家用燃气储水式热水器检测

家用燃气储水式热水器检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 16662-2008建筑给水排水设备器材术语

本标准规定了建筑给水排水设备和器材，包括卫生器具，水嘴，加压、调节和贮存设备，加热贮热设备，地漏，检查井，建筑水处理设备，游泳池、游乐池设备，冷却设备，水景设备，雨水利用设备，管材，管件，阀门，计量、检测仪表等方面的专用术语。本标准适用于建筑给水排水设备和器材的专用术语。

GB 50352-2019民用建筑设计统一标准

本标准适用于新建、扩建和改建的民用建筑设计。

GB/T 50801-2013可再生能源建筑应用工程评价标准

1.0.1 为了贯彻落实在建筑中应用可再生能源、保护环境的有关法规政策，增强社会应用可再生能源的意识，促进我国可再生能源建筑应用事业的健康发展，指导可再生能源建筑应用工程的测试与评价，制定本标准。1.0.2 本标准适用于应用太阳能热利用系统、太阳能光伏系统、地源热泵系统的新建、扩建和改建工程的节能效益、环境效益、经济效益的测试与评价。1.0.3 在进行可再生能源建筑应用’工程测试与评价时，除应符合本标准要求外，尚应符合现行有关标准的规定。

GB/T 50811-2012燃气系统运行安全评价标准

本规范适用于已正式投产运行的面向居民、商业、工业企业、汽车等领域燃气系统的现状安全评价。本标准不适用于燃气的生产、城市门站以前的天然气管道输送，以及沼气、秸秆气的生产和使用。

GB/T 51188-2016建筑与工业给水排水系统安全评价标准

本标准适用于新建、扩建、改建和既有建筑与工业的给水排水系统安全评价。本规范不适用于军工等特殊行业建筑与工业的给水排水系统安全评价。

CECS 364-2014建筑燃气安全应用技术导则

本导则适用于运行压力不大于0. 8MPa的建筑燃气工程建设。

CJ/T 336-2010冷凝式家用燃气快速热水器

本标准规定了加热生活用水的冷凝式家用燃气快速热水器的分类和型号、材料和结构、要求、试验方法、验收规则及标志和说明书、包装、运输和贮存。本标准适用于除人工煤气之外符合GB/T 13611规定燃气、额定热输入不大于70kW的强制排气式冷凝热水器、强制给排气式冷凝热水器和室外型冷凝热水器。

CJJ 51-2016城镇燃气设施运行、维护和抢修安全技术规程

本规程适用于城镇燃气厂站、管网、用户燃气设施、监控及数据采集系统等城镇燃气设施的运行、维护和抢修。本规程不适用于汽车加气站的运行、维护和抢修。

SN/T 3085-2012进口旧电子电气产品检验 技术要求.通则

本标准规定了进口旧电子电气产品的电器电气安全、机械安全、电磁兼容、环境保护、能源效率等的检验技术要求的通则。本标准适用于以下用于国内销售使用的旧电子电气产品：——大型家用电器产品；——小型家用电器产品；——信息和通讯产品：——音视频产品；——照明产品；——电气和电子工具（大型静态工业工具除外）；——玩具、休闲和运动产品；——医用产品（所有被植入和被感染的产品除外）；——监测和控制设备；——自动售货机。产品示例见附录A。

JGJ/T 288-2012建筑能效标识技术标准

本标准适用于民用建筑能效标识。

DIN 1988-200-2012饮水装置实用规程. 第200部分: 安装类型A(封闭系统). 计划, 部件, 器械, 材料; DVGW实用规程

This draft standard describes the code of practice for planning and construction of drinking water systems in houses and properties as well as the components, apparatus and materials which are to use. It supplements DIN EN 806-2 and gives additional specifications considering national laws, regulations and German Technical Rules.

