燃气器具调压器检测

燃气器具调压器检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 30597-2014燃气燃烧器和燃烧器具用安全和控制装置通用要求

本标准规定了使用GB/T 13611规定的城镇燃气的燃气燃烧器和燃烧器具用安全和控制装置及其组件(以下简称“控制装置”)的术语和定义、分类和分组、结构和材料、要求、试验方法、标识、安装和操作说明书、包装、运输和贮存。本标准适用于以下控制装置:--自动和半自动阀;--燃烧控制装置;--熄火保护装置;--燃气和空气比例调节装置;--压力调节装置;--旋塞阀总成;--温度控制装置;--多功能控制装置;--压力传感装置;--阀门检验系统。

GB 35848-2018商用燃气燃烧器具

本标准规定了商用燃气燃烧器具(以下简称燃具)的术语和定义，分类和型号，要求，试验方法，检验规则，标志、警示和说明书，包装、运输和贮存。本标准适用于以符合GB/T 13611规定的燃气为能源，燃烧用空气取自室内、燃烧产物直接或间接排向室外的燃具，包括：a)　额定热负荷不大于80 kW、蒸汽压力不大于80 kPa，且设计正常水位水容积小于30 L的蒸汽发生器类燃具；b)　额定热负荷不大于80 kW、蒸腔蒸汽压力不大于500 Pa的蒸箱类燃具；c)　额定热负荷不大于50 kW、腔体内压力不大于80 kPa的炸炉类燃具；d)　额定热负荷不大于50 kW的煮食炉类燃具；e)　额定热负荷不大于80 kW、锅口有效直径不小于600 mm的大锅灶类燃具；f)　额定热负荷不大于10 kW的煲仔炉，额定热负荷不大于50 kW的矮汤炉等平头炉类燃具；g)　额定热负荷不大于100 kW的常压固定式沸水器类燃具；h)　焖饭量大于等于6L的饭锅类燃具；i)　额定热负荷不大于50 kW的洗碗机类燃具；j)　额定热负荷不大于60 kW的炒灶类燃具；k)　额定热负荷不大于50 kW的烧烤炉类燃具；l)　额定热负荷不大于35 kW的热板炉类燃具；m)　额定热负荷不大于80 kW的烤箱类燃具；n)　以上产品的组合体。

GB/T 36699-2018锅炉用液体和气体燃料燃烧器技术条件

本标准规定了锅炉用液体和气体燃料燃烧器的分类与型号编制、组成与基本配置、基本要求、性能要求、设计与制造、检验、试验与检测、技术文件与标识、包装、运输和贮存、安装、调试与使用等方面的技术要求。本标准适用于锅炉用液体和气体燃料的强制鼓风燃烧器和自然通风燃烧器。电站锅炉启动燃烧器、各类工业窑炉与工业加热炉及其他用途燃烧器可参照本标准执行。

GB/T 50811-2012燃气系统运行安全评价标准

本规范适用于已正式投产运行的面向居民、商业、工业企业、汽车等领域燃气系统的现状安全评价。本标准不适用于燃气的生产、城市门站以前的天然气管道输送，以及沼气、秸秆气的生产和使用。

GB/T 50851-2013建设工程人工材料设备机械数据标准

本标准适用于编制建设工程计价依据及收集、整理、分析、上报、发布建设工程工料机价格信息。

CJ/T 29-2019燃气沸水器

本标准规定了以符合GB/T 13611的城镇燃气为燃料的常压固定式燃气沸水器的分类和型号，结构和材料，性能要求，试验方法，检验规则，标志、警示和使用说明书，以及包装、运输和贮存。本标准适用于制备饮用水的，额定热负荷不大于100 kW的室内常压固定式非冷凝式燃气沸水器(以下简称“沸水器”)。

CJ/T 30-2013热电式燃具熄火保护装置

本标准规定了热电式燃具熄火保护装置(以下简称“熄火保护装置”)的术语和定义、分类、结构和材料、要求、试验方法、检验规则、标识、安装和操作说明书、包装、运输和贮存。本标准适用于标明大工作压力在10 kPa以下,公称连接尺寸不大于DN50,并使用符合GB/T 13611规定的城镇燃气器具上用热电式燃具熄火保护装置。本标准也适用于:--由热电势驱动的、能被单独测试的、用于热电式燃具熄火保护装置的电磁阀;--火焰传感用的热电偶;--使用辅助能的热电式燃具熄火保护装置(例如外部提供的电能)。

