安全性衣服的高可见度材料检测

GB/T 15732-1995汉字键盘输入用通用词语集

本标准规定了汉字键盘输入用通用词语。 本标准适用于汉字键盘输入、方案优化和评测。中文信息处理的其他领域也可参照执行。

HB 6784-1993飞机内部和外部照明

本规范规定了飞机内部和外部照明的总体布局、性能、检验方式和检验要求。\n　　本规范适用于各种军、民用飞机、也适用于直升机。

CCAR-23-R3-2004正常类、实用类、特技类和通勤类飞机适航规定

（a）本部规定颁和更改正常类、实用类、物质类和通勤类飞机型号合格证的适航标准。（b）按照中国民用航空规章第21部的规定申请正常类、实用类、物质类和通勤类飞机型号合格证或申请对核合格证进行更改的法人，必须表明符合本部中适用的要求。

EN 15333-1-2008呼吸装置.压缩气体驱动装置用开路脐带式电缆.第1部分:需氧量供应装置

This European Standard specifies minimum requirements for demand surface supplied and demand surface oriented diving apparatus to ensure a minimum level of safe operation of the apparatus. It applies to the following: depths between 0 m and 50 m for apparatus using air, oxygen or oxygen in nitrogen mixtures; depths between 0 m and 60 m for apparatus using oxygen, oxygen and helium or oxygen, nitrogen and helium gas mixtures; water temperatures between 4 ℃ and 34 ℃ or outside these temperatures as specified by the manufacturer. The requirements of this European Standard are intended to take account of the interaction between the wearer, the apparatus, and where possible the environment in which the apparatus is likely to be used.This European Standard does not cover saturation diving systems, mini bell systems or apparatus used for oxygen decompression only.

DIN CEN/TR 614-3-2011机械安全性.第3部分:移动机械的设计用人类工效学原则.德文版本 CEN/TR 614-3-2010

This Technical Report establishes the ergonomic principles to be followed during the design process of mobile machinery with special emphasis on the aspects in which mobile machinery differs from static machinery. The ergonomic design principles given in this Technical Report apply to either or both seated and standing positions. This Technical Report is applicable for the design of mobile (self-propelled and towable) machines in order to ensure the ergonomic requirements for the operator. This Technical Report applies only to driving and operating mobile machinery and not to performing other tasks (e. g. sorters on a potato harvesting machine). Pedestrian controlled and handheld machinery are not included. This Technical Report also applies to vehicle-mounted machinery when observing their functional properties e. g. mobile cranes. Installing, cleaning, and repairing of mobile machinery is not included. Basic concepts and general ergonomic principles for the design of machinery are dealt with in prEN ISO 12100 and EN 614-1 and EN 614-2.

DIN CEN/TR 16149-2011起草CEN/TC 158标准的指导文件;德文版本CEN/TR 16149-2011

This document has been produced by the convenors of CEN/TC158 working groups. It is intended to serve as a guide, to be consulted when drafting new EN standards for head protection and when revising or amending existing ones. Whilst implementation of its contents is not mandatory, working groups are urged not to make deviations from this guidance document without good cause. This is a living document - omissions will be covered in later issues. In this document, reference is made to CEN/TR 16148, Head and neck impact, burn and noise injury criteria - A Guide for CEN helmet standards committees. This gives further guidance about the areas of the head which helmet standards should aim to protect, and about head and neck injuries. The working group should assess the foreseeable risks against which the helmet should provide protection. Each of the helmet standards should provide for a helmet, which will offer optimum protection to the head against these foreseeable risks and should satisfy the Basic Health and Safety Requirements of EU Directive 89/686/EEC to the extent indicated in Annex ZA of the helmet standard. Helmet standards should indicate, in an informative annex, how the level of performance requirements specified relates to the severity of injury to be tolerated. Working groups should refer to CEN/TR 16148 when drafting this annex. Reference is also made to EN 13087 (all parts), Protective helmets - Test methods. This standard provides harmonized methods of test for many of the topics listed below. The various parts of EN 13087 are listed in the Bibliography.

