成分分析 · 材料检测 · 食品检测 · 环境检测

专业检测知识科普,帮您选对检测方案

咨询工程师

便携式和移动燃气具检测

发布时间:2024-06-21 作者:中析研究所 浏览:

SB/T 10864-2012家用燃气灶具拆装和维修服务技术规范

本标准规定了家用燃气灶具在使用场所和规定场所拆装和维修服务的技术要求、操作规范及质量测评方法。本标准适用于家庭和类似用途环境中使用燃气的家用燃气灶具。

DIN EN 624-2011专用LPG器具规范.在车辆和船舶上安装的室内密封LPG空间加热装置;德文版本EN 624-2011

This European standard specifies the characteristics of safety, construction, performance and efficiency, the test methods and marking, of room sealed space heating equipment of types C(see CEN/TR 1749)with combustion air intake and outlet for the products of combustion in the wall, roof of floor,combined or not.

DIN EN 15069-2010用于连接使用气体燃料的家用电器的金属软管组件用燃气安全连接阀; 德文版本EN 15069: 2008

The objective of this European Standard is to achieve the safe operation of gas connection valves for use with metal hose assemblies by specifying the requirements of performance, materials and test methods. Metal hose assemblies are referred to in prEN 14800 and prEN 15070. These valves are suitable for connection to domestic appliances inside or outside a dwelling using gas at a pressure of up to and including 0,5 bar. These valves are designed for the use with movable appliances; they may also be used for the connection of fixed appliances. The term gas relates to the first, second and third families as referred to in EN 437,Table 1.

BS 5440-1-2008额定热输入不超过70kW的燃气器具用烟道及通风设备(第1、2和3类家用燃气).烟囱燃气器具的安装和烟囱的维修用规范

This part of BS 5440 specifies requirements for the installation of gasappliances to chimneys, chimney installation work likely to beundertaken by gas engineers and operatives working under UK gasindustry conditions and requirements for the maintenance of chimneys.It is applicable to open flue chimneys for Type B gas appliances androom-sealed chimney configurations for Type C gas appliances, each ofrated input not exceeding 70 kW net (see Note 2 and Note 3), burning1st, 2nd or 3rd family gases. It applies to chimneys of the naturaldraught or fanned draught type and is applicable to open flue chimneysand room-sealed chimneys supplied with the appliance as well as tothose supplied separately.It complements the requirements for the design, installation andcommissioning of chimneys as required in BS EN 15287-1 andBS EN 15287-2 and requires extra details that are specific to the UK gasindustry. This is kept in perspective by quoting some details ofBS EN 15287-1 and BS EN 15287-2.It specifies the following:• requirements for the selection of the appropriate flueing option forgas appliances in the UK;• requirements for the installation of gas appliances to newchimneys, or chimney configurations;• requirements for the installation of gas appliances to existingchimneys or chimney configurations;• requirements for the installation of appliances which carry a CEmark and for which the manufacturer’s instructions are availableto the installer;• requirements installation of appliances which do not carry a CEmark and used/second-hand appliances for which themanufacturer’s instructions are available to the installer.This part of BS 5440 is applicable to:• complete chimney and all chimney components from the applianceconnection to the discharge point into outside air;• the installation of gas appliances to existing chimneys that wereintended originally for appliances burning other fuels;• chimneys for residential park homes but not to chimneys forleisure accommodation vehicles.This part of BS 5440 is not applicable to gas-fired incinerators. Refer toBS 5871-3 for the installation of decorative fuel effect appliances.This part of BS 5440 includes compatibility of appliances installed inthe UK with new chimneys designated under BS EN 1443 and withexisting chimneys, including non-designated chimneys.

