中密度纤维板生产线检测

GB/T 18002-2011中密度纤维板生产线验收通则

本标准规定了中密度纤维板生产线验收的一般要求、设备基础、主要设备安装、辅助设备及电气安装、设备附属管道安装、安全、卫生要求、节能、环保要求，单机空运转试验、生产线空运转试验、生产线负荷试验等要求，检验与验收规则以及标志等。本标准适用于干法中密度纤维板生产线（以下简称生产线）。

GB 50822-2012中密度纤维板工程设计规范

本规范适用于生产能力不小于100m<上标3>/d,以木质材料作为主要原料,采用干法工艺生产中密度纤维板的新建、改建和扩建工程的设计。

GB 50879-2013人造板生产热能中心工程设计规范

本规范适用于符合下列条件的热能中心工程设计:1 以人造板生产过程中产生的树皮、锯屑、砂光粉等木质废料为主要燃料;2 采用层燃、室燃或组合的燃烧方式;3 可同时产生蒸汽、有机热载体、热烟气等多种热载体。

GB/T 50887-2013人造板工程环境保护设计规范

本规范适用于密度纤维板、刨花板和胶合板工程环境保护设计。

GB 50890-2013饰面人造板工程设计规范

本规范适用于以人造板为基材，以浸渍胶膜纸、装饰单板及预油漆纸等为饰面材料进行表面装饰加工的新建、扩建和改建工程设计。

LY/T 1680-2006木材综合利用规范

本标准规定了森林采伐、原木贮存保管、制材、木材干燥、木材保护、人造板、木地板、木材制浆、木材剩余物利用等产品生产与加工的原则及技术措施，规定了废弃木材回收利用的原则。 本标准适用于木材生产、加工和利用的设计部门、生产部门和项目审批部门。

LY/T 2719-2016人造板制造企业清洁生产审核指南

本标准规定了人造板制造企业清洁生产审核的术语和定义、审核程序、各程序的目的、要求和工作内容等。本标准适用于人造板制造企业清洁生产的审核工作及审核报告的编写。

HJ/T 314-2006清洁生产标准.电镀行业

本标准规定了电镀行业的清洁生产指标。 本标准适用于电镀行业企业生产线（综合电镀生产和印制电路板生产的主要工艺及主要镀种）清洁生产审核和清洁生产潜力与机会的判断，以及清洁生产绩效评定和清洁生产绩效公告制度。

RB/T 109-2013能源管理体系 人造板及木制品企业认证要求

本标准规定了人造板及木制品企业对能源管理体系的认证要求,规定了对人造板及木制品企业能源使用和消耗实施系统管理的基本要求,确定了影响人造板及木制品企业能源绩效的因素,明确了人造板及木制品企业能源管理体系的核心要素要求。本标准适用于人造板及木制品企业的能源管理体系认证,可用于人造板及木制品企业建立、实施、保持和改进其能源管理体系,也作为各相关方考核人造板及木制品企业能源管理体系的依据。

JB/T 3750-1984产品类种划分

本标准适用于机械工业部所生产的产品。作为计划、统计管理工作的产品类中划分的统一依据。 本标准不包括大型成套设备。

DIN EN 12779-2016木材加工机械安全性.带固定装置的碎片和灰尘排出系统.安全要求.德文版本EN 12779-2015

This European standard sets out the safety related performance requirements and describes the methods for elimination of hazards or the measure that shall be taken to minimise hazards which cannot be eliminated on Chips- and dust extraction systems (CADES), connected to woodworking machines designed to process solid wood, chipboard, fibreboard, plywood and also these materials where these are covered with plastic laminate or edgings.

DIN EN 13964-2014吊顶.要求和试验方法;德文版本EN 13964-2014

This European Standard covers membranes, individual substructure components, substructure kits and suspended ceiling kits when these are placed on the market. This European Standard also gives certain specifications for the installed suspended ceiling system, for two reasons: the individual components and kits may have to meet certain requirements in order for the installed system to be able to meet the requirement when the system is installed, and because it is appropriate, for ease of reference, to give both component/kit requirement and installed system requirement in the same document, given the relationship between them.This European Standard provides information for the various parties responsible for designing, manufacturing and specifying/selecting suspended ceilings used for interior applications in general building and civil engineering structures. It covers suspended ceilings sold as a complete kit, substructures sold as kits, individual components (products) of such substructures, and membrane components. It includes test methodsand methods of assessment, as well as provisions for the evaluation of conformity of the products to the requirements of this European Standard.In the absence of any other European Standard, this European Standard specifies dimensions, tolerances and, where relevant, performance requirements, for commonly available ceiling substructures and membrane components.This European Standards covers the following essential characteristics: reaction to fire; fire resistance (suspended ceiling kits only); release of dangerous substances: release of asbestos (content) (suspended ceiling kits and membrane components only); release of formaldehyde (suspended ceiling kits and membrane components only); other dangerous substances shatter properties (safe breakage) / impact resistance (for suspended ceiling kits and membrane components of brittle materials in suspended ceiling kits only); flexural tensile strength; load bearing capacity,

DIN EN 13986-2015建筑用木质板条.特性、合格评定和标记;德文版本EN 13986-2004+A1-2015

This European Standard defines wood-based panels for use in construction and specifies relevant characteristics and appropriate test methods to determine those characteristics for wood-based panels, whether unfaced, overlaid, veneered or coated.

BS EN 13748-2-2004水磨石砖.外部使用的水磨石砖

This European Standard specifies materials, properties and methods of testing for unreinforced cement-bound terrazzo tiles which are factory made and sold ready to be placed.\nThe tiles are intended for external use (including roofing applications) in pedestrian areas, e.g. walkways, terraces, commercial centres and swimming-pools, etc, where the decorative aspect of the covering is predominant.\nNOTE This standard applies to ex-factory products and does not take into account the laying of the product.

ANSI/OPEI B175.1-2012户外动力设备.内燃机驱动手持式链锯.安全性和环境要求

To establish safety and environmental requirements for internal combustion engine-powered chain saws and replacement saw chains for use primarily in cutting wood.