橡胶防焦剂 CTP检测

橡胶防焦剂 CTP检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 9851.4-2008印刷技术术语.第4部分:平版印刷术语

GB/T 9851的本部分规定了平版印刷用语，以保证在生产、教学和学术等活动中正确应用概念。本部分适用于印刷行业及其相关编写标准、出版、教学、科研及供国内外技术交流中使用。

GB/T 16886.7-2015医疗器械生物学评价 第7部分:环氧乙烷灭菌残留量

GB/T 16886的本部分规定了经环氧乙烷(EO)灭菌的单件医疗器械上EO及2-氯乙醇(ECH)残留物的允许限量、EO及ECH的检测步骤以及确定器械是否可以出厂的方法。资料性附录中还给出了其他背景信息，包括指南和本部分应用流程图。本部分不包括不与患者接触的经EO灭菌的器械(如体外诊断器械)。

GB/T 21871-2017橡胶配合剂 符号及缩略语

本标准规定了已知、特定化学成分的橡胶配合剂的符号和缩略语。

GB/T 24801-2019防焦剂 N-环己基硫代邻苯二甲酰亚胺(CTP)

本标准规定了防焦剂N-环己基硫代邻苯二甲酰亚胺(简称防焦剂CTP)技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于以环己基次磺酰氯和邻苯二甲酰亚胺为主要原料，经缩合反应而制得的防焦剂CTP。化学名称：N-环己基硫代邻苯二甲酰亚胺。分子式：C<下标14>H<下标15>NO<下标2>S相对分子质量：261.28(按2016年相对原子质量)CAS RN：17796-82-6

GB/T 25675-2010印刷机械 资源利用技术条件

本标准规定了印刷机械资源利用技术条件的术语和定义、设备、要求、产品评价。本标准适用于制版、印刷、印后加工设备及相关辅助设备。本标准主要包括下列资源：水;电能;油;材料;其他。

GB/T 33580-2017橡胶塑料挤出机能耗检测方法

本标准规定了橡胶塑料挤出机(以下简称挤出机)电能消耗的检测方法。本标准适用于单螺杆和双螺杆橡胶塑料挤出机。本标准不适用于橡胶挤出压片机、塑料发泡挤出机和阶式塑料挤出机。

GB 50422-2017预应力混凝土路面工程技术规范

本规范适用于无粘结预应力混凝土路面的设计、施工及验收。

CECS 140-2011给水排水工程埋地预应力混凝土管和预应力钢筒混凝土管管道结构设计规程

本规程适用于埋地敷设的预应力混凝土管和预应力钢筒混凝土管管道的结构设计。其埋设条件为素土平基、人工土孤基础及混凝土基础。

CECS 158-2015膜结构技术规程

本规程适用于膜结构的设计、制作、安装、验收及维护。

JB/T 11191-2011爆炸性气体环境用荧光灯

本标准规定了爆炸性气体环境用荧光灯（以下简称荧光灯）的产品分类、基本参数、技术要求、试验方法、检验规则、标志、包装、运输及贮存等。本标准适用于荧光灯的设计、制造与检验。荧光灯用于工厂爆炸性气体环境及腐蚀性的介质中,作为照明用。

ASTM D6338-2009基于ASTM标准测试方法的高交联热塑性硫化橡胶（HCTPVs）的标准分类体系

1.1 This classification system covers highly crosslinked thermoplastic vulcanizates (HCTPVs) for extrusion, molding and other fabrication methods. HCTPVs are thermoplastic elastomers (TPEs) consisting of two or more polymer systems at least one of which is rubbery and highly (>95 %) crosslinked and at least one of which is thermoplastic, with each system having its own phase. The thermoplastic phase will tend to be continuous and the rubbery phase discontinuous. The high level of crosslinking and ultrafine particle size (ca 1 x03BC;m diameter) of the rubbery phase give rise to properties more closely approaching those of conventional thermoset rubber, when compared to the same thermoplastic/rubbery polymer composition with a lower level (x2264;95 %) of crosslinking. The HCTPV polymer compositions may contain fillers, reinforcing agents, plasticizers, resins, antidegradants, colorants and other beneficial constituents. Recycled HCTPVs are not covered in this classification system. 1.2 Included in this classification system are the properties necessary to identify the respective compositions. For specialized applications, other requirements may be needed to identify specific characteristics. 1.3 As given in IEEE/ASTM SI-10, values in SI units are to be regarded as standard. Note 18212;There is no known ISO equivalent to this standard. 1.4 This standard is based on testing completed in accordance with ASTM standard test methods. 1.5 The following safety hazards caveat pertains only to the test methods portion, Section 12, of this classification system. This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

