圆盘锯床检测

圆盘锯床检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

EN 1870-5-2002木工机械的安全.圆盘锯床.第5部分:向上/横切切割锯床;包含修改件A1-2009

This document deals with all significant hazards; hazardous situations and events as listed in Clause 4 which are relevant to circular saw benches/up-cutting cross-cut sawing machines; hereinafter referred to as \"machines\"; designed to cut solid wood; chipboard; fibreboard; plywood and also these materials if (where) they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse.This document does not apply to: hand-held motor-operated electric tools or any adaptation permitting their use in a different mode; i.e. bench mounting; NOTE 1 Hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor-operated electric tools are covered by EN 60745-1:2006 together with EN 60745-2-5:2007. machines set up on a bench or a table similar to a bench; which is intended to carry out work in a stationary position; capable of being lifted by one person by hand. NOTE 2 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2000 together with EN 61029-2-1:2002.This document is not applicable to machines which are manufactured before the date of issue of this EN. NOTE 3 Circular saw benches are dealt with in prEN 1870-19:2011. NOTE 4 Machines covered byThis document are listed under of Annex IV of the Machinery Directive.

EN 1870-10-2013木工机械安全性.圆盘锯床.第10部分:单片自动和半自动上切及横切锯床

This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable single blade automatic and semi-automatic up-cutting cross cut sawing machines with one sawing unit herein after referred to as \"machines\" designed to cut solid wood, chipboard, fibreboard, plywood and also these materials if they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to work wood based materials may also be used for working hardened plastic materials with similar physical characteristics as wood. For the definition of stationary and displaceable machine see 3.2.4 and 3.2.5. Any work piece positioning equipment fitted to the machine is included in this document. This document does not apply to machines designed for cross cutting logs. This document is not applicable to machines which are manufactured before the date of its publication as EN. NOTE Machines covered by this document are listed under of Annex IV of the Machinery Directive.

EN 1870-11-2013木工机械安全性.圆盘锯床.第11部分:带单锯的自动和半自动水平横切锯床(旋臂锯)

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to semi-automatic horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws), hereinafter referred to as \"machines\", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials when covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to work wood based materials may also be used for working rigid plastic materials with similar physical characteristics as wood. Any work-piece positioning equipment fitted to the machine is included in this European Standard. This European Standard does not apply to machines: a) with manual feed of the saw unit; or b) for cross cutting logs; or c) specifically designed for sawing and/or milling roof timber frames; or d) fitted with hydraulic braking systems. NOTE 1 Radial arm saws with manual feed of the saw unit (the saw unit is moved by hand) are dealt with in EN 1870-17:2012 and EN 61029-2-2:2009. NOTE 2 The requirements of this European Standard apply to all machines whatever their method of control, e. g. electromechanical and/or electronic. This European Standard is not applicable to machines which are manufactured before the date of its publication as EN. NOTE 3 Machines covered by this European Standard are listed under of Annex IV of the Machinery Directive.

EN 1870-12-2013木工机械安全性.圆盘锯床.第12部分:摆动式横切锯

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to pendulum cross-cut sawing, herein after referred to as 'machines', designed to cut solid wood, chipboard, fibreboard, plywood and also these materials when covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. This European Standard does not apply to: a) machines for cross cutting logs; b) machines where the saw unit can be rotated about a horizontal axis. NOTE The requirements of this European Standard apply to all machines whatever their method of control e. g. electromechanical and/or electronic. This European Standard is primarily directed at machines which are manufactured after the date of its publication as EN.

