针织西服检测

GB/T 15557-2008服装术语

本标准规定了服装及服饰工业常用的术语、定义或说明。本标准适用于服装和服饰设计、生产、技术、教学、贸易及其相关领域。

GB/T 22701-2019职业服装检验规则

本标准规定职业服装的术语和定义、检验分类、检验依据、检验项目、组批规则和抽样方案、判定规则和复验规定。本标准适用于以纺织织物为主要面料成批生产的职业服装。

GB/T 24662-2009电子商务.产品核心元数据

本标准规定了电子商务活动中产品核心元数据及其表示方法，给出了电子商务产品核心元数据的扩展规则和方法。本标准适用于电子商务活动中对产品基本信息的分类、编目、发布和查询。

GB/T 32670-2016电子商务交易产品信息描述 服装

本标准规定了电子商务交易中服装类产品信息描述属性、方法、模型、摘要描述以及扩展方法。本标准适用于电子商务交易中服装类产品信息的采集、发布、交换、存储和管理等。

GB/T 35459-2017中式立领男装

本标准规定了中式立领男装的术语和定义、要求、检验方法、检验规则，以及标志、包装、运输和贮存。本标准适用于以纺织机织物为主要面料生产的中式立领男装。本标准不适用于年龄在14岁及以下的婴幼儿及儿童穿着的服装。

SN/T 0006-2015检验检疫纺织标准编制指南

本标准规定了进出口纺织品检验检疫行业标准的结构和编写的一般原则。本标准适用于进出口纺织品检验检疫行业标准编写指导。

FZ/T 73056-2016针织西服

本标准规定针织西服产品的产品号型、要求、检验规则、判定规则以及产品使用说明、包装、运输和贮存。本标准适用于鉴定以针织物为主要面料生产的男、女西服（套）等服装的品质。本标准不适用于年龄在36个月及以下的婴幼儿服装。

FZ/T 81010-2018风衣

本标准规定了风衣的要求、检验方法、检验规则，以及标志、包装、运输和贮存。本标准适用于以纺织机织物为主要面料生产的风衣。本标准不适用于年龄在36个月及以下的婴幼儿服装。

DB50/T 104-2002洗染业服务质量标准

本标准规定了洗染业服务质量的术语和定义、服务要求、服务质量；本标准适用于我市行政区域内各种经济成分的洗染公司、洗染店、洗衣厂及其它从事洗染业的经营单位。

DB42/T 154-2003学生服装通用技术规范

本标准规定了学生服装的要求、检验方法、检验分类规则以及标志、包装、运输和贮存等技术特征。本标准适用于以纺织织物为原料成批生产的学生服装。

DIN 23320-1-2014矿业用耐火防护服.矿井救生和毒气救生人员用防护服.第1部分.安全性要求和试验

Flameproof protective clothing are used in the mining to protect against explosions, flames and other flame jets. The document describes the requirement out to DIN EN 469.

DIN EN ISO 11611-2015焊接及相关工艺用防护服(ISO 11611-2015);德文版本EN ISO 11611-2015

This International Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves and gaiters that are designed to protect the wearer's body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. For the protection of the wearers head and feet, this International Standard is only applicable to hoods and gaiters. This International Standard does not cover requirements for feet, hand, face and/or eye protectors.This type of protective clothing is intended to protect the wearer against spatter (small splashes of molten metal), short contact time with flame, radiant heat from an electric arc used for welding and allied processes, and minimizes the possibility of electrical shock by short-term, accidental contact with live electrical conductors at voltages up to approximately 100 V d. c. in normal conditions of welding. Sweat, soiling or other contaminants can affect the level of protection provided against short-term accidental contact with live electric conductors at these voltages. For adequate overall protection against the risks to which welders are likely to be exposed, personal protective equipment (PPE) covered by other standards should additionally be worn to protect the head, face, hands and feet. Guidance for the selection of the type of welders clothing for different welding activities is detailed in Annex A of this International Standard.

DIN EN ISO 11612-2015防护服装.隔热和阻燃防护服装.低性能要求(ISO 11612-2015);德文版本EN ISO 11612-2015

This International Standard specifies performance requirements for protective clothing made from flexiblematerials, which are designed to protect the wearers body, except the hands, from heat and/or flame. Forprotection of the wearers head and feet, the only items of protective clothing falling within the scope of thisInternational Standard are gaiters, hoods and overboots. However, concerning hoods, requirements for visorsand respiratory equipment are not given. The performance requirements set out in this International Standard are applicable to protective clothing which could be worn for a wide range of end uses, where there is a need for clothing with limited flame spread properties and where the user can be exposed to radiant or convective or contact heat or to molten metal splashes. This International Standard is not applicable to protective clothing that is specified by other InternationalStandards (see introduction).

DIN EN ISO 14116-2015防护服装.防火焰.限制火焰蔓延的材料、材料组件及衣服(ISO 14116-2015);德文版本EN ISO 14116-2015

This International Standard specifies the performance requirements for the Limited Flame Spread properties of all materials, all material assemblies and protective clothing in order to reduce the possibility of the clothing burning when in occasional and brief contact with small flames and there by itself constituting a hazard. Additional requirements for clothing are also specified, including design requirements, mechanical requirements, marking andinformation supplied by the manufacturer. When protection against heat hazards is necessary in addition to protection against flame, this standard is not appropriate. Standards such as ISO 11612, should be used. A classification system is given for materials, material assemblies and garments which are tested according toISO 15025, Procedure A.