成分分析 · 材料检测 · 食品检测 · 环境检测

专业检测知识科普,帮您选对检测方案

咨询工程师

电气连接器及电缆组件检测

发布时间:2024-06-21 作者:中析研究所 浏览:

GB/T 20716.1-2006道路车辆 牵引车和挂车之间的电连接器 第1部分:24V标称电压车辆的制动系统和行走系的连接

本部分规定了标称电压为24V的牵引车和挂车之间制动系统和行走系的电连接器的尺寸特性、接点分布、试验和要求。还规定了当连接器断开时用于接受和储存插头的存放插座。

GB/T 20716.2-2006道路车辆牵引车和挂车之间的电连接器 第2部分:12V 标称电压车辆的制动系统和行走系的连接

本部分规定了标称电压为12V的牵引车和挂车之间制动系统和行走系的电连接器的尺寸特性、接点分布、试验和要求。还规定了当连接器断开时用于接受和储存插头的存放插座。

GB/T 20717-2006道路车辆 牵引车和挂车之间的电连接器 24V15芯型

本标准规定了15芯电连接器的尺寸、接点分布、试验及要求,该连接器用于标称电压为24V的牵引车及其挂车之间除制动系统和行驶系外的其他设备的电气连接,还进一步规定了当连接器断开时用于接收和存储插头的存放插座以及7芯和15芯连接器之间的转换装置。

GB/T 25088-2010道路车辆 牵引车和挂车之间的电连接器 24V7芯辅助型(24S)

本标准规定了标称电压为24V的牵引车和挂车之间7芯24V型电连接器的尺寸、特性要求、接点分布等。24S连接器在准备用于超过7芯要求情况下和GB/T 5053.1的24N连接器一起使用。本标准适用于牵引车和挂车之间7芯24V型电连接器。

HB/Z 401-2013民用飞机综合模块化航空电子系统封装与接口的环境设计指南

本指导性技术文件为民用飞机综合模块化航空电子系统封装与接口的环境适应性设计提供了指南。主要内容包括耐振动和冲击设计、热设计、内部安全性/防爆设计、电磁兼容性设计、光纤接口技术和防静电控制等的通用原则和准则。本指导性技术文件适用民用飞机综合模块化航空电子系统封装与接口(包括光、机、电接口)的环境适应性设计。

SJ 21429-2018军用电子装备柔性线缆数字化设计要求

本标准规定了军用电子装备柔性线缆数字化设计的一般要求与详细要求,包括布线数据的使用与管理要求。本标准适用于军用电子装备的柔性线缆三维数字化设计与应用。

UL 1740-2007机器人和自动设备

These requirements cover robots and robotic equipment rated 600 V or less and intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70. Since end-use installation of a robot and robotic equipment may vary for each user application, guidelines for end-product installation may be evaluated to the applicable sections of ANSI/RIA R15.06, Standard for Industrial Robots and Robot Systems-Safety Requirements. Portions of the requirements in this Standard have been excerpted from the Robotic Industries Associations (RIA) Standard for Industrial Robots and Robot Systems - Safety Requirements, ANSI/RIA R15.06. These requirements cover robotic equipment and systems intended for indoor and outdoor use in applications such as parts assembly, parts transfer, automated material handling, inspection, loading, diecasting, deburring, welding, paint spraying, clinical/diagnostic systems, pharmaceutical applications, commercial food processing, automated vehicle refueling systems, library book handling/sorting, clean room applications, medical use for surgery, mobile robots, automated guided vehicles, automated storage/retrieval systems, and the like. Unique features or functions associated with the robotic application, not specifically addressed in this Standard, shall also be evaluated to other applicable Standards/requirements. These may include, but are not limited to, Electrical Equipment for Laboratory Use; Part 1: General Requirements, UL 3101-1; Medical and Dental Equipment, UL 544; Power Operated Pumps for Petroleum Product Dispensing Systems, UL 79. In addition to the requirements in this Standard, robots and robotic systems shall also comply with the applicable sections of the Electrical Standard for Industrial Machinery, ANSI/NFPA 79. Robots and robotic systems intended for use in hazardous locations, as defined by the National Electrical Code ANSI/NFPA 70, shall also comply with the requirements in Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations, UL 913. In the following text, a requirement that applies to one type of equipment, such as a controller or teach pendant, will be identified by a specific reference. In the absence of a specific reference or if the term robot or robotic equipment is employed, it is to be understood that the requirement applies to all types of equipment covered by this Standard.