EN 1870-19-2013木工机械安全性.圆盘锯床.第19部分:圆锯架(带及不带滑台)和建筑工地锯

This European Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to stationary and displaceable circular saw benches (with or without sliding table and/or demountable power feed unit) and building site saws, hereinafter referred to as \"machines\", designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, if they are covered with plastic edging and/or plastic/light alloy laminates, when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Machines which are designed to cut wood-based material may also be used for cutting hardened plastic materials with similar physical characteristics as wood. NOTE 1 For the definition of stationary and displaceable machine see 3.2.9 and 3.2.10. NOTE 2 Circular saw benches are used for ripping, cross cutting, dimensioning and grooving. Building site saws are used for ripping, cross cutting and dimensioning. The requirements of this document apply also to machines designed for grooving with a width not exceeding 20 mm in one pass by using a milling tool. This document does not apply to: a) machines set up on a bench or a table similar to a bench, which are intended to carry out work in a stationary position, capable of being lifted by one person by hand. The bench can also be an integrated part of the machine if it consists of hinged legs which can be extended down; b) hand held woodworking machines including any adaptation permitting their use in a different mode, i.e. bench mounting. NOTE 3 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2009 together with EN 61029-2-1:2012; a hand-held motor-operated electric tool and a saw bench to form an integrated whole are covered by EN 60745-1:2009 together with EN 60745-2-5: 2010. For the purpose of this document, building site saws having a tiltable spindle are considered to be circular saw

NF E64-607-3-2015木工机械的安全性.圆盘锯床.第3部分:向下切削横割锯和两用向下切削横割锯/圆盘锯床

La présente norme européenne traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, tels qu'énumérés à l'Article 4, qui sont applicables aux tronçonneuses à coupe descendante et tronçonneuses mixtes à coupe descendante et à scies circulaires à table de menuisier, ci-après désignées \"machines\", conçues pour la coupe de bois massif, de panneaux de particules, de panneaux de fibres, de contreplaqué ainsi que ces matériaux lorsque leurs surfaces ou leurs chants sont recouverts de matière plastique et/ou de plastique/alliages légers stratifiés, lorsqu'elles sont utilisées comme prévu et dans les conditions prévues par le fabricant, incluant une mauvaise utilisation raisonnablement prévisible.NOTE 1 Pour la définition des tronçonneuses à coupe descendante et des tronçonneuses mixtes à coupe descendante et à scies circulaires à table de menuisier, voir 3.2.2, 3.2.3 et 3.2.4, et pour la définition de machine transportable, voir 3.2.8.Le présent document ne s'applique pas aux :- machines conçues pour le tronçonnage de grumes ;- machines-outils à moteur électrique portatives, ou toute adaptation permettant leur utilisation de manière différente, par exemple fixées sur un établi ;NOTE 2 Les machines-outils à moteur électrique portatives et les scies à table de menuisier destinées à former un ensemble intégré avec des machines-outils à moteur électrique portatives sont couvertes par l'EN 60745-1:2009 conjointement avec l'EN 60745-2-5:2010.- machines transportables montées sur un établi ou une table similaire à un établi, qui sont conçues pour réaliser un travail en position fixe, qui peuvent être soulevées à la main par une seule personne, c'est-à-dire d'une masse maximale = 25 kg.NOTE 3 Les outils électriques à moteur transportables sont couverts par les prescriptions de l'EN 61029-1:2009 conjointement avec l'EN 61029-2-9:2009 et l'EN 61029-2-11:2009.Le présent document n'est pas applicable aux tronçonneuses à coupe descendante et tronçonneu

NF E64-607-6-2017木工机械的安全性.圆盘锯床.第6部分:木柴用圆盘锯床

La présente Norme européenne traite de tous les phénomènes dangereux, situations et événements dangereux significatifs, tels qu'énumérés à l'Article 4, qui sont applicables aux scies circulaires à bois de chauffage, à chargement et/ou déchargement manuel, à chariot actionné à la main, ci-après désignées \" machines \", conçues pour la coupe de bois massif, lorsqu'elles sont utilisées comme prévu et dans les conditions prévues par le fabricant, incluant une mauvaise utilisation raisonnablement prévisible.

