沙发和沙发床检测

沙发和沙发床检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 34441-2017软体家具 床垫燃烧性能的评价

本标准规定了软体家具床垫燃烧性能的术语与定义、要求、测试设备设施、检验方法和检验规则。本标准适用于各种场所使用的床垫、床垫和床底架。本标准不适用于在被套料和床垫芯之间没有铺垫料的水床和气床垫。

CB/T 550-2008船用金属吊床和柜床型式尺寸

本标准规定了船用金属吊床和柜床的分类、要求、试验方法、检验规则和标志、包装和运输。本标准适用于船用金属吊床和柜床。

CB 20170-2016舰船用铝蜂窝板式家具规范

本规范规定了舰船用铝蜂窝板式家具(以下简称家具)的要求、质量保证规定、交货准备、说明事项。本规范适用于舰船用铝蜂窝板式家具的设计、制造和验收。

QB/T 4190-2021软体家具 软体床

本文件规定了软体床的产品分类及推荐的主要尺寸、要求、检验规则，以及标志、使用说明、包装、运输和贮存，描述了相应的试验方法，并界定了相关的术语和定义。本文件适用于软体床的生产、检验和销售。本文件不适用于水床、充气床、双层床、沙发床。

QB/T 4191-2011多功能活动伸展机械装置

本标准规定了多功能活动伸展机械装置的术语、定义和符号、产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。本标准适用于安装在会客、家居、休闲等室内用途的多功能活动沙发内伸展机械装置。

QB/T 4768-2014沙发床

本标准规定了沙发床的术语和定义、产品分类、要求、试验方法,及检验规则和标志、包装、运输、贮存。本标准适用于沙发床产品。

SB/T 10645-2011沐浴企业服务质量要求

本标准规定了沐浴企业设施设备质量要求与服务质量要求。本标准适用于沐浴企业。

SN/T 4038-2014进出口木制品、家具通用技术要求

本标准规定了进出口木制品、家具的技术要求、试验方法，并给出了部分或地区的安全要求。本标准适用于以木制品和家具。

CNS 15521-2011居家用电动床

本标准规定居家长期使用之床，不但可以电动方式操作，并且能无段式调整背靠角度、腿靠角度及/或高度(以下简称床)。本标准不包括普通床、上下舖床、儿童用床、沙发床、医院用床及特殊功能床(具有调整背靠角度、大腿靠角度及/或高度之特殊功能床除外)。本标准不适用医护床。

UL 60335-2-8-2004家用和类似用途电器的安全.第2部分:电动剃须刀、电推子和类似电器的特殊要求

This clause of Part 1 is replaced by the following.This International Standard deals with the safety of electric shavers, hair clippers and similar appliances intended for household and similar purposes, their RATED VOLTAGE being not more than 250 V.Examples of similar appliances are those used for manicure, and pedicure. Appliances not intended for normal household use, but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops and on farms, are within the scope of this standard.Examples of such appliances are animal clippers, animal shearers and appliances for hairdressers.As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account: the use of appliances by young children or infirm persons without supervision; playing with the appliance by young children. Attention is drawn to the fact that: for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; in many countries additional requirements are specified by national health authorities, national authorities responsible for the protection of labour and similar authorities. This standard does not apply to: appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); massage appliances (IEC 60335-2-32); appliances for medical purposes (IEC 60601). 1 Modification of 1DV of the UL part 1: The articulate probe of figure 1DV shall replace the test finger of figure 1 for these products. 1 Modification of the second paragraph of the part 2 by replacement with 1dv.2.1 and 1dv.2.2: 1DV.2.1 These requirements cover hair clippers and shaving appliances to be employed in accordance with the National Electrical Code, NFPA 70. 1DV.2.2 These requirements cover appliances for household or commercial use on persons or animals, and appliances in which motion of an operating part is produced by electrical means. 1DV.2.2 Modification of Note 101 of the part 2 by replacement with the following: These requirements do not cover manicure, pedicure, or personal grooming appliances used for similar purposes. However, hair clipping and shaving appliances supplied with manicure, pedicure, or other similar attachments or accessories are investigated under these requirements and such additional requirements as are applicable to the appliance under consideration. 1DV.2.2 Modification of the third paragraph of the part 2 by replacement with the following: Motor-operated lather makers, lather makers incorporating heaters, barber shop vacuum cleaners for use on persons, and other types of hair clipping and shaving appliances not specifically named here are investigated under these requirements and under such additional requirements as are applicable to the appliance under consideration. 1DV.2.2 Modification of Note 103 of the part 2 to add the following items: for an appliance that utilizes some other source of energy - such as gas or steam - in addition to electric energy, additional requirements may be necessary. Additional requirements applicable to equipment designed for use in hazardous locations as defined in the National Electrical Code, ANSI/NFPA 70, are not included in this standard. 1DV.2.2 Addition to part 2: The values given in SI (metric) units are the standard. The values given in parentheses are for information only.

EN 13759-2012家具.座位和沙发床用操作机构.试验方法.德文版本EN 13759-2012

This European Standard specifies test methods for the determination of the durability of hand and power operated reclining mechanisms for adult seating.It also specifies test methods for the determination of the durability of mechanisms for converting sofas andchairs into beds.The test methods are based on use by a person weighing up to 110 kg. Requirements for the durability of reclining mechanisms are not included withinThis standard.Test methods for strength and durability of the structure are not included. It does not apply to the safety of electrically driven seating which is covered by the machinery, low voltage andEMC directives.It does not apply to tilting and reclining mechanisms fitted to work chairs.

GSO 2337-2014床垫、床垫垫、沙发床和床底的耐燃性规范

This GSO standard specifies requirements for the resistance to ignition of mattresses, mattress pads, divans and bed bases when tested in accordance with BS EN 597-1, BS EN 597-2 and BS 6807 including those used in areas vulnerable to arson. It does not apply to mattress protectors. The levels of ignition resistance have been set after careful consideration of the fire risk of the particular end-use environment involved. These levels do not necessarily reflect the behavior of the mattress, mattress pad, divan or bed base in a fully developed fire.

GSO 2345-2014床垫、床垫、沙发床和床垫的耐燃性规范-试验方法

This Gulf standard specifies test method for requirements for the resistance to ignition of mattresses, mattress pads, divans and bed bases.

NF D61-011-2012家具 - 座位和沙发床用操作机构 - 试验方法.

La présente Norme européenne spécifie des méthodes d'essai permettant de déterminer la durabilité des mécanismes d'inclinaison manuels ou électriques équipant les sièges pour adultes.Elle prescrit également des méthodes d'essai pour la détermination de la durabilité des mécanismes permettant de convertir en lits des canapés et des sièges.Les méthodes d'essai sont basées sur l'utilisation par une personne dont la masse est au plus de 110 kg. Les exigences de durabilité des mécanismes d'inclinaison ne sont pas incluses dans cette norme.Les méthodes d'essai de résistance et de durabilité de la structure ne sont pas incluses.La présente norme ne s'applique pas à la sécurité des sièges électriques qui sont traités dans les Directives machines, basse tension et CEM.Elle ne s'applique pas aux mécanismes de basculement et d'inclinaison équipant les sièges de travail.