移动式斜切锯检测

移动式斜切锯检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB 19517-2009电气设备安全技术规范

本标准适用于交流额定电压1200V以下、直流额定电压1500V以下的各类电气设备。本标准不适用于：本规范规定的电气设备的材料和辅助材料除外;不能独立使用的半成品或初级产品;用于医疗目的的电气设备;爆炸环境中使用的电气设备;电梯;电栅栏激发器;船舶、飞行器和铁路等特殊电气设备。

GB 30461-2013木工机床安全 带锯机

本标准规定了手动或自动上下料的木工带锯机(以下简称机床)上去除危险和限制风险的要求和/或措施。本标准适用于切削实木、刨花板、纤维板、胶合板和有塑料贴面或贴边材料的机床。本标准包括与该机床有关的所有危险,详见第4章。本标准不适用于手持式机床和台式机床(按GB 13960.1和GB 13960.6的规定)。本标准不包括由其他加工带来的危险(例如,铣削和圆锯切削)。

GB 50012-2012Ⅲ、Ⅳ级铁路设计规范

本规范适用于新建、改建Ⅲ、Ⅳ级标准轨距铁路的设计。

QB/T 1693-1993制浆造纸机械设备术语

本标准规定了有关制浆造纸工业专用机械设备的术语、词汇。t本标准运用于制浆造纸工业专用机械设备的名称、产品标准、教材及其他有关技术文件。

IEC 62841-3-9-2020手持式电动操作工具, 移动式工具以及草坪和园艺机械. 安全. 第3-9部分: 移动式斜切锯的特殊要求

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable mitre saws intended to be used with a toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals except magnesium with a saw blade diameter not exceeding 410 mm, which hereinafter might simply be referred to as saw or tool. This International Standard does not apply to mitre saws intended to cut other metals, such as magnesium, steel and iron. This document does not apply to mitre saws with an automatic feeding device. NOTE 101 Transportable saws intended to cut ferrous metals will be covered by a future part of IEC 62841-3. This document does not apply to saws designed for use with abrasive wheels. NOTE 102 Transportable tools designed for use with abrasive wheels are covered by IEC 62841-3-10. This document does not apply to tools combining the function of a mitre saw with the function of a table saw. NOTE 103 Transportable tools combining the function of a mitre saw with the function of a table saw are covered by a future part of IEC 62841-3.

NF C75-132-3-9-2016电动操作工具. 粉尘测量规程. 第3-9部分: 移动式斜切锯的详细要求

L'article de la Partie 1 est applicable avec l'exception suivante:

DIN EN 1870-5-2013木工机械安全. 圆盘锯床. 第5部分:圆盘锯机床/向上横切切割锯床; 德文版本EN 1870-5-2002+A2-2012

This document deals with all significant hazards,hazardous situations and events as listed in Clause 4 which are relevant to circular saw benches/up-cutting cross-cut sawing machines,hereinafter referred to as "machines",designed to cut solid wood,chipboard,fibreboard,plywood and also these materials if (where) they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.

DIN EN 1870-16-2013木工机械安全. 圆盘锯床. 第16部分:V切割用双斜角锯床; 德文版本EN 1870-16-2012

This European Standard specifies all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to double mitre sawing machines for V-cutting with a maximum cutting capacity (width and height) of < =200 mm,fitted or not with pneumatic systems,hereinafter referred to as the machine,designed to cut solid wood, chipboard,fibreboard or plywood and also these materials where they are covered with plastic laminate or edgings,when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.

DS/EN 61029-2-11-2013移动式电动工具的安全性 - 第2-11部分:组合斜切锯和台锯的特殊要求

Applies to combined mitre-bench saws intended for cutting non-ferrous metals such as aluminium, wood or similar materials. The blade diameter does not exceed 350 mm.

DS/EN 61029-2-11/A11-2013移动式电动工具的安全性 - 第2-11部分:组合斜切锯和台锯的特殊要求

Applies to combined mitre-bench saws intended for cutting non-ferrous metals such as aluminium, wood or similar materials. The blade diameter does not exceed 350 mm.

JIS C9029-2-9-2006移动式电动工具的安全.第2-9部分:斜切锯的特殊要求

この規格の適用範囲は，JIS C 9029-1の1.によるほか，次による。