DIN EN 3155-012-2007航空航天系列.用于连接部件的电触点.第012部分:R级、焊接、D型、凸形、尺寸8、三轴电触点.产品标准

This standard specifies the required characteristics and tests applicable to size 8, male triaxial electrical contacts 012, type D, solder, class R, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated female contacts are defined in EN 3155-011 and EN 3155-013.

DIN EN 3197-2011航空航天系列.飞行器电子和光学互连系统;德文版本和英文版本EN 3197-2010

The document provides instructions on the methods to be used when installing, repairing or modifying aircraft electrical and optical fibre interconnection systems, subject to the limitations defined in 4 of this document.

DIN EN 4701-001-2015航空航天系列.EN 4531标准触点用125℃工作温度下模块矩形光学连接器.第001部分:技术规范.德文和英文版本EN 4701-001-2014

This European Standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for EN 4165 rectangular connectors with removable optical modules using EN 4531-101 contacts.

DIN EN 4830-001-2016航空航天系列.EN 4639-10X接触用工作温度为125 ℃的矩形模块化光连接器.第001部分:技术规格.德文和英文版本EN 4830-001-2015

This European Standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for EN 4165 rectangular connectors with removable optical modules using EN 4639-10X contacts.

DIN EN ISO 13628-6-2008石油和天然气工业.海底生产系统设计和操作.第6部分:海底生产控制系统(ISO 13628-6:2006)

This standard is applicable to design, fabrication, testing, installation and operation of subsea production control systems in the oil and natural gas exploration. It contains requirements to subsea production control systems.This part of ISO 13628 covers surface control system equipment, subsea-installed control system equipemnt and control fluids. This equipment is utilized for control of subsea production of oil and gas and for subsea water and gas injection services. Where applicable, this part of ISO 13628 can be used for equipment on multiple-well applications.This part of ISO 13628setablishes design standards for systems, subsystems, components and operating fluids in order to provide for the safe and functional control of subsea production equipment.This part of ISO 13628contains various types of information related to subsea production control systems. They are-informative data that provide an overview of the architecture and general functionality of control systems for the purpose of introduction and information ;-basic prescriptive data that shall be adhered to by all types of control system;-selective prescriptive data that are control-system-type sensitive and shall be adhered to only when they are relevant;-optional data or requirements that need be adopted only when considered necessary either by the purchaser or the vendor.In view of the diverse nature of the data provided, control system purchasers and specifiers are advised to select from this part of ISO 13628 only the provisions needed for the application at hand. Failure to adopt a selsctive approach to the provisions contained herein can lead to overspecification and higher purchase costs. Rework and repair of used equipment are beyond the scope of this part of ISO 13628.

BS EN 3372-001-2007航空航天系列.工作温度在-65℃~175℃或连续工作温度为200℃、带卡口连接的、防碰擦、中和高接触密度、圆形电连接器.技术规范

This standard specifies the general characteristics, the conditions for qualification, acceptance and qualityassurance, as well as the test programs and groups. These bayonet coupling, scoop-proof, medium and highdensity connectors are suitable for operating temperatures − 65 °C to 175 °C continuous or 200 °C continuousaccording to class and model.

BS EN 60512-25-2-2002电子设备连接器.试验和测量.试验25b.衰减(介入损耗).第2节:衰减(介入损耗)

This part of IEC 60512 is applicable to electrical connectors, sockets, cable assemblies orinterconnection systems.This standard describes a frequency and a time domain method to measure attenuation/insertion loss as a function of frequency.

BS EN 60512-25-5-2004电子设备用连接器.试验和测量.试验25e.回程损耗

This part of IEC 60512 is applicable to electrical connectors, sockets, cable assemblies or interconnection systems.\nThis part of IEC 60512 describes a frequency and a time domain method to measure return loss as a function of frequency.

BS EN 60512-25-6-2004电子设备用连接器.试验和测量.试验25f:眼图和图像跳动

This part of IEC 60512 is applicable to electrical connectors, cable assemblies, or interconnection systems within the scope of IEC TC 48.\nThis standard describes methods for measuring an eye pattern response and jitter in the time domain.