EN ISO 17078-2-2007石油和天然气工业.钻井和生产设备.第2部分:偏心轴的流控制装置

This part of ISO 17078 provides requirements for subsurface flow-control devices used in side-pocket mandrels (hereafter called flow-control devices) intended for use in the worldwide petroleum and natural gas industry. This includes requirements for specifying, selecting, designing, manufacturing, quality-control, testing and preparation for shipping of flow-control devices. Additionally, it includes information regarding performance testing and calibration procedures.The installation and retrieval of flow-control devices is outside the scope of this part of ISO 17078. Additionally,this part of ISO 17078 is not applicable to flow-control devices used in ce

NF S99-501-7-2008医疗器械的生物学评估.第7部分:环氧乙烷灭菌残留量

La présente partie de l'ISO 10993 spécifie les limites admissibles des résidus d'oxyde d'éthylène (OIE) et de chlorhydrate d'éthylène (ECH) pour des dispositifs médicaux individuels stérilisés à l'oxyde d'éthylène, les modes opératoires pour le mesurage de l'oxyde d'éthylène et du chlorhydrate d'éthylène et les méthodes de mesure en vue de déterminer leur conformité et de procéder à leur libération. Une documentation supplémentaire, y compris des directives et un diagramme de flux sont également inclus dans les annexes informatives.Les dispositifs stérilisés à l'oxyde d'éthylène ne présentant pas de contact avec le patient (par exemple les dispositifs de diagnostic in vitro) ne sont pas couverts par la présente partie de l'ISO 10993.

DIN EN ISO 17078-2-2010石油和天然气工业.钻探和生产设备.第2部分:偏心轴的流控制装置(ISO 17078-2-2007+Cor. 1-2009).英文版本EN ISO 17078-2-2007 + AC-2009,仅有光盘版

This European Standard contains requirements on flow control devices for side-pocket mandrels.

BS EN 60194-2006印制板设计、制造和组装.术语和定义

This International Standard defines the terminology used in the field of printed circuitboards and printed circuit board assembly products.

BS EN ISO 10993-7-2008医疗器械的生物学评估.环氧乙烷灭菌残留量

This part of ISO 10993 specifies allowable limits for residual ethylene oxide (EO) and ethylene chlorohydrin(ECH) in individual EO-sterilized medical devices, procedures for the measurement of EO and ECH, andmethods for determining compliance so that devices may be released. Additional background, includingguidance and a flowchart showing how this document is applied, are also included in the informative annexes.EO-sterilized devices that have no patient contact (e.g., in vitro diagnostic devices) are not covered by thispart of ISO 10993.

BS EN ISO 17078-2-2007石油和天然气工业.钻井和生产设备.偏心轴的流控制装置

This part of ISO 17078 provides requirements for subsurface flow-control devices used in side-pocketmandrels (hereafter called flow-control devices) intended for use in the worldwide petroleum and natural gasindustry. This includes requirements for specifying, selecting, designing, manufacturing, quality-control, testingand preparation for shipping of flow-control devices. Additionally, it includes information regardingperformance testing and calibration procedures.The installation and retrieval of flow-control devices is outside the scope of this part of ISO 17078. Additionally,this part of ISO 17078 is not applicable to flow-control devices used in centre-set mandrels or with tubingretrievableapplications.This part of ISO 17078 does not include requirements for side-pocket mandrels, running, pulling, and kickovertools, and latches that might or might not be covered in other ISO specifications. Reconditioning of usedflow-control devices is outside of the scope of this part of ISO 17078.

ANSI/ASTM D6338-1998高位交叉连接热塑性硫化橡胶(HCTPVs)分类制度

This classification system covers highly crosslinked thermoplastic vulcanizates (HCTPVs) for extrusion, molding and other fabrication methods. HCTPVs are thermoplastic elastomers (TPEs) consisting of two or more polymer systems at least one of which is rubbery and highly (95 %) crosslinked and at least one of which is thermoplastic, with each system having its own phase. The thermoplastic phase will tend to be continuous and the rubbery phase discontinuous. The high level of crosslinking and ultrafine particle size (ca 1 ?m diameter) of the rubbery phase give rise to properties more closely approaching those of conventional thermoset rubber, when compared to the same thermoplastic/rubbery polymer composition with a lower level (95 %) of crosslinking. The HCTPV polymer compositions may contain fillers, reinforcing agents, plasticizers, resins, antidegradants, colorants and other beneficial constituents. Recycled HCTPVs are not covered in this classification system. Included in this classification system are the properties necessary to identify the respective compositions. For specialized applications, other requirements may be needed to identify specific characteristics. As given in IEEE/ASTM SI-10, values in SI units are to be regarded as standard. Note 1 -There is no equivalent ISO standard. The following safety hazards caveat pertains only to the test methods portion, Section 12, of this classification system.This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.