电饭煲 电压力煲检测

电饭煲 电压力煲检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 32928-2016电子商务交易产品信息描述 家用电器

本标准规定了电子商务交易中家用电器类产品信息的描述属性与方法、模型、摘要描述以及扩展方法。本标准适用于电子商务中家用电器类产品信息的发布、交换、存储和管理等。

GB/T 35722.2-2017家用和类似用途智能电自动控制器系统 电磁炉用智能电自动控制器系统的特殊要求

GB/T 35722的本部分规定了各类家用和类似用途电磁炉，包括所有IH加热电器之间及其关联系统间的分类、系统架构、入网、标识、接口、安全及通用设备模型。本部分适用于单相器具额定电压不超过250 V，其他器具额定电压不超过480 V的各类家用和类似用途电磁炉及采用IH加热技术作为加热源的加热产品内的智能控制器系统。

QB/T 4687-2014电磁灶可靠性评价方法

本标准规定了家用和类似用途电磁灶(以下简称“电磁灶”)可靠性定量评价的常用参数及其评价方法。本标准适用于家用和类似用途电磁灶,包括气、电组合型家用和类似用途器具的电磁加热部分。本标准不适用于工频电磁灶、商用电磁灶。本标准也不适用于使用电磁加热方式但不含电磁灶头的器具,如电磁加热电饭煲、电磁加热饮水机等。

QB/T 5129-2017电磁加热电饭赁技术要求及试验方法

本标准规定了电磁加热电饭煲(锅)的术语和定义、分类和型号命名、要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于额定电压不超过250 V的家用和类似用途的电磁加热电饭煲(锅)。

YC/T 384.2-2018烟草企业安全生产标准化规范 第2部分:安全技术和现场规范

YC/T 284的本部分规定了烟草企业安全生产标准化的安全技术和现场规范要求，包括设备设施、作业活动、作业环境和现场运行的安全要求。本部分适用于省级烟草公司(局)、省级工业公司等省级公司、烟草加工和烟草商业生产经营单位。其中，烟草商业生产经营单位特指地市级烟草公司，烟草加工单位含烟叶复烤、卷烟制造、雪茄烟制造、再造烟叶生产的单位。烟草配套和多元化投资的其他生产经营单位，如醋酸纤维、烟草印刷等单位可参照执行。

RB/T 108-2013能源管理体系 家电企业认证要求

本标准规定了对家电企业能源管理体系的认证要求和对家电企业能源使用和消耗实施系统管理的基本要求。本标准适用于家电企业的能源管理体系认证,可用于家电企业建立、实施、保持和改进其能源管理体系,也可作为各相关方考核评价家电企业能源管理体系的依据。

DIN 68930-2009健康目的的厨房用具.要求及试验

This standard applies to furniture intended for use in domestic kitchen, housework rooms or the like. Kitchen seating as well as detached tables are not within the scope of this standard.

DIN 85005 Bb.1-2005船舶和海上技术.技术文献的图形符号.索引

This first supplement of the DIN 85005 contains all the standards according to series DIN 85005 approved of series VG 85005 in all their sections. It will increase the transparency to these standards. And helpts make them more understandable to future users. This supplement also has an attached index with all the subsequent specified standards to ease the us age.

DIN ISO 7000-2008设备用图形符号.索引和一览表

This International Standard provides a synopsis of those graphical symbols which are placed on equipment orparts of equipment of any kind in order to instruct the person(s) using the equipment as to its operation.

BS EN 30-1-3-2003家用燃气灶具.安全.具有玻璃陶瓷热板的器具

This standard specifies the construction and performance characteristics as well as the requirements and methods of test for the safety and marking of domestic cooking appliances, capable of using the combustible gases defined in EN 30-1-1:1998 and EN 30-1-1:1998/A1:1999, having one or more enclosed covered burners under a glass ceramic panel, referred to in the text as \"appliances\".\nThis standard is intended to be used in conjunction with EN 30-1-1:1998 and EN 30-1-1:1998/A1:1999 or EN 30-1-4:2002, and, where appropriate, EN 30-2-1:1999.\nIt does not cover all of the safety requirements and methods of test that are specific to forced convection ovens and/or grills.\nUnless excluded specifically hereafter, this standard covers appliances or their components, whether or not the component parts are independent or incorporated into a single appliance, even if the other heating components of the appliance use electrical energy (e.g. gas-electric-cookers).\nThis standard includes requirements covering the electrical safety of equipment incorporated in the appliance that is associated with gas. It does not include requirements covering the electrical safety of electrically-heated component parts of their associated equipment.\nThis Standard does not apply to:\n—outdoor appliances;\n—appliances connected to a combustion products evacuation duct;\n—appliances having a pyrolytic gas oven;\n—appliances having automatic burner control systems that\n have a second safety time, or\n control one or more burners that incorporate a separate ignition burner;\n—appliances having an uncovered burner or a non-enclosed covered burner;\n—appliances equipped with air-gas ratio controls;\n—appliances with more than one fan for the supply of combustion air and/or for the evacuation of products of combustion from a combustion chamber;\n—appliances supplied at pressures greater than those defined in 7.1.2.\nThis standard does not cover the requirements relating to third family gas cylinders, their regulators and their connection.\nThis standard only covers type testing.\nnote:1) Refer to the electrical safety rules.

BS EN 1775-2007燃气供应.建筑物用燃气管道.大工作压力不超过或等于5 bar.功能性推荐规范

1.1 This standard specifies general recommendations for the design, construction, testing, commissioning,operation and maintenance of installation pipework; pipework between the delivery point of the gas and the inletconnection to the gas appliance.This standard specifies common basic principles for gas installation pipework.Users of this European standard need to be aware that more detailed national standards and/or codes of practicemay exist in the CEN member countries.This standard is intended to be applied in association with these national standards and/or codes of practice settingout the above mentioned basic principles.In the event of conflicts in terms of more restrictive requirements in national legislation/regulation with therequirements of this standard, national legislation/regulation takes precedence as illustrated in CEN /TR 13737.NOTE 1 CEN/TR 13737 contains:- clarification of relevant legislation/regulations applicable in a country;- if appropriate, more restrictive national requirements;- national contact point for the latest information.This standard applies to:- gas installations in residential, commercial and public access building having a maximum operating pressure(MOP) less than or equal to 5 bar;- industrial gas installations having a maximum operating pressure (MOP) less than or equal to 0,5 bar.NOTE 2 For industrial gas installations having a MOP above 0,5 bar, or installations having a MOP above 5 bar, see prEN15001-1.This standard is applicable to new installation pipework as well as to replacements of, or extensions to, existinginstallation pipework.This standard does not contain detailed recommendations relating to the laying of buried pipework.NOTE 3 For more information on buried pipework, see EN 12007-1, EN 12007-2 and EN 12007-3.NOTE 4 For more information on gas pressure regulating installations, see EN 12279.NOTE 5 For more information on gas metering systems, see EN 1776.1.2 This standard is applicable to installation pipework supplied from gas distribution systems and from liquefiedpetroleum gases (LPG) storage vessels.Excluded are:- single appliance LPG installations without fixed pipework, achieved by a flexible appliance connector from anadjacent LPG storage cylinder.- LPG storage vessels.1.3 In this standard the term 'gas' refers to combustible gases, which are gaseous at 15 °C and 1 013,25 mbar.These gases, odorized for safety reasons, are commonly referred to as manufactured gas, natural gas or liquefiedpetroleum gases (LPG). They are also referred to as first, second or third family gases (see EN 437).In this standard, all pressures are gauge pressures, unless otherwise stated.