滑轨总成检测

滑轨总成检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 6809.2-2013往复式内燃机 零部件和系统术语 第2部分:气门、凸轮轴传动和驱动机构

GB/T 6809的本部分规定了与往复式内燃机气门、凸轮轴传动和驱动机构有关的术语。GB/T 1883.1则提供了往复式内燃机的分类和规定了这种内燃机及其工作特性的基本术语。

GB 7258-2017机动车运行安全技术条件

本标准规定了机动车的整车及主要总成、安全防护装置等有关运行安全的基本技术要求，以及消防车、救护车、工程救险车和警车及残疾人专用汽车的附加要求。本标准适用于在我国道路上行驶的所有机动车，但不适用于有轨电车及并非为在道路上行驶和使用而设计和制造、主要用于封闭道路和场所作业施工的轮式专用机械车。

GB/T 33641.2-2017农林拖拉机和机械 安全带 第2部分:固定装置强度要求

GB/T 33641的本部分规定了驾驶员用约束髋部的座椅安全带总成的固定装置的术语和定义、强度要求。本部分适用于农林拖拉机和自走式机械。

GB 51062-2014煤矿设备安装工程施工规范

本规范适用于煤矿建设及生产系统设备安装工程的施工。

MT/T 1076-2008煤炭地质钻探规程

本标准规定了煤炭地质钻探工作野外作业工艺技术要求和安全生产要求。本标准适用于在中华人民共和国领域内的煤炭地质钻探工作设计、生产和安全评价、管理。标准不适用于使用煤炭地质钻探技术手段和方法从事其延伸业的设计、生产和安全评价、管理。

JTJ 280-2002港口设备安装工程技术规范

本规范适用于新建、改建和扩建港口设备安装工程的施工及验收。

JGJ 160-2016施工现场机械设备检查技术规范

本规范适用于新建、扩建和改建的工业与民用建筑及市政工程施工现场机械设备的检查。

DZ/T 0065-1993坑道钻机技术条件

本标准规定了坑道钻机(以下简称钻机)的技术特性、技术要求、试验方法和检验规则。\t本标准适用于DZ/T 0052-93((坑道钻机系列》规定的钻机。

QC/T 47-2013汽车座椅术语

本标准界定了汽车座椅术语及其定义。本标准适用于M<下标1>类(GB/T 15089-2001)车辆的座椅,也可推广使用于载货汽车、客车的座椅。

QC/T 291-1999汽车机械式分动器性能要求

本标准规定了汽车机械式分动器性能要求。　　本标准适用于越野汽车、特种用途专用汽车所使用的机械式齿轮分动器。

QC/T 805-2008乘用车座椅用滑轨技术条件

本标准规定了乘用车座椅用滑轨的技术要求，试验方法，检验规则及标志、包装、运输和储存要求。本标准适用于M<下标 1>类车辆的座椅用滑轨。M<下标 2>和M<下标 3>类车辆的座椅用滑轨可参照执行。

QC/T 831-2010乘用车座椅用电动滑轨技术条件

本标准规定了乘用车座椅用电动滑轨的技术要求、试验方法、检验规则和标志、包装、运输、储存。本标准适用于M<下标1>类车辆的座椅用电动滑轨，M<下标2>和M<下标3>类车辆的座椅用电动滑轨可参照执行。

JB/T 11783.2-2014往复式内燃机 附件传动系统  第2部分:试验方法

JB/T 11783的本部分规定了带、带轮和张紧器的试验方法和检验规则。本部分适用于往复式内燃机的附件传动系统。对其他行业用传动系统的带、带轮和张紧器，只要制造厂和客户商定，也可对本部分作适当修改后使用。

EN ISO 13628-1-2005石油和天然气工业.水下采油系统的设计和操作.第1部分:一般要求和建议 ISO 13628-1-2005

This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment.This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbons from one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floating or subsea) or onshore, or to inject water/gas through subsea wells.This part of ISO 13628 and its related subsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are not specifically discussed because of their limited use. However, the information presented is applicable to those types of equipment.If requirements as stated inThis part of ISO 13628 are in conflict with, or are inconsistent with, requirements as stated in the relevant complementary parts of ISO 13628, then the specific requirements in the complementary parts take precedence.