CJ/T 113-2015燃气取暖器

本标准规定了燃气取暖器(以下简称取暖器)的术语和定义,分类与型号,结构和材料,要求,试验方法,检验规则,标识和说明书,包装、运输和贮存。本标准适用于使用GB/T 13611规定的燃气的取暖器,包括:a) 额定热输入不大于20 kW的家用取暖器;b) 单个燃烧器额定热输入不大于120 kW的非家用取暖器。本标准不适用于室外使用的取暖器、冷凝式取暖器、专为工业用途设计的取暖器、在移动的运输交通工具中使用的取暖器。

CJ/T 132-2014家用燃气燃烧器具用自吸阀

本标准规定了家用燃气燃烧器具用自吸阀(以下简称自吸阀)的术语和定义、分类和分组、结构和材料、要求、试验方法、标识、安装和操作说明书、检验规则、包装、运输和贮存。本标准适用于大工作压力不大于10 kPa,公称尺寸不大于DN32,工作电压不大于DC 6V,仅以电池驱动的,使用GB/T 13611规定的城镇燃气器具用自吸阀。

CJ/T 336-2010冷凝式家用燃气快速热水器

本标准规定了加热生活用水的冷凝式家用燃气快速热水器的分类和型号、材料和结构、要求、试验方法、验收规则及标志和说明书、包装、运输和贮存。本标准适用于除人工煤气之外符合GB/T 13611规定燃气、额定热输入不大于70kW的强制排气式冷凝热水器、强制给排气式冷凝热水器和室外型冷凝热水器。

CJ/T 393-2012家用燃气器具旋塞阀总成

本标准规定了家用燃气器具旋塞阀总成（以下简称阀总成）的术语和定义，分类，要求，试验方法，检验规则，标识和使用说明，包装、运输和贮存。本标准适用于标明大工作压力在10 kPa以下，公称尺寸不大于DN25,使用GB/T 13611规定的城镇燃气器具上的旋塞阀总成。

CJ/T 398-2012家用燃气用具电子式燃气与空气比例调节装置

本标准规定了家用燃气用具电子式燃气与空气比例调节装置的术语和定义、缩略语、结构和材料、要求、试验方法、检验规则、标识、安装和操作说明书以及包装、运输和贮存。本标准适用于大工作压力在10kPa以下、公称直径不大于DN50、使用GB/T 13611规定的城镇燃气器具用、闭环控制的能被单独测试或作为燃气用具（或燃烧器）部件进行测试的家用燃气用具电子式燃气与空气比例调节装置。

CJ/T 451-2014商用燃气燃烧器具通用技术条件

本标准规定了商用燃气燃烧器具(以下简称燃具)的术语和定义,分类,结构和材料,要求,试验方法,检验规则,标识、警示和使用说明书,包装、运输和贮存。本标准适用于商用厨房等使用,以符合GB/T 13611规定的燃气为能源,安装在室内、燃烧产物机械排至室外的燃烧器具。