上一篇核电厂安全相关压力/温度/转速传感器检测 下一篇限位开关检测

相关阅读

了解更多检测知识

道桥材料检测

道桥材料检测覆盖水泥、沥青、集料、钢筋及结构混凝土等对象,通过取样规范、力学试验、化学分析与无损检测等手段,测定强度、变形、耐久等关键指标。本文按样品制备、检测方法、指标测定到判定标准的步骤展开,说明各环节操作要点,并给出第三方检测机构的选择要素,可用于工程质量控制与验收参考。

2026-11-13 | [其他]

洗衣凝珠检测

洗衣凝珠检测围绕成分、性能与安全三大维度展开,涵盖取样规范、HPLC法测定活性物含量、表面活性剂鉴定与酶活分光光度法测定、去污力与溶解性能试验、微生物限量与重金属指标判定。本文按流程分述各检测方法与操作要点,供质量控制与委托检测参考。

2026-11-09 | [其他]

绿色食品检测

绿色食品检测覆盖农药残留、重金属、微生物限量及理化品质等维度。本文按样品制备、GC-MS农残测定、ICP-MS重金属测定、平板计数法微生物检验的顺序说明操作要点,并阐述灵敏度、回收率等方法验证指标与判定标准,适合标志申报与质量控制场景参考。

2026-11-07 | [其他]

吐鲁番葡萄检测

吐鲁番葡萄检测围绕样品采集制备、农药残留GC-MS与HPLC分析、糖度及营养成分分光光度测定、重金属与微生物联检等环节展开。检测依据食品安全国家标准中的限量要求判定,报告可用于收购分级、市场准入及地理标志产品核查,检测流程规范、结果可追溯。

2026-10-31 | [其他]

食品过敏原检测

食品过敏原检测覆盖样本制备、ELISA蛋白筛查、PCR基因成分鉴定及LC-MS/MS质谱确证等环节。检测针对乳、蛋、花生、坚果、麸质等常见致敏成分,以检出限、特异性、回收率等指标评价方法性能,判定结果用于交叉污染控制、标签标示与进出口合规管理。

2026-10-29 | [其他]

二硫化钼检测

二硫化钼检测围绕物相结构、微观形貌、粒度分布与化学纯度展开,常用X射线衍射鉴别2H与1T晶型及杂相,拉曼光谱判断层数与缺陷状态,扫描电镜观察颗粒形貌,激光粒度法测定粒径分布,ICP光谱定量杂质元素。本文按制样、表征、指标判定的流程介绍各方法操作要点与适用场景。

2026-10-29 | [其他]

我们的优势

选择中析研究所的八大理由

资质齐全

旗下实验室依法依规开展检测,报告科学公正,获监管与客户广泛认可。

设备先进

上千台精密仪器定期检定校准,量值溯源体系完善。

专家团队

多领域技术专家,十年以上经验,破解各类疑难检测。

标准覆盖广

覆盖GB、行标及ISO、ASTM等国际标准,可定制方案。

周期短

常规项目7-10个工作日出报告,流程标准高效。

加急服务

支持加急检测通道,助力客户快速完成质量把关。

一对一服务

工程师全程对接,需求沟通到报告解读全流程陪伴。

数据保密

严格保密制度,客户样品与检测数据安全无忧。

旗下实验室资质

我司旗下实验室具备CMA资质认定及CNAS认可,具体项目是否在资质认定/实验室认可范围内请与工程师确认。

CMA检验检测机构资质认定证书

CMA检验检测机构资质认定证书

CNAS实验室认可证书

CNAS实验室认可证书

ISO管理体系认证证书

ISO管理体系认证证书

高新技术企业证书

高新技术企业证书

中国分析测试协会会员单位

中国分析测试协会会员单位

中国质量协会会员证书

中国质量协会会员证书

AAA级信用企业证书

AAA级信用企业

绿色低碳诚信示范创建企业证书

绿色低碳诚信示范创建企业

仪器设备

1000余台精密设备 · 点击查看原图

气相色谱-质谱联用仪

气相色谱-质谱联用仪 GC-MS

复杂有机组分的定性鉴定与未知物剖析利器。

高效液相色谱仪

高效液相色谱仪 HPLC

食品添加剂、药品成分等热敏物质的精准检测。

电感耦合等离子体发射光谱仪

电感耦合等离子体发射光谱仪 ICP-OES

一次进样同时读出数十种金属元素含量。

傅里叶变换红外光谱仪

傅里叶变换红外光谱仪 FTIR

通过特征吸收峰快速判断材料种类与分子结构。

X射线荧光光谱仪

X射线荧光光谱仪 XRF

几分钟完成元素快检,且不损伤样品。

扫描电子显微镜

扫描电子显微镜 SEM

放大数十万倍观察表面微观结构,锁定失效根源。

液相色谱-质谱联用仪

液相色谱-质谱联用仪 LC-MS

农兽药残留等痕量物质的高灵敏确证检测。

气相色谱仪

气相色谱仪 GC

溶剂残留、香气成分等挥发性物质的专业检测。

在线工程师 一对一服务

检测需求不知从何入手?立即联系在线工程师,一对一解答检测疑问,免费获取检测方案与报价。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通