BS 5546-2010额定输入不超过70kW的家用燃气供热水装置的安装和维修规范

This British Standard specifies requirements for the selection,installation, inspection, commissioning and maintenance of gas‑firedwater-heating appliances, which have a rated heat input notexceeding 70 kW, based on net calorific value.It applies to water-heating appliances utilizing 1st, 2nd or 3rd familygases designed to operate in the condensing or non‑condensingmode for the supply of hot water for domestic purposes in domesticdwellings or domestic dwellings in commercial premises.This standard does not apply to:a) water-heating appliances with a rated input of over 70 kW;b) hot water supply systems in multiple dwellings supplied from acentral source.It does not cover the detailed design and installation of the whole hotwater distribution system, which was specified in BS 5449.This standard applies to water-heating appliances which carry aCE mark and also to previously used water-heating appliances whichdo not carry the CE mark (see 5.3.1).

BS 5871-2-2005燃气炉、对流式加热器、回火锅炉和装饰性燃料气体器具的安装和维修规范.输入热量不超过15kW的插入式燃料气体炉和回火锅炉(2类和3类家用燃气)

This part of BS 5871 specifies installation and maintenance requirements for inset live fuel effect gas fires of heat input not exceeding 15 kW (16.6 kW based on gross calorific value) burning 2nd and 3rd family gases for the purpose of heating rooms or spaces in domestic (see Note 5) or commercial premises. Combined appliances of the type where a fire is used in conjunction with a boiler or circulator are also covered in so far as the installation of the combined appliance is concerned.\nThe standard is applicable to appliances intended for installation either:\na) within a builder's opening and/or fireplace recess and which may, additionally, be suitable for installation in a purpose designed metal flue box conforming to BS 715 and flue conforming to the constructional and temperature requirements of BS EN 1856-1 and BS EN 1856-2; or\nb) using a direct flue connection, if specified in the manufacturer's instructions; or\nc) in the case of a room sealed appliance, using a flue terminal/air duct assembly supplied by the appliance manufacturer.\nThis standard covers the selection of a suitable appliance, the ventilation and flueing requirements, and other measures necessary to ensure a safe installation.\nThe central heating and/or hot water system connected to a combined appliance is not within the scope of this standard and reference should be made to BS 5449 (see Note 6) and BS 5546 for this part of such an installation.\nThis standard is not applicable to mobile and portable appliances conforming to BS EN 449 or to appliances in touring caravans.\nAdditional requirements for the installation of fire/back boilers and fire/back circulators are specified in Clauses 15, 16, 17 and 18.\nNOTE 1 Inset live fuel effect gas fires differ from decorative fuel effect gas appliances, which burn gas so as to simulate a solid fuel fire or produce other decorative effects, in that they incorporate a heat exchanger and restrict the passage of the products of combustion between the appliance firebed and the chimney or flue. The only decorative fuel effect gas appliances covered by this part of BS 5871 are those shown in Figure lb) and detailed in 1d) of the commentary and recommendations on Clause 5 of this standard.\nNOTE 2 Unless the context requires otherwise, inset live fuel effect gas fires are hereinafter referred to as fires.\nNOTE 3 Heat inputs in this document are based on net calorific value. Figures based on gross calorific value are given in parenthesis where deemed necessary. See also Clause 5, commentary and recommendations g).\nNOTE 4 Attention is drawn to the foreword concerning the installation of used appliances.\nNOTE 5 As well as normally constructed dwellings, domestic premises include any permanently sited caravan holiday homes, residential park homes and permanently moored boats. See IGE/UP/8 [8].\nNOTE 6 BS 5449 has been partly replaced by BS EN 12828 and BS EN 12831, and is to be withdrawn once BS EN 14336 and BS EN 14337 are published.

BS 5871-4-2007煤气加热器、对流式加热器、回火锅炉和装饰性燃料气体器具的安装和维修规范.额定热输入不超过6kW的独立式无烟道煤气加热器、对流式加热器和加热炉(2类和3类家用煤气)