DIN EN 89-2015生成家用热水的燃气蓄热热水器;德文版本EN 89-2015

This European Standard defines the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment and classification and marking of gas-fired storage water heaters for domestic hot water uses. This standard applies to appliances :a) of types B11, B11BS, C11, C12, C13, C21, C31, , C32, C33, C42, C43, C51,C52, C53, C62, C63, C72, C73, C81 connected to an individual flue duct, C82 and C83; b) fitted with atmospheric burners; c) using one or more combustible gases corresponding to the three gas families and the pressures indicated in EN 437; d) of nominal heat input not exceeding 150 kW (net calorific value); e) using or not the water condensation heat in the combustion products; f) fitted with electrically operated mechanical flue dampers that are positioned downstream of the heat exchanger and tested as an integral part of the water heater; g) appliances whether subject to the water mains pressure or open-circuit.

BS 5546-2010额定输入不超过70kW的家用燃气供热水装置的安装和维修规范

This British Standard specifies requirements for the selection,installation, inspection, commissioning and maintenance of gas‑firedwater-heating appliances, which have a rated heat input notexceeding 70 kW, based on net calorific value.It applies to water-heating appliances utilizing 1st, 2nd or 3rd familygases designed to operate in the condensing or non‑condensingmode for the supply of hot water for domestic purposes in domesticdwellings or domestic dwellings in commercial premises.This standard does not apply to:a) water-heating appliances with a rated input of over 70 kW;b) hot water supply systems in multiple dwellings supplied from acentral source.It does not cover the detailed design and installation of the whole hotwater distribution system, which was specified in BS 5449.This standard applies to water-heating appliances which carry aCE mark and also to previously used water-heating appliances whichdo not carry the CE mark (see 5.3.1).

BS EN 13203-3-2010燃气家用产热水器.不超过70 kW热输入的器具和500 l水存储容器.能量消耗评定

This European Standard is applicable to solar supported gas-fired appliances producing domestic hot water. Itapplies to a system marketed as single unit or a system fully specified by a manufacturer that: has a gas heat input not exceeding 70 kW; and has a hot water storage capacity not exceeding 500 l; and is equipped with at least one solar collector; and is, with regard to the solar hydraulic circuit, considered as a forced circulation system (definition accordingto EN ISO 9488:1999).The appliances covered by this European Standard are described in Annex C.This European Standard does not apply to thermo-siphon or integral collector storage systems (definitionsaccording to EN ISO 9488-1999).NOTE In principle, the energy consumption of thermo-siphon solar preheat systems and integral collector storagepreheat systems can also be assessed on the basis of this standard. One appropriate procedure for that purpose is tocalculate the temperature level of the domestic hot water withdrawn from the thermal solar system for the referenceconditions defined in this standard by using the numerical system model and the thermal solar system performanceparameters according to ISO 9459-5. Based on the temperature level of the hot water withdrawn from the store the energyconsumption of the gas appliance should be determined. This determination can either be done by means of calculationsor by performing a test according to EN 13203-2 and using instead of the cold water inlet temperature the hot watertemperature withdrawn from the store.This standard is not intended to assess the performance: of the solar collector(s), which should comply with EN 12975-1 and EN 12975-2; and thermal solar systems and components, which should comply with EN 12976-1 and EN 12976-2.This European Standard, EN 13203-3, sets out a method for assessing the energy performance of a solarsupported appliance. It defines a number of daily tapping cycles for each domestic hot water use, kitchen,shower, bath and a combination of these, together with corresponding test procedures including informationabout the available solar radiation. It enables the energy performances of different gas-fired appliances to becompared and matched to the needs of the user.

ANSI Z21.5.1-2006燃气衣物干燥器、卷I、 1型干衣机(与CSA 7.1b相同)

Details test and examination criteria for Type 1 clothes dryers for use with natural, manufactured or mixed gases, liquefied petroleum gases or LP gas-air mixtures.

ANSI Z21.75-2007室外燃气器具和人造住宅的连接器

Details test and examination criteria for connectors suitable for non-rigid connection of outdoor gas appliances not frequently moved after installation, or manufactured (mobile) homes to gas supply lines containing natural, manufactured, mixed and lique