DB31/T 1011-2016燃气用户设施安全检查技术要求

本标准规定了术语和定义、基本要求、检查内容、记录等内容。本标准适用于居民用户和供气压力＜0.01 MPa的非居民用户使用的燃气用户设施的安全检查。

EN 30-1-1-2008家用燃气灶具.第1-1部分:安全性.一般性;包含修改件A1-2010

This European Standard specifies the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of freestanding and built-in domestic cooking appliances burning the combustible gases given in 4.1 according to the categories specified in 4.2, referred to in the text as \"appliances\".This European Standard covers the following types of domestic cooking appliances, as defined in Clause 3, and belonging to the classes defined in 4.3 (see Table 1): independent freestanding hotplates; independent built-in hotplates; independent hotplates and grills; table cookers; freestanding ovens; built-in ovens; freestanding or built-in grills; griddles; freestanding cookers; built-in cookers. Unless specifically excluded hereafter,This European Standard applies to these appliances or their component parts, whether or not the component parts are independent or incorporated into a single appliance, even if the other heating components of the appliance use electrical energy (e. g. combined gas-electric cookers).This European Standard includes requirements covering the electrical safety of equipment incorporated in the appliance that is associated with the use of gas. It does not include requirements covering the electrical safety of electrically-heated component parts or their associated equipment1).This European Standard does not apply to: a) outdoor appliances; b) appliances connected to a combustion products evacuation duct; c) appliances having a pyrolitic gas oven; d) appliances having covered burners which are not in conformity with the constructional requirements of 5.2.8.2.2; e) appliances incorporating flame supervision devices and having an automatic ignition device for which the duration of the ignition attempt is limited by design; f) appliances equipped with a burner that is periodically ignited and extinguished under the control of an automatic on/off device; 1) Refer to the electrical safety rules. g) appliances equipped with an oven and/or with a grill having a fan: 1) either for the supply of combustion air or for the evacuation of the products of combustion; 2) or for the circulation of the products of combustion within the compartments; h) appliances supplied at pressures greater than those defined in 7.; i) appliances having one or more burners that are capable of remote operation (type1 or type 2), unless the burner(s) concerned are thermostatically controlled oven burners of time-controlled ovens that are designed for a delayed start without the user being present; j) appliances incorporating one or more hotplate or grill burners that enable the user to program the cooking cycle, including the start and/or the end of the cycle.This European Standard does not cover the requirements relating to third family gas cylinders, their regulators and their connection.This European Standard only covers type testing.

EN 88-1-2011燃气器具用压力调节器和相关安全装置.入口压力大为50 kPa及以下的压力调节器

This European Standard specifies the safety, construction and performance requirements for pressure regulators and pneumatic gas/air ratio pressure regulators (zero pressure regulators are included as a special type of pneumatic gas/air ratio pressure regulator), intended for use with gas burners, gas appliances and similar use, hereafter referred to as `pressure regulators'.This European Standard is applicable to pressure regulators with declared maximum inlet pressures up to and including 50 kPa (500 mbar) of nominal connection sizes up to and including DN 250 for use with one or more fuel gases in accordance with EN 437, pressure regulators which use auxiliary energy, pneumatic gas/air ratio pressure regulators, which function by controlling a gas outlet pressure in response to an air signal pressure, air signal differential pressure, and/or to a furnace pressure signal (zero pressure regulators are included as a special type of pneumatic gas/air ratio pressure regulator), gas/air ratio pressure regulators which change an air outlet pressure in response to a gas signal pressure or a gas signal differential pressure.This European Standard does not cover pressure regulators connected directly to gas distribution network or to a container that maintains a standard distribution pressure, pressure regulators intended for gas appliances to be installed in the open air and exposed to the environment, mechanically linked gas/air ratio controls, electronic gas/air ratio controls (EN 12067-2).

EN 1319-2009净加热输入量不超过70kW的带有风扇辅助锅炉的家用空间加热燃气强制对流空气加热器

This European Standard specifies the requirements and test methods for the safety and efficiency of domestic gas-fired air heaters with a fan to assist the transportation of combustion air and/or combustion products, hereafter referred to as appliances.This European Standard applies to Type B12, B12AS, B12BS, B13, B13AS, B13BS, B14, B14AS, B14BS, B22, B23, B42, B42AS, B42BS, B43, B43AS, B43BS, B44, B44AS, B44BS, B52, B53, C12, C13, C32, C33, C62 and C63 appliances with an input not exceeding 70 kW (net cv basis), intended primarily for use in single unit residential dwellings. Provision of the heated air may be by means of ducting.This standard does not apply to: a) appliances of the condensing type; b) appliances for outdoor installation; c) dual purpose air conditioning appliances (heating and cooling); d) appliances where the air is heated by an intermediate fluid; e) appliances with forced draught package burners or fully premixed burners; f) appliances fitted with a manual means of adjusting the combustion air supply or the evacuation of the combustion products; g) portable or transportable forced convection appliances; h) appliances having multiple heating units with a single draught diverter; i) appliances fitted with more than one flue outlet; j) Type C22, C23, C42, C43, C52 and C53 appliances; k) appliances that are designed for continuous condensation within the flue system under normal operating conditions; l) appliances having combustion products evacuation ducts, POCEDs, that are non-metallic.This standard is applicable to appliances which are intended to be type tested. It also includes requirements concerning the evaluation of conformity, including factory production control, but these requirements only apply to POCEDs and their associated terminals.