海螵蛸、蛤壳检测

海螵蛸、蛤壳检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 6572-2014土方机械 液压挖掘机 术语和商业规格

本标准规定了自行履带式和轮胎式液压挖掘机及其工作装置和附属装置的术语和商业文件的技术内容。本标准适用于通用的挖掘机及部件,不适用于步履式挖掘机专用的部件术语或商业规格。

GB/T 13332-2008土方机械.液压挖掘机和挖掘装载机.挖掘力的测定方法

本标准规定了液压挖掘机和挖掘装载机的挖掘力测定方法。本标准适用于GB/T 8498中定义的液压挖掘机和挖掘装载机。

GB/T 19930.2-2014土方机械 挖掘机保护结构的实验室试验和性能要求 第2部分:6t以上挖掘机的滚翻保护结构(ROPS)

GB/T 19930的本部分建立了在静载荷作用下统一的、可重复的评价滚翻保护结构(ROPS)载荷承受性能的方法,并规定了对典型试件在这样载荷作用下的性能要求。本部分适用于ISO 6165规定的大于6 t并小于50 t的液压挖掘机的ROPS。当机器围绕其回转机架的纵轴滚翻360°,且与小于坡度30°硬黏土路面没有失去接触时,ROPS将为系座椅安全带的司机确保小的挤压保护空间。ROPS被应用在有滚翻危险存在的地方。本部分适用于基本型挖掘机或用于物件吊运、拆除或带磁盘、蛤壳式铲斗、抓斗或多爪夹具等附属装置的派生挖掘机的ROPS。本部分不适用于带司机室起升装置的挖掘机。

GB/T 22357-2008土方机械.机械挖掘机.术语

本标准规定了自行的履带式和轮胎式机械挖掘机及其工作装置/附属装置的术语。机械挖掘机主要用于牵引、挖掘、抓取及临时吊装作业。机械挖掘机的主机在钻孔、打桩等特殊应用中，常被用作工作装置/附属装置的载体，这些工作装置/附属装置的尺寸规格不在本标准范围之内。

GB/T 25687.1-2017土方机械 同义术语的多语种列表 第1部分:综合

GB/T 25687的本部分给出了中文、英文、法文和俄文的土方机械综合术语的同义语列表，这些术语已经由现有的标准所定义。制定本部分的目的是：——促进世界范围内土方机械信息的交流，特别是确保使用者之间的交流正确和一致；——明确人士(销售、售后服务、技术、零部件分销等)之间信息的交流；——简化通关操作及统计调查；——对于不同的市场，尽可能翻译成适用的主要语言。这些术语是以英文术语的字母顺序进行排列和编号的，并且每项术语都由引用的标准所定义。

GB/T 35938-2018条斑紫菜 丝状体培育技术规范

本标准规定了条斑紫菜(Pyropia yezoensis)丝状体生产性培育的术语和定义、培育设施、果孢子采苗、培育、病害与防治和壳孢子采苗的技术要求。本标准适用于条斑紫菜丝状体生产培育，果孢子采苗、壳孢子采苗的质量评定。

GB/T 36193-2018水产品加工术语

本标准规定了水产品加工领域常用的基本术语。本标准适用于水产品加工业的生产、流通、科研、教学及管理等相关领域。

SC 2056-2006青蛤

本标准给出了青蛤（Cyclina sinensis）的学名与分类、主要形态特征、生长与繁殖、细胞遗传学特性及检测方法。 本标准适用于青蛤的种质检测与鉴定。

ITU-T L.12-2008光纤接头

This Recommendation deals with the application of splices of single-mode and multimode opticalfibres. It describes a suitable procedure for splicing that shall be carefully followed in order toobtain reliable splices between optical fibres or ribbons. This procedure applies both to single fibresor ribbons (mass splicing). In addition, this Recommendation advises on the optical, mechanicaland environmental testing methods, required for the splice system design and equipmentqualification . Further information is provided in the CCITT Manual \"Construction, installation,jointing and protection of optical fibre cables\".The fibres shall be in accordance with ITU-T Recommendations [1] to [7].

DIN 105-6-2013粘土砌块.第6部分:高精度砌块

This document applies to flat bricks used for structural and non-structural masonry. Flat bricks with particular dimensional accuracy with special regard to the brick height. Their density does not exceed 1,6 kg/dm3.

