悬索桥索鞍索夹检测

悬索桥索鞍索夹检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB 50460-2015油气输送管道跨越工程施工规范

本规范适用于新建或改、扩建的油气输送管道跨越人工或天然障碍物工程的施工。不适用于沿既有桥梁敷设管道。

GBJ 124-1988道路工程术语标准

本标准适用于道路的设计、施工、科研、养护等方面。

CJJ 2-2008城市桥梁工程施工与质量验收规范

本规范适用于一般地质条件下城市桥梁的新建、改建、扩建工程和大、中修维护工程的施工与质量验收。

CJJ/T 275-2018市政工程施工安全检查标准

本标准适用于市政工程施工安全生产的检查评定。

JT/T 694-2007悬索桥主缆系统防腐涂装技术条件

本标准规定了悬索桥主缆系统（含钢丝绳吊索、索夹、索鞍及辅助结构）防腐涂装的术语和定义、技术要求、检测、验收、涂装养护及维修、安全、卫生和环境保护等。 本标准适用于悬索桥主缆系统的初始涂装、维护性涂装和涂装劣化后的重新涂装。

JT/T 903-2014悬索桥索鞍索夹

本标准规定了悬索桥索鞍、索夹产品的分类、型号、结构及成形方式、技术要求、试验方法、检验规则、标志、包装、运输与储存等。本标准适用于悬索桥全铸式、铸焊式索鞍和全铸式索夹,其他形式的索鞍、索夹可参照使用。

JTG D64-2015公路钢结构桥梁设计规范

本规范适用于各等级公路钢结构桥梁和桥梁钢结构设计。

JTG/T D65-05-2015公路悬索桥设计规范

本规范适用于新建和改建各级公路跨径在2 000m以下的地锚式悬索桥设计。本规范采用以分项系数表达的极限状态设计方法。

JTG/T J22-2008公路桥梁加固设计规范

本规范适用于各类公路桥梁以恢复使用功能、提高承载能力、增强安全性和耐久性为目的的加固设计。一般养护工程可参照使用。

DB50/ 231-2006重庆市城市桥梁养护技术规程

本标准规定了城市桥梁养护的技术标准。本规程适用于重庆市所辖各区、县（自治县、市）所在地及建制镇城市规划范围内跨江河桥梁，城市道路上的跨线桥、高架桥、立交桥、人行桥。本规程不包括城市桥梁上灯饰、绿化的养护。城市区域内住宅小区、企事业单位、工业、旅游景点等区域的桥梁养护可参照本规程执行。本规程不适用于轻轨高架桥的养护。

DB50/T 279-2008桥梁工程防雷技术规范

本标准规定了桥梁工程防雷的术语和定义、防雷设计、防雷施工、工程质量验收、维护与管理等内容。本标准主要适用于新（改、扩）建悬索桥、斜拉桥和中下乘式拱桥等桥梁工程的防雷设计、施工和验收以及防雷装置的维护和管理。

EN 1993-1-11-2006欧洲法规3.钢结构设计.第1-11部分:带受拉构件结构设计.合并勘误表-2009年4月

This standard also gives rules for determiningThe technical requirements for prefabricated tensioncomponents for assessingTheir safety, serviceability and durability.

DIN EN 1993-1-11-2010欧洲法规 3:钢结构设计.第1-11部分:带拉伸构件结构的设计;德文版本EN 1993-1-11-2006 + AC-2009

prEN 1993-1-11 gives design rules for sructures with tension components made of steel,which, due to their connections with the structure, are adjuctable and replaceable see Table 1.1

BS EN 1993-1-11-2006欧洲法规3.钢结构的设计.带受拉构件结构的设计

prEN1993-1-11 gives design rules for structures with tension components made of steel, which, due to their connections with the structure, are adjustable and replaceable see Table 1.1.NOTE: Due to the requirement of adjustability and replaceability such tension components are generally prefabricated products delivered to site and installed into the structure. Tension components that are not adjustable or replaceable, e.g. air spun cables of suspension bridges, or for externally post-tensioned bridges, are outside the scope of this part. However, rules of this standard may be applicable. This standard also gives rules for determining the technical requirements for prefabricated tension components for assessing their safety, serviceability and durability.NOTE 1: Group A products in general have a single solid round cross section connected to end terminations by threads. They are mainly used as– bracings for roofs, walls, girders– stays for roof elements, pylons– tensioning systems for steel-wooden truss and steel structures, space framesNOTE 2: Group B products are composed of wires which are anchored in sockets or other end terminations and are fabricated primarily in the diameter range of 5 mm to 160 mm, see EN 12385-2.Spiral strand ropes are mainly used as– stay cables for aerials, smoke stacks, masts and bridges– carrying cables and edge cables for light weight structures– hangers or suspenders for suspension bridges– stabilizing cables for cable nets and wood and steel trusses– hand-rail cables for banisters, balconies, bridge rails and guardrailsFully locked coil ropes are fabricated in the diameter range of 20 mm to 180 mm and are mainly used as– stay cables, suspension cables and hangers for bridge construction– suspension cables and stabilizing cables in cable trusses– edge cables for cable nets– stay cables for pylons, masts, aerialsStructural strand ropes are mainly used as– stay cables for masts, aerials– hangers for suspension bridges– damper / spacer tie cables between stay cables– edge cables for fabric membranes– rail cables for banister, balcony, bridge and guide rails.NOTE 3: Group C products need individual or collective anchoring and appropriate protection.Bundles of parallel wires are mainly used as stay cables, main cables for suspension bridges and external tendons.Bundles of parallel strands are mainly used as stay cables for composite and steel bridges.(4) The types of termination dealt with in this part for Group B and C products are– metal and resin sockets, see EN 13411-4– sockets with cement grout– ferrules and ferrule securing, see EN 13411-3– swaged sockets and swaged fitting– U-bolt wire rope grips, see EN 13411-5– anchoring for bundles with wedges, cold formed button heads for wires and nuts for bars.NOTE: For terminology see Annex C.