NF E64-607-16-2012木工机械安全性.圆盘锯床.第16部分:V切割用双斜角锯床

La présente norme européenne spécifie tous les phénomènes dangereux, les situations et évènements dangereux, tels qu'énumérés à l'Article 4, qui sont applicables aux tronçonneuses doubles à coupe en V de capacité de coupe maximale (largeur et hauteur) < ou = 200 mm, équipées ou non de systèmes pneumatiques, ci-après désignées \"machines\", conçues pour la coupe de bois massif, de panneaux de particules, de panneaux de fibres ou de contreplaqué ainsi que ces matériaux lorsqu'ils sont recouverts de plastique stratifié ou de bordure plastique, lorsqu'elles sont utilisées comme prévu et dans les conditions prévues par le fabricant, incluant une mauvaise utilisation raisonnablement prévisible.Les prescriptions du présent document s'appliquent aux tronçonneuses doubles à coupe en V fixes et transportables (voir 3.3.3 et 3.3.4).Les prescriptions du présent document s'appliquent à toutes les machines, quel que soit leur système de commande, par exemple électromécanique et/ou électronique.Le présent document ne s'applique pas aux tronçonneuses semi-fixes ou toute adaptation permettant leur utilisation dans un mode différent, c'est à dire montées sur un bâti.Le présent document ne s'applique pas aux tronçonneuses doubles à coupe en V équipées de systèmes hydrauliques. Le présent document ne s'applique pas aux tronçonneuses doubles à coupe en V fabriquées avant la date de sa publication comme EN.

TS EN 1870-3-2015木工机械安全. 圆盘锯床. 第3部分: 下横切锯和两用下横切锯/圆锯台

This standard sets out the requirements and/or measures to remove the hazards and/or limit the risk on single blade manual, semi automatic and automatic down cutting cross-cut saws, manual down and horizontal cutting cross-cut saws and dual purpose machine used for down cutting and in circular sawbench mode, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials, when these are covered with plastic laminate or edgings. It covers all of the hazards relevant to these machines. It does not apply to machines for cross cutting round logs or to hand held woodworking machines or any adaption permitting their use in a diferent mode, i.e. bench mounting.

TS EN 1870-5+A2-2014木工机床安全. 圆盘锯床. 第5部分: 圆盘锯机床/向上横切切割锯床

This Standard deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to circular saw benches/up-cutting cross-cut sawing machines, hereinafter referred to as machines, designed to cut solid wood, chipboard, fibreboard, plywood and also these materials if (where) they are covered with plastic edging and/or plastic/light alloy laminates when they are used as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. This European Standard does not apply to: hand-held motor-operated electric tools or any adaptation permitting their use in a different mode, i.e. bench mounting; NOTE 1 Hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand-held motor-operated electric tools are covered by EN 60745-1:2006 together with EN 60745-2-5:2007. machines set up on a bench or a table similar to a bench, which is intended to carry out work in a stationary position, capable of being lifted by one person by hand. NOTE 2 Transportable motor-operated electric tools are covered by the requirements of EN 61029-1:2000 together with EN 61029-2-1:2002. deleted text For Computer Numerically Controlled (CNC) machines this European Standard does not cover hazards related to Electro-Magnetic Compatibility (EMC). This European Standard is primarily directed at machines which are manufactured after the date of issue of this European Standard. NOTE 3 Circular saw benches are dealt with in #prEN 1870-19:2011. NOTE 4 Machines covered by this document are listed under 1.1 of Annex IV of the Machinery Directive.

TS EN 1870-6+A1-2012木工机床安全. 圆盘锯床. 第6部分: 带手工上料和/或下料的木柴/圆锯架的木柴及两用圆锯机械用圆盘锯床

This document deals with all significant hazards, hazardous situations and events as listed in Clause 4 which are relevant to firewood and dual-purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading, hereinafter referred to as \"machines\", designed to cut solid wood. On Combined circular sawing machines for firewood - Log splitting machines only the circular sawing machine for firewood is covered by this European Standard. For the requirements for the log splitting part of this machine see EN 609-1:1999 and EN 609-2:1999. For Computer Numerically Controlled (CNC) machines this European Standard does not cover hazards related to Electro-Magnetic Compatibility (EMC). This European Standard does not apply to: log sawing machines where the saw unit moves to cut the workpiece; machines where the saw blade is capable of tilting; hand-held motor-operated electric tools or any adaptation permitting their use in a different mode, i.e. bench mounting; NOTE 1 Hand-held motor-operated electric tools and saw benches to form an integrated whole with a hand- held motor-operated electric tools are covered by EN 60745-1:2006 together with EN 60745-2-5:2007. machines driven by an internal combustion engine This European Standard is primarily directed at machines which are manufactured after the date of issue of this European Standard. NOTE 2 Machines covered by this European Standard are listed under A.1.1 and/or A.1.2 of annex IV of the Machinery Directive

TS EN 1870-10-2013木工机械安全. 圆盘锯床. 第10部分: 单刃自动和半自动上切横切锯床

-