DIN EN 617-2011连续搬运设备和系统.筒仓,燃料,箱柜和储料器内散装材料的储存用设备的安全性和电磁兼容性(EMC)要求;德文版 EN 617-2001+A1-2010

This European Standard deals with the technical requirements to minimise the hazards listed in clause 4 and annex A. These hazards can arise during the operation and maintenance of equipment to store bulk materials in silos, bunkers, bins and hoppers and their built-in inlet and outlet devices when carried out in accordance with the specifications given by the manufacturer or his authorised representative. This standard deals with safety related technical verification during commissioning. Safety requirements and/or measures in this standard apply to equipment used in all environments. However, additional risk assessment and safety measures need to be considered in severe conditions, e. g. low or high temperatures out of the range covered by EN 60204-1, corrosive environments, strong magnetic fields, radioactive conditions and bulk materials to be stored included their flow the nature of which could lead to a dangerous situation. This European Standard deals with the technical requirements for electromagnetic compatibility (EMC).

DIN EN 1538-2015专用土工工程施工.隔水墙.德文版本EN 1538-2010+A1-2015

This European Standard specifies the execution of diaphragm walls and the practical aspects which must be taken into account in the production of the working drawings. Diaphragm walls can be permanent or temporary structures. The following types are concerned: 1) retaining walls: usually made to support the sides of an excavation in the ground. They include: cast in situ concrete diaphragm walls; precast concrete diaphragm walls; reinforced slurry walls. 2) cut-off diaphragm walls: usually made to prevent migration of groundwater, clear or polluted, or of other liquids present in the ground. They include: slurry walls (possibly with membranes or sheetpiles); plastic concrete walls.

DIN EN 16715-2015液化石油产品. 中间馏分燃料的点火延迟和衍生十六烷值 (DCN) 的测定. 使用通过直接燃油喷射进行的定容燃烧室测定点火延迟和燃烧延迟; 德文版本EN 16715-2015

This European Standard specifies a test method for the quantitative determination of ignition and combustion delays of middle distillate fuels intended for use in compression ignition engines. The method utilizes a constant volume combustion chamber with direct fuel injection into heated, compressed synthetic air. This European Standard is applicable to middle distillate fuels, fatty acid methyl esters (FAME) and blends of diesel fuels and FAME. The method is also applicable to middle distillate fuels of non-petroleum origin, oil-sands based fuels, blends of fuel containing biodiesel material, diesel fuel oils containing cetane number improver additives and low-sulfur diesel fuel oils.

DIN EN 60191-6-16-2007半导体器件的机械标准.第6-16部分:半导体试验术语表和BGA、LGA、FBGA和FLGA型老化座孔

This part of DIN EN 60191 gives a glossary of semiconductor sockets for BGA, LGA, FBGA and FLGA. This standard intends to establish definition and unification of terminology relating to tests and burn-in sockets for BGA, LGA, FBGA and FLGA.

BS 6349-8-2007海工建筑物.滚装斜坡道、连桥和人行道设计实施规程

This part of BS 6349 gives recommendations for the design ofroll-on/roll-off (Ro-Ro) ramps, linkspans and walkways, used for thetransfer of passengers and vehicles between shore and ship.It applies to the structural elements only and does not cover the designof any operational equipment, traffic control, mechanical or electricalequipment, heating, lighting, life saving or rescue equipment other thanas the structures forming a facility need to incorporate and/or supportany of these features. Most geometrical aspects of fixed shore ramps arecovered in this part of BS 6349, but recommendations for all otheraspects are given in BS 6349-2.This part of BS 6349 does not apply to Ro-Ro facilities used by railvehicles in that it does not give recommendations for railway loadingand associated ramp gradients. However, many of its recommendationsare applicable to rail Ro-Ro facilities and can be used in the absence ofother guidance.NOTE This part of BS 6349 is generally intended to cover facilitiesconstructed in the British Isles. Although the majority of the contents aredirectly applicable elsewhere, local conditions might necessitatemodifications, e.g. environmental effects and traffic loading.

BS 7121-4-2010起重机安全使用实施规程.卡车式装载机

This part of BS 7121 gives recommendations for the safe use of lorryloaders. Subjects covered include management, selection of equipment,selection and training of personnel, procedures and precautions,testing, inspection, maintenance and examination.This part of BS 7121 is intended to be used in conjunction withBS 7121-2, which provides general guidance on the inspection, testingand examination of all types of cranes.