DIN EN ISO 12100-2011机械安全性.设计一般原则.风险评估和风险降低(ISO 12100-2010).德文版本EN ISO 12100-2010

This International Standard defines the basic terminology and specifies the methodology and principles for risk assessment and risk reduction to help designers in achieving safety in the design of machinery.

BS 6465-4-2010卫生器具.公共厕所业务守则条款

This part of BS 6465 gives recommendations on the location, numbers,siting, design and management of public toilets. It is applicable to theprovision of new facilities and to the retention and refurbishment ofexisting facilities.This standard is applicable to the following types of public toilet facilities:a) municipal public on-street toilets;b) off-street publicly available toilets (e.g. in shopping malls);c) automatic public conveniences (APCs);d) street urinals;e) facilities for disabled people, from the point of view of scale ofprovision and location;f) baby changing and ancillary toilet facilities.

BS 7121-4-2010起重机安全使用实施规程.卡车式装载机

This part of BS 7121 gives recommendations for the safe use of lorryloaders. Subjects covered include management, selection of equipment,selection and training of personnel, procedures and precautions,testing, inspection, maintenance and examination.This part of BS 7121 is intended to be used in conjunction withBS 7121-2, which provides general guidance on the inspection, testingand examination of all types of cranes.

BS EN 14175-2-2003通风橱.安全性和性能要求

This part 2 of EN 14175 specifies safety and performance requirements and objectives for general purpose fume cupboards. In addition, dimensions and marking of general purpose fume cupboards are specified as well as requirements on the product manual to be supplied with fume cupboards.\nRecommendations on the evaluation of conformity of general purpose fume cupboards with the requirements of this part 2 of EN 14175 are given in the informative annex A.\nFor terms and definitions of fume cupboards EN 14175-1 applies. For type testing of fume cupboards prEN 14175-3 applies. For microbiological safety cabinets EN 12469 applies.\nThis part of EN 14175 does not address recirculatory filtration fume cupboards or fume cupboards for carrying out work on radioactive materials. For special purpose fume cupboards other requirements may apply.

BS EN 15333-1-2008呼吸设备.配备的开路脐带式压缩气体驱动装置.生物需氧量便携式供氧装置

This European Standard specifies minimum requirements for demand surface supplied and demand surfaceoriented diving apparatus to ensure a minimum level of safe operation of the apparatus. It applies to thefollowing: depths between 0 m and 50 m for apparatus using air, oxygen or oxygen in nitrogen mixtures; depths between 0 m and 60 m for apparatus using oxygen, oxygen and helium or oxygen, nitrogen andhelium gas mixtures; water temperatures between 4 °C and 34 °C or outside these temperatures as specified by themanufacturer.The requirements of this European Standard are intended to take account of the interaction between thewearer, the apparatus, and where possible the environment in which the apparatus is likely to be used.This European Standard does not cover saturation diving systems, mini bell systems or apparatus used foroxygen decompression only.

BS EN 15333-2-2009呼吸设备 配备的开路脐带式压缩气体驱动装置 自由流动装置

This European Standard specifies minimum requirements for free flow surface supplied and free flow surfaceoriented diving apparatus to ensure a minimum level of safe operation of the apparatus. It applies to thefollowing:-a maximum depth of 50 m for apparatus using:a) air or;b) oxygen or;c) oxygen in nitrogen mixtures (Nitrox) or;d) oxygen in helium mixtures (Heliox) or;e) oxygen, nitrogen and helium mixtures (Trimix);-water temperatures between 4 °C and 34 °C or outside these temperatures as specified by themanufacturer;-environmental temperatures between -20 °C and 50 °C or outside these temperatures as specified by themanufacturer.The requirements of this European Standard are intended to take account of the interaction between thewearer, the apparatus, and where possible the environment in which the apparatus is likely to be used.This European Standard does not cover saturation diving systems, mini bell systems or apparatus used foroxygen decompression only.

ANSI B71.3-2005室外动力设备.扫雪机.安全规范

The safety specifications in this standard apply to (a) walk-behind power snow throwers, (b) ride-on power snow throwers, (c) lawn ride-on tractors with snow thrower attachments, (d) lawn and garden tractors with snow thrower attachments, and (e) lever-s