固体生物燃料检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 10184-2015电站锅炉性能试验规程

本标准规定了燃用煤、油、气(主要指天然气)和生物质燃料的电站锅炉性能试验(包括鉴定试验、验收试验和常规试验)方法。本标准适用范围如下：a)　适用于蒸汽流量不低于35 t/h，蒸汽压力不低于3.8 MPa，蒸汽温度不低于440 ℃的电站锅炉；b)　适用于为了其他目的(包括燃烧调整、燃料变动、设备改进等)进行的锅炉性能试验；c)　燃用其他燃料的电站锅炉性能试验可参照本标准执行。本标准不适用于核电站蒸汽发生器的性能试验以及余热锅炉、垃圾焚烧锅炉的性能试验。

GB 17411-2015船用燃料油

本标准规定了由石油制取的船用燃料油的分类和代号、要求和试验方法、检验规则、包装、标志、运输、贮存及安全。本标准适用于海［洋］船用柴油机及其锅炉用燃料油。符合本标准的燃料油也适用于同样或类似制造的固定式柴油机和其他船舶用机械。本标准规定了用于船舶的4种馏分燃料油和6种残渣燃料油。其中馏分燃料DMX供柴油机应急时使用。

GB/T 30366-2013生物质术语

本标准界定了生物质一般概念、生物质来源、生物质转化和加工、生物质利用等相关的术语。本标准适用于生物质及其相关领域的标准化文件和技术文件,用于定义通用的术语。

GB/T 31741-2015林业生物质能源名词术语

本标准规定了林业生物质能资源培育和加工利用领域的名词术语和定义。本标准适用于林业、生物质能源及有关行业教学、科研、生产、加工、经营及管理等领域。

NY/T 2449-2013农村能源术语

本标准规定了农村能源术语、定义。本标准适用于农村能源建设中的技术推广、生产经营、科研、管理、教学及其他应用领域。

NB/T 10012-2014生物燃料乙醇行业环境污染控制评价技术方法

本标准适用于以淀粉质、糖质及纤维素质为主要原料的燃料乙醇生产企业(包括现有、改扩建或新建)环境污染控制的评价。本标准为生物燃料乙醇(简称“燃料乙醇”)企业环境污染控制评价提供依据。

NB/T 13001-2015生物液体燃料加工转化领域项目可行性研究报告编制内容规定

本标准规定了生物液体燃料加工转化领域项目可行性研究报告的编制原则、内容和成果要求。本标准适用于生物液体燃料加工转化领域核准类项目可行性研究报告的编制，其他生物质能源项目可参照执行。

DL/T 958-2014名词术语.电力燃料

本标准规定了电力燃料名词术语的名称、英文译名及其定义。本标准适用于电力燃料的技术标准、技术文件、科技书籍、期刊、教材和手册。

DL/T 1033.10-2016电力行业词汇第10部分:电力设备

本部分规定了电力设备的名词词汇。本部分适用于电力行业工作人员、高等院校师生在对外交流、定货、签订合同、设备验收和学术交流时使用。

ISO 14780-2017固体生物燃料. 制样

This document defines methods for reducing combined samples (or increments) to laboratory samples and laboratory samples to sub-samples and general analysis samples and is applicable to solid biofuels. The methods defined in this document can be used for sample preparation, for example, when the samples are to be tested for calorific value, moisture content, ash content, bulk density, durability, particle size distribution, ash melting behaviour, chemical composition, and impurities

ISO 16967-2015固体生物燃料. 主要元素的测定. 铝, 钙, 铁, 镁, 磷, 钾, 硅, 钠和钛

This International Standard describes methods for the\ndetermination of major elements of solid biofuels respectively of\ntheir ashes, which are Al, Ca, Fe, Mg, P, K, Si, Na, Ti. The\ndetermination of other elements such as barium (Ba) and manganese\n(Mn) is also possible with the methods described in this\nInternational Standard.\nThis International Standard includes two parts: Part A describes\nthe direct determination on the fuel, this method is also\napplicable for sulfur and minor elements, Part B gives a method of\ndetermination on a prepared 550 °C ash.

ISO 16968-2015固体生物燃料. 次要元素的测定

This International Standard is intended for the determination of\nthe minor elements Arsenic, Cadmium, Cobalt, Chromium, Copper,\nMercury, Manganese, Molybdenum, Nickel, Lead, Antimony, Vanadium,\nand Zinc in all solid biofuels. Further, it describes methods for\nsample decomposition and suggests suitable instrumental methods for\nthe determination of the elements of interest in the digests. The\ndetermination of other elements such as Selenium, Tin, and Thallium\nis also possible with the method described in this International\nStandard.

ISO 16993-2016固体生物燃料. 一个主要成分到另一个的分析结果转换

This International Standard gives formulae which allow analytical data relating to solid biofuels to be expressed on the different bases in common use. Consideration is given to corrections that can be applied to certain determined values for solid biofuels prior to their calculation to other bases. In Annex A, tools for integrity checks of analytical results are given. In Annex B, conversion factors for calculation into other units are given. Annex C is a guideline for the use of validation parameters as can be found in ISO/TC 238 analytical standards.

ISO 16994-2016固体生物燃料. 硫和氯总含量的测定

This International Standard describes methods for the determination of the total sulfur and total chlorine content in solid biofuels. This International Standard specifies two methods for decomposition of the fuel and different analytical techniques for the quantification of the elements in the decomposition solutions. The use of automatic equipment is also included in this International Standard, provided that a validation is carried out as specified and that the performance characteristics are similar to those of the method described in this International Standard.

ISO 17225-2-2021固体生物燃料. 燃料规范和等级. 第2部分: 分级木制丸状燃料

This document determines the fuel quality classes and specifications of graded wood pellets for nonindustrial and industrial use. This document covers only wood pellets produced from the following raw materials (see ISO 17225-1:2021, Table 1): — 1.1 Forest, plantation and other virgin wood; — 1.2 By-products and residues from wood processing industry; — 1.3.1 Chemically untreated used wood. Thermally treated biomass pellets (e.g. torrefied pellets) are not included in the scope of this document.

ISO 17225-3-2021固体生物燃料. 燃料规范和等级. 第3部分: 分级木块

This document determines the fuel quality classes and specifications of graded wood briquettes. This document covers only wood briquettes produced from the following raw materials (see ISO 17225-1: 2021, Table 1): — 1.1 Forest, plantation and other virgin wood — 1.2 By-products and residues from wood processing industry — 1.3.1 Chemically untreated used wood NOTE Thermally treated biomass briquettes (e.g. torrefied briquettes) are not included in the scope of this document.