供水设施的装置和设备检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 24293-2009数控恒温水嘴

本标准规定了数控恒温水嘴的术语和定义、分类和标记、使用条件、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于公称压力不大于0.6MPa、热水温度不大于85℃，安装在盥洗室(洗手间、浴室)、厨房、医院、宾馆等使用场所，出水温度受预设温度控制的数控恒温水嘴。

CJ/T 406-2012不锈钢水嘴

本标准规定了不锈钢水嘴（以下简称水嘴）的分类、产品结构、材料、配套装置、要求、试验方法、检验规则、标志、合格证书和使用说明书、包装、运输和贮存。本标准适用于公称尺寸不大于DN20、公称压力不大于0.6MPa、介质温度不大于90℃的不锈钢水嘴。

SN/T 1503-2005国境卫生检疫标准编写基本规则术语和定义

本标准规定了国境卫生检疫行业中常见术语的定义或涵义。本标准适用于国境卫生检疫行业标准的编写和实施。

ISO 3822-1-1999声学供水设施的装置和设备发射的噪声的实验室测试第1部分:测量方法

This part of EN ISO 3822 specifies a method of measurement, in the laboratory, of the noise emission resulting from the flow of water through appliances and equipment used in water supply installations.nThe items covered include draw-off taps, in-line valves and special appliances, for example pressure reducers and water-heating appliances, all of which are hereafter referred to as "appliances".nThe method specified makes it possible to obtain comparable results of measurements in different laboratories.

ISO 3822-1 AMD 1-2008声学.供水设施的装置和设备发射噪音的实验室试验.第1部分:测量方法.修改件1:不确定性测量

Amendment 1 to ISO 3822-1:1999 was prepared by Technical Committee ISO/TC 43, Acoustics,Subcommittee SC 2, Building acoustics.

ISO 3822-2-1995声学供水设施的装置和设备发射的噪声的实验室测试第2部分:放水龙头和混合阀的安装和工作条件

Describes the mounting and operating conditions to be used for draw-off taps and mixing valves when measuring noise emmission resulting from water flow. Replaces the first edition, which has been technically revised.

ISO 3822-4-1997声学供水设施的装置和设备发射的噪声的实验室测试第4部分:专用器件的安装和工作条件

Gives the mounting and operating conditions to be used for a number of in-line valves and appliances, when measuring the noise emission resulting from water flow. Replaces the first edition.

EN ISO 3822-1-1999声学.用于供水设施的装置和设备发出的噪音的实验室试验.第1部分测量方法.包含修改件A1-2008

This part of EN ISO 3822 specifies a method of measurement, inThe laboratory, of the noise emission resulting fromThe flow of water through appliances and equipment used in water supply installations.The items covered include draw-off taps, in-line valves and special appliances, for example pressure reducers and water-heating appliances, all of which are hereafter referred to as "appliances".The method specified makes it possible to obtain comparable results of measurements in different laboratories.

NF S31-014-3-2018声学.供水设施用装置和设备发射噪声的实验室试验.第3部分:管路阀门和器件的安装和工作条作

Domaine d'applicationLe présent document spécifie les conditions de montage de fonctionnement à utiliser pour les robinetteries et les équipements hydrauliques en ligne qui contrôlent le débit, la pression ou la température de l'eau dans les installations de distribution d'eau, quand le bruit émis résultant de l'écoulement de l'eau est mesuré.Il est applicable aux robinetteries et aux équipements hydrauliques en ligne de dimension nominale DN 32 et aux dispositifs dans lesquels le débit d'eau maximal ne dépasse pas 1,6 l/s.NOTEVoir l'ISO 6708; DN est le symbole de " diamètre nominal ". Le nombre désignant le diamètre nominal est relié de façon approximative au diamètre intérieur (en millimètres) des robinetteries et équipements en ligne.Les modes opératoires décrits sont en général utilisés pour tous les types de robinetteries en ligne de conception conventionnelle.

TS EN ISO 3822-1-2005声学. 用于供水设施的装置和设备发出的噪音的实验室试验. 第1部分: 测量方法

This standard specifies a method of measurement, in the laboratory, of the noise emission resulting from the flow of water through appliances and equipment used in water supply installations.

TS EN ISO 3822-1/A1-2013声学. 用于供水设施的装置和设备发出的噪音的实验室试验. 第1部分: 测量方法. 修改件1: 测量不确定度

This part of EN ISO 3822 specifies a method of measurement, in the laboratory, of the noise emission resulting from the flow of water through appliances and equipment used in water supply installations. The items covered include draw-off taps, in-line valves and special appliances, for example pressure reducers and water-heating appliances, all of which are hereafter referred to as "appliances". The method specified makes it possible to obtain comparable results of measurements in different laboratories.

TS EN ISO 3822-2-1997声学. 用于供水设施的装置和设备发出的噪音的实验室试验. 第2部分: 抽水龙头和混合阀的安装和操作条件

This standard of specifies the mounting and operating conditions tobe used for draw off taps when measuring noise emission resulting from water flow.

TS EN ISO 3822-3-2002声学. 用于供水设施的装置和设备发出的噪音的实验室试验. 第3部分: 用于管道阀门和电器的安装和操作条件

This standard, specifies the mounting and operating conditions to be used for in line valves and appliances which control the flow, pressure or temperature of the water in water supply installations when measuring noise emission resulting from water flow.

TS EN ISO 3822-3-2018声学. 供水设施的装置和设备发射噪音的实验室试验. 第3部分: 直插式阀门和设备的安装和操作条件

This document specifies the mounting and operating conditions to be used for in-line valves and appliances which control the flow, pressure or temperature of the water in water supply installations, when measuring noise emission resulting from water flow.

TS EN ISO 3822-3/A1-2013声学. 用于供水设施的装置和设备发出的噪音的实验室试验. 第3部分: 用于管道阀门和电器的安装和操作条件

This part of EN IS0 3822 specifies the mounting and operating conditions to be used fur in-line valves and appliances which control the flow, pressure or temperature of the water in. water supply installations, when measuring noise emission resulting from water flow It is applicable to in-line valves and appliances of maximum nominal size DN 32 1) and to systems in which the maximum water flow rate does not exceed 2 Vs. The procedure described are for general use for all types of in-line valves of conventional design.

TS EN ISO 3822-4-2002声学. 用于供水设施的装置和设备发出的噪音的实验室试验. 第4部分: 特殊管件的连接和操作条件

This standard specifies the mounting and operating coinditions to be used for a number of appliances which cannot be regarded as draw-off or in line valves, when measuring the noise emission resulting form water flow