NF E51-230-1-2008石油、石化和天然气工业.旋转型容积式压缩机.第1部分:推移式压缩机

La présente partie de l'ISO 10440 spécifie les exigences relatives aux compresseurs rotatifs hélicoïdaux à lobes droits, à sec et plongés dans l'huile (voir Figure 1), utilisés dans les services d'industries du pétrole, de la pétrochimie et du gaz naturel pour créer des surpressions ou des dépressions ou les deux à la fois. Elle concerne les compresseurs à service spécial.Elle ne s'applique pas aux compresseurs à air standard, aux compresseurs à anneau liquide et aux compresseurs à palettes.

DIN 19704-1-2014钢制液压结构件.第1部分:设计和计算准则

This standard is to be used for the calculation and construction of hydraulic steel structures consisting of steel constructions, mechanical engineering components and the electric equipment. These structures cover movable sealing devices (\"locks\") including sealings and mountings, the drives and the connecting components between the lock body and the driving devices. This standard is applicable to hydraulic steel structures which are to be built from scratch. If this standard is intended to be applied for purposes of reconstruction, repair or addition of components to existing older steel structures, it shall be distinguished by declaration to which components this standard applies. This standard also applies to inspection covers and components such as intake rakes, bollards, fenders and channel bridges. It may be applied analogously to penstocks including valves and controls. This standard is not applicable to dolphins, training works, shore enclosures, landing piers and offshore structures (e. g. offshore platforms, jack-up platforms). For small and less loaded structures, were the product of multiplying water pressure (in kN/m2) and dam area (in m2) under water weight is less than 50 (in kN), the user may deviate from the requirements of this standard provided there is no objection by the building owner. Requirements for hydraulic steel engineering according to this standard include steel constructions which are under strain of stagnant or flowing waters. They cover movable sealing devices and parts securely connected with the massive type of construction, such as track supports and bearing area. Steel structures build in conjunction with hydraulic steel structures, but which are not exposed to water pressure are to be designed and calculated according to the applicable construction regulations. Requirements for mechanical engineering according to this standard are applicable to machine structures responsible for the movement and the bearings of lock devices, e.

BS 4422-2005火灾.词汇

This standard defines terms specific to, and in general use by, fire protection agencies.Fire safety engineering and fire testing terms are covered in BS EN ISO 13943.This standard does not include terms where the standard dictionary definition is applicable. Neither does it include terms and definitions which are unique to any small specialized discipline within fire safety.

BS EN 60204-33-2011机械安全.机械的电气设备.半导体制造设备要求

This part of IEC 60204 applies to electrical and electronic equipment associated withsemiconductor fabrication equipment for the manufacture, measurement, assembly, and test ofsemiconductors.NOTE 1 In this standard, the term electrical includes electrical, electronic, and programmable electronic matters(i.e. electrical equipment means electrical, electronic, and programmable electronic equipment).NOTE 2 In the context of this standard, the term person refers to any individual and includes those persons whoare assigned and instructed by the user or his agent(s) in the installation, use, and care of the fabricationequipment in question.The electrical equipment covered by this standard commences at the point of connection of thesupply to the electrical equipment (see 5.1), and includes proper instruction for its safeinstallation.NOTE 3 For the requirements for the electrical supply installation in buildings, see IEC 60364 series.This part is applicable to the electrical equipment or parts of the electrical equipment thatoperate with nominal supply voltages not exceeding 1 000 V for alternating current (a.c.) andnot exceeding 1 500 V for direct current (d.c.), and with nominal supply frequencies notexceeding 200 Hz. For higher voltages or frequencies, special requirements may be needed.NOTE 4 Electrical equipment within which derived voltages exceed these supply voltage limits is within the scopeof this standard.Included are requirements for protective measures against electrical safety hazards as well aselectrical interlock circuits that protect against non-electrical hazards. However, it does notcover all the requirements that are needed or required by other standards or regulations inorder to safeguard persons from hazards other than electrical hazards (e.g. chemical hazards,mechanical hazards, radiation hazards). Each type of machine has unique requirements to beaccommodated to provide adequate safety.Additional and special requirements can apply to the electrical equipment of fabricationequipment that:• use, process, or produce potentially explosive material;• are used in potentially explosive and/or flammable atmospheres;• have special risks when producing or using certain materials;• are hoisting machines (which are covered by IEC 60204-32).This standard does not include specifications for performance or functional characteristics ofthe fabrication equipment.This standard does not deal with the possible effects on human health that can result fromemissions (for example EMFs, noise) from the fabrication equipment.This standard does not specify requirements for electromagnetic compatibility (EMC).