This part of BS 5871 specifies installation and maintenancerequirements for independent gas-fired flueless fires, convector heatersand heating stoves of nominal heat input not exceeding 6 kW burning2nd and 3rd family gases for the purpose of heating rooms or internalspaces in domestic (see note 3) or commercial premises. Specifically, itcovers:a) fixed appliances that satisfy all the requirements of BS EN 14829;b) fixed appliances that satisfy the combustion requirements ofBS EN 14829;c) convector heaters of nominal heat input not exceeding 4.2 kW inthe form of greenhouse heaters in respect of single applianceinstallations.NOTE 1 Appliances a) and b) are only intended as a secondary heatsource (see Commentary and Recommendations on 4.2).The heat input and ventilation, fixing and gas supply for convectorheaters in the form of greenhouse heaters are specified in 8.4, 9.4 andClause 11, respectively.This part of BS 5871 covers the selection of a suitable appliance, roomsizing and ventilation requirements and other measures necessary toensure a safe installation.NOTE 2 Heat inputs in this document are based on net calorific value.[See also Commentary and Recommendations on Clause 5, item b).]NOTE 3 As well as normally constructed dwellings, domestic premisesinclude any permanently sited caravans, holiday homes and residentialpark homes. (See IGE/UP/8 [9].)NOTE 4 Convector heaters in the form of greenhouse heaters areavailable in two forms, those which are freestanding and those which areintended to be fixed to a wall or floor.This standard is not applicable to:a) mobile and portable appliances conforming to BS EN 449;b) appliances in motor caravans and touring caravans;c) appliances in boats;d) installations in agricultural premises; ore) installations in transportable accommodation units.NOTE 5 For the maintenance of existing installations of 3rd familyflueless appliances in boats, see PD 5482-3.

BS 7967-5-2010住宅和其它楼宇中一氧化碳及燃气设施的燃烧性能.第5部分: 非住宅楼宇中采用便携式电子燃烧气体分析仪测量一氧化碳和二氧化碳及测定燃烧性能的指南

This standard gives guidance for identifying and investigating spillage,leakage or build‑up of combustion products from gas-fired appliances innon-domestic premises. It gives recommendations for determining thecombustion performance of such equipment, using electronic portablecombustion gas analysers. This involves sampling and measuring thecarbon monoxide (CO) and carbon dioxide (CO) in the ambient air andin gas-fired appliance chimneys.This standard is for use with equipment using 1st, 2nd or 3rd familygases.NOTE 1 An operative attending non-domestic premises might berequired to examine standard gas-fired appliances which are domestic orcommercial as well as customized process plant/equipment.NOTE 2 This standard does not cover the response of an emergency serviceprovider (ESP) to a gas emergency. It also does not cover procedures forinvestigating incidents that are reportable under the Reporting of Injuries,Diseases and Dangerous Occurrences Regulations 1995 (RIDDOR) andthe Gas Safety (Management) Regulations 1996 (GSMR).NOTE 3 Combustion products from gas-fired appliances containaldehydes and oxides of nitrogen (NOx), predominantly nitrogenmonoxide (nitric oxide, NO) and nitrogen dioxide (NO). Although thisstandard does not cover the measurement of these substances, quantitiesof such products could be present in the air and could cause harm andirritation to humans. For guidance on the health considerations associatedwith these combustion products, see the Institute for Environment andHealth assessment, Indoor air quality in the home: Nitrogen dioxide,formaldehyde, volatile organic compounds, house dust mites, fungi andbacteria.

上一篇公路工程水泥搅拌桩检测 下一篇饱和土层检测

相关阅读

了解更多检测知识

道桥材料检测

道桥材料检测覆盖水泥、沥青、集料、钢筋及结构混凝土等对象,通过取样规范、力学试验、化学分析与无损检测等手段,测定强度、变形、耐久等关键指标。本文按样品制备、检测方法、指标测定到判定标准的步骤展开,说明各环节操作要点,并给出第三方检测机构的选择要素,可用于工程质量控制与验收参考。

2026-11-13 | [其他]

洗衣凝珠检测

洗衣凝珠检测围绕成分、性能与安全三大维度展开,涵盖取样规范、HPLC法测定活性物含量、表面活性剂鉴定与酶活分光光度法测定、去污力与溶解性能试验、微生物限量与重金属指标判定。本文按流程分述各检测方法与操作要点,供质量控制与委托检测参考。

2026-11-09 | [其他]

绿色食品检测

绿色食品检测覆盖农药残留、重金属、微生物限量及理化品质等维度。本文按样品制备、GC-MS农残测定、ICP-MS重金属测定、平板计数法微生物检验的顺序说明操作要点,并阐述灵敏度、回收率等方法验证指标与判定标准,适合标志申报与质量控制场景参考。

2026-11-07 | [其他]

吐鲁番葡萄检测

吐鲁番葡萄检测围绕样品采集制备、农药残留GC-MS与HPLC分析、糖度及营养成分分光光度测定、重金属与微生物联检等环节展开。检测依据食品安全国家标准中的限量要求判定,报告可用于收购分级、市场准入及地理标志产品核查,检测流程规范、结果可追溯。

2026-10-31 | [其他]

食品过敏原检测

食品过敏原检测覆盖样本制备、ELISA蛋白筛查、PCR基因成分鉴定及LC-MS/MS质谱确证等环节。检测针对乳、蛋、花生、坚果、麸质等常见致敏成分,以检出限、特异性、回收率等指标评价方法性能,判定结果用于交叉污染控制、标签标示与进出口合规管理。

2026-10-29 | [其他]

二硫化钼检测

二硫化钼检测围绕物相结构、微观形貌、粒度分布与化学纯度展开,常用X射线衍射鉴别2H与1T晶型及杂相,拉曼光谱判断层数与缺陷状态,扫描电镜观察颗粒形貌,激光粒度法测定粒径分布,ICP光谱定量杂质元素。本文按制样、表征、指标判定的流程介绍各方法操作要点与适用场景。

2026-10-29 | [其他]

我们的优势

选择中析研究所的八大理由

资质齐全

旗下实验室依法依规开展检测,报告科学公正,获监管与客户广泛认可。

设备先进

上千台精密仪器定期检定校准,量值溯源体系完善。

专家团队

多领域技术专家,十年以上经验,破解各类疑难检测。

标准覆盖广

覆盖GB、行标及ISO、ASTM等国际标准,可定制方案。

周期短

常规项目7-10个工作日出报告,流程标准高效。

加急服务

支持加急检测通道,助力客户快速完成质量把关。

一对一服务

工程师全程对接,需求沟通到报告解读全流程陪伴。

数据保密

严格保密制度,客户样品与检测数据安全无忧。

旗下实验室资质

我司旗下实验室具备CMA资质认定及CNAS认可,具体项目是否在资质认定/实验室认可范围内请与工程师确认。

CMA检验检测机构资质认定证书

CMA检验检测机构资质认定证书

CNAS实验室认可证书

CNAS实验室认可证书

ISO管理体系认证证书

ISO管理体系认证证书

高新技术企业证书

高新技术企业证书

中国分析测试协会会员单位

中国分析测试协会会员单位

中国质量协会会员证书

中国质量协会会员证书

AAA级信用企业证书

AAA级信用企业

绿色低碳诚信示范创建企业证书

绿色低碳诚信示范创建企业

仪器设备

1000余台精密设备 · 点击查看原图

气相色谱-质谱联用仪

气相色谱-质谱联用仪 GC-MS

复杂有机组分的定性鉴定与未知物剖析利器。

高效液相色谱仪

高效液相色谱仪 HPLC

食品添加剂、药品成分等热敏物质的精准检测。

电感耦合等离子体发射光谱仪

电感耦合等离子体发射光谱仪 ICP-OES

一次进样同时读出数十种金属元素含量。

傅里叶变换红外光谱仪

傅里叶变换红外光谱仪 FTIR

通过特征吸收峰快速判断材料种类与分子结构。

X射线荧光光谱仪

X射线荧光光谱仪 XRF

几分钟完成元素快检,且不损伤样品。

扫描电子显微镜

扫描电子显微镜 SEM

放大数十万倍观察表面微观结构,锁定失效根源。

液相色谱-质谱联用仪

液相色谱-质谱联用仪 LC-MS

农兽药残留等痕量物质的高灵敏确证检测。

气相色谱仪

气相色谱仪 GC

溶剂残留、香气成分等挥发性物质的专业检测。

在线工程师 一对一服务

检测需求不知从何入手?立即联系在线工程师,一对一解答检测疑问,免费获取检测方案与报价。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通