尿酸测定试剂盒检测

GB 4789.9-2014食品安全标准 食品微生物学检验 空肠弯曲菌检验

本标准规定了食品中空肠弯曲菌(Campylobacter jejuni)的检验方法。本标准适用于食品中空肠弯曲菌的检验。

GB/T 29791.1-2013体外诊断医疗器械 制造商提供的信息（标示） 第1部分:术语、定义和通用要求

GB/T 29791的本部分对体外诊断医疗器械制造商所提供的信息定义概念、建立一般原则并规定基本要求。语言属于法律和法规范畴,本部分不予讨论。本部分不适用于:a) 性能评价用体外诊断医疗器械(如仅供研究用);b) 仪器标记;c) 材料安全性数据表。

GBZ/T 254-2014尿中苯巯基尿酸的液相色谱测定方法

本标准规定了尿中苯巯基尿酸浓度的检测方法。本标准适用于职业接触苯作业工人尿中苯巯基尿酸浓度的测定。

YY/T 1207-2013尿酸测定试剂盒(尿酸酶过氧化物酶偶联法)

本标准规定了尿酸测定试剂盒(尿酸酶过氧化物酶偶联法)的要求、试验方法、标识、标签和使用说明书、包装、运输和贮存等。本标准适用于尿酸测定试剂盒(尿酸酶过氧化物酶偶联法)的质量控制。

WS 271-2007感染性腹泻诊断标准

本标准规定了除霍乱、痢疾、伤寒、副伤寒以外的感染性腹泻的诊断依据、诊断原则、诊断和鉴别诊断。本标准适用于各级各类医疗卫生机构及其工作人员对感染性腹泻的诊断和报告。

WS/T 498-2017细菌性腹泻临床实验室诊断操作指南

本标准规定了粪便等肠道标本临床微生物学检验的技术要求。本标准适用于开展粪便等肠道标本细菌培养、鉴定和药敏试验的临床实验室。

SN/T 1086-2011牛生殖道弯曲杆菌病检疫技术规范

本标准规定了牛生殖道弯曲杆菌病的检疫技术要求。本标准适用于牛生殖道弯曲杆菌病病原的分离鉴定,可用于该病的检疫、诊断和流行病学调查。

SN/T 1221-2016鸡传染性支气管炎检疫技术规范

本标准规定了鸡传染性支气管炎的临床症状与病理变化、病毒的分离与培养、反转录-聚合酶链式反应、微量血凝试验和微量血凝抑制试验、酶联免疫吸附试验、气管环组织培养和血清中和试验检测方法。本标准适用于进出境鸡传染性支气管炎的诊断和检疫。

DIN EN ISO 18113-1-2013体外诊断医疗器械.制造商提供的信息(标签).第1部分:术语、定义和一般要求(ISO 18113-1-2009).德文版本EN ISO 18113-1-2011

This part of ISO 18113 defines concepts, establishes general principles and specifies essential requirements for information supplied by the manufacturer of IVD medical devices.This part of ISO 18113 does not address language requirements, since that is the domain of national laws and regulations.This part of ISO 18113 does not apply toa)IVD devices for performance evaluation (e.g., for investigational use only),b)instrument marking,c)material safety data sheets.

BS 1427-2009水分析用现场试验方法指南

This British Standard describes information and guidance on testmethods for the analysis of industrial and other waters which areapplicable outside of a conventional laboratory as either in situon‑site tests; or the use of a close suitable designated room/areatesting facility. For some tests this could include dedicated spacein a designated vehicle or caravan. These test methods can relateto compliance, water quality and process control purposes. Norecommendation is given as to which test is applicable to a particulartype of water, nor is it implied that in any given case all tests or anyparticular suite of tests are necessary. The selection of tests depends onlocal requirements and conditions. Samples requiring preservation forsubsequent analysis are outside of the scope of this British Standard.Certain tests such as adsorbable organic halides (AOX), chemicaloxygen demand (COD), total organic carbon (TOC) and total nitrogenneed a suitable designated test room/area facility and are notconsidered suitable for testing outside of these designated areas.Sample stability is not considered to be a significant problem as mosttest-kit measurements are carried out with minimal delay.Most of the methods described in this standard can be applicable foruse on clean or lightly polluted waters which might have undergonetreatment or been modified for industrial use. Typically, the types ofwaters for which the tests are intended include the following:a) boiler waters;b) cooling waters;c) waters from hot water systems;d) waters from air conditioning systems;e) waters from industrial air washing systems;f) potable waters;g) ground waters;h) surface waters;i) process waters; andj) swimming pool waters.Certain more heavily polluted waters can be routinely tested forcertain control purposes for specific determinands using the testmethods cited in this British Standard. Such waters include:1) sewage works influents and effluents;2) selected industrial effluents.Emergency screening analysis for major pollution incidents is notcovered (see commentary).The on‑site methods outlined in this British Standard includetitrimetric, colorimetric and instrumental analytical techniques andalso includes consideration of commercial test-kits: their generalprinciples and formats available. It is generally accepted that in theUK, the vast majority of on‑site measurements are carried out usingcommercial test-kits rather than user-devised test-kit type methodsfollowing similar equivalent method procedures to those used inconventional laboratories. Also the designated room/area testingfacility titrimetric methods described in Section 4 of this standardmight require staff with a greater degree of training than commercialtest-kit titrimetric methods which can be readily used outside of theseareas. These methods are less likely to be used by non‑analysts thanthe more robust test-kit titrimetric methods.The technique used and principle of the designated room/area testingfacility titrimetric method are described within each test method andeach method is self‑contained within a standard format.This British Standard does not apply to radioactivity, ecotoxicity (SeePersoone et al., 2000 [4]) or microbiological testing. Spot tests are notcovered (Jungris, 1997 [5]).Many of the relevant methods are suitable for analysis for the waterframework directive (see Note and SWIFT 2003 [6]), water for humanconsumption (see Note) and for monitoring of discharges to waterand sewer (EA, 2006 [7] and Dixon and Gardner, 1997 [8]).