粗制铜钴检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 6274-2016肥料和土壤调理剂术语

本标准给出了肥料和土壤调理剂的术语和定义，分为以下几类：一般术语、产品术语、物理性质术语、物理化学性质术语、安全术语和采样术语。本标准适用于用于保持或改善植物营养和土壤物理化学性质以及生物活性的各种物料。

MT/T 1097-2008煤矿机电设备检修技术规范

本规范为企业的设备检修提供指导意见,可作为企业制定设备检修细则、检修操作规程和设备完好标准的依据。本规范执行《煤炭法》、《矿山安全法》、《煤矿安全监察条例》、《煤矿安全规程》等煤炭法律、法规、规程和管理标准,执行和有关煤炭行业的所有技术标准。本规范通用部分的技术要求和计量单位等执行或有关行业的技术标准。

SJ/T 11143-1997计算机用普通话语音库规范

本标准主要适用于中文信息处理的语音处理系统，另外对语音研究、语音评测也具有指导作用。

YS/T 1332.1-2019粗制铜钴原料化学分析方法第1部分：钴含量的测定电位滴定法

本部分规定了粗制铜钴原料中钴含量的测定方法。\r 本部分适用于粗制铜钴原料中钴含量的测定。测定范围：5.00 %~60.00 %。

YS/T 1332.2-2019粗制铜钴原料化学分析方法第2部分：铜含量的测定碘量法

本部分规定了粗制铜钴原料中铜含量的测定方法。\r 本部分适用于粗制铜钴原料中铜含量的测定，测定范围：4.00 %～30.00 %。

YS/T 1332.3-2019粗制铜钴原料化学分析方法第3部分：硫含量的测定高频燃烧-红外光谱法

本部分规定了粗制铜钴原料中硫含量的测定方法。\r 本部分适用于粗制铜钴原料中硫含量的测定。测定范围： 0.010 %~4.00 %。

YS/T 1333-2019粗制铜钴原料

本标准规定了粗制铜钴原料的技术要求、试验方法、检验规则、包装、标志、运输、贮存、质量预报单及订货单(或合同)内容。本标准适用于在电炉或鼓风炉中将富钴氧化精矿还原熔炼成的粗制铜钴原料。

YS/T 1412-2021钴冶炼企业单位产品能源消耗限额

本标准规定了钴冶炼企业单位产品能源消耗(以下简称能耗)限额的术语和定义、技术要求、统计范围、计算方法和节能管理与措施。本标准适用于以硫化钴铜矿、粗碳酸钴、粗氢氧化钴、粗制铜钴原料、电池废料以及镍冶炼钴渣等为原料的钴冶炼企业产品能耗的计算、考核，以及对新建项目的能耗要求。

EN ISO 13628-1-2005石油和天然气工业.水下采油系统的设计和操作.第1部分:一般要求和建议 ISO 13628-1-2005

This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment.This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbons from one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floating or subsea) or onshore, or to inject water/gas through subsea wells