系列标准中的一个标准。注2：本标准未涉及对人员的影响。本标准针对测量方法给出了进一步的指南和建议，来实现下列各组设备中的电气与电子装置的电磁兼容性。 A组：无线电通信和导航设备 B组：发电和变电设备 C组：以脉动能量工作的设备 D组：开关设备和控制系统 E组：内部通信和信号处理设备 F组：非电气零件和设备 G组：综合系统 IEC 60945是A组和C组的基础EMC标准。注：本标准没有具体说明诸如对电击和设备介电(强度)试验时保护的非安全操作和基本安全要求。

GB/T 50789-2012±800kV直流换流站设计规范

本规范适用于±800kV两端直流输电系统换流站工程的设计。

GB/T 51200-2016高压直流换流站设计规范

本规范适用于±660kV及以下每极采用一个12脉动阀组接线的两端高压直流输电系统换流站和背靠背换流站工程的设计。

GB 51204-2016建筑电气工程电磁兼容技术规范

本规范适用于新建、扩建和改建的民用建筑和一般工业建筑的电气工程电磁兼容的设计、施工、检测及验收。

JGJ 243-2011交通建筑电气设计规范

本规范适用于新建、扩建、改建的以客运为主的民用机场航站楼、交通枢纽站、铁路旅客车站、城市轨道交通站、磁浮列车站、港口客运站、汽车客运站等交通建筑电气设计，不适用于飞机库、油库、机车站、行业专用货运站、汽车加油站等的电气设计。

JGJ 310-2013教育建筑电气设计规范

本规范适用于新建、扩建和改建的各级各类学校校园电气总体设计及供教学活动所使用建筑物的电气设计。

DL/T 1194-2012电能质量术语

本标准规定了与电能质量有关的基本名词、术语及定义。本标准适用于电力行业电能质量技术和管理的有关领域。

IEC 60939-1-2010抑制电磁干扰用无源滤波装置.第1部分:通用规范

This generic specification relates to passive filter units for electromagnetic interference suppressionfor use within, or associated with, electronic or electrical equipment and machines.Both single and multi-channel filters within one enclosure are included within the scope of thisgeneric specification.Filters constructed of capacitive elements where the inductance is inherent in the constructionof the filter are within the scope of this specification. Similarly, filters constructed of inductiveelements where the capacitance is inherent in the construction of the filter are also within thescope of this generic specification. The manufacturer should state whether a given componentis to be designed as a capacitor, an inductor or a filter.The filter units within the scope of this generic specification are further distinguished as thosefor which safety tests are appropriate (e.g. those connected to mains supplies) and those forwhich such tests are not appropriate. A separate sectional specification covers the passivefilter units for which safety tests are appropriate.This generic specification establishes standard terms, inspection procedures and methods oftest for use in sectional and detail specifications within the IECQ-CECC system for electroniccomponents.

IEC 60939-2-1-2004抑制无线电干扰用整套滤波装置.第2-1部分:空白详细规范.抑制电磁干扰用无源过滤装置.安全试验所需的过滤器(评定等级D/DZ)

Is a supplementary document to the sectional specification and contains requirements for style and layout and minimum content of detail specifications. In the preparation of detail specifications, the content of 1.4 of the sectional specification shall be taken into account. The use of IEC 60939-2-2 may be more appropriate for components where approval and requalification tests contribute considerably to the cost of the product, whereas the employment of this specification may be necessary for components manufactured in mass production. This specification offers the assessment levels D and DZ (Zero defect).

IEC 60939-2-2-2004抑制无线电干扰用整套滤波装置.第2-2部分:空白详细规范.抑制电磁干扰用无源过滤装置.安全试验所需的过滤器(仅用于安全试验)

Forms the basis for a uniform procedure for a common Safety Mark. It implements the approval schedule for the safety test described in IEC 60939-2, requires a declaration of design for parameters relevant to safety and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design.

IEC 60939-2-2005抑制电磁干扰用无源滤波装置.第2部分:分规范:安全试验恰当的无源滤波装置.试验方法和一般要求

Applies to passive filter units for electromagnetic interference suppression which fall within the scope of the Generic Specification IEC 60939-1. The scope of this Sectional specification is restricted to passive filter units for which safety tests are appropriate. This implies that filters specified according to this Sectional specification will either be connected to mains supplies, when compliance with the mandatory tests of Table 3 is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety tests are required.

IEC 60939-2 CORR 1-2005抑制电磁干扰用无源滤波装置.第2部分:分规范.适用于安全试验的无源滤波装置.试验方法和一般要求.勘误1

This standard is Passive filter units for electromagnetic interference suppression - Part 2: Sectional specification: Passive filter units for which safety tests are appropriate - Test methods and general requirements; Corrigendum 1

GSO IEC 60939-1-2015电磁干扰抑制用无源滤波装置.第1部分：总规范

This generic specification relates to passive filter units for electromagnetic interference suppression for use within, or associated with, electronic or electrical equipment and machines. Both single and multi-channel filters within one enclosure are included within the scope of this generic specification. Filters constructed of capacitive elements where the inductance is inherent in the construction of the filter are within the scope of this specification. Similarly, filters constructed of inductive elements where the capacitance is inherent in the construction of the filter are also within the scope of this generic specification. The manufacturer should state whether a given component is to be designed as a capacitor, an inductor or a filter. The filter units within the scope of this generic specification are further distinguished as those for which safety tests are appropriate (e.g. those connected to mains supplies) and those for which such tests are not appropriate. A separate sectional specification covers the passive filter units for which safety tests are appropriate. This generic specification establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications within the IECQ-CECC system for electronic components.

GSO IEC 60939-2-2-2014无线电干扰抑制用完整滤波装置.第2-2部分：空白详细规范.电磁干扰抑制用无源滤波装置.要求进行安全试验的滤波器（仅限安全试验）

IEC 60939-2-2:2004 forms the basis for a uniform procedure for a common Safety Mark. It implements the approval schedule for the safety test described in IEC 60939-2, requires a declaration of design for parameters relevant to safety and prescribes conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design.

GSO IEC 60939-2-2014电磁干扰抑制用无源滤波装置第2部分：分规范适用于安全试验的无源滤波装置试验方法和一般要求

This Sectional specification applies to passive filter units for electromagnetic interference suppression which fall within the scope of the Generic Specification IEC 60939-1. The scope of this Sectional specification is restricted to passive filter units for which safety tests are appropriate. This implies that filters specified according to this Sectional specification will either be connected to mains supplies, when compliance with the mandatory tests of Table 3 is necessary, or used in other circuit positions where the equipment specification prescribes that some or all of these safety tests are required. This Sectional specification applies to passive filter units which will be connected to an a.c. mains or other supply with a nominal voltage not exceeding 1 000 V a.c., with a nominal frequency not exceeding 400 Hz, or 1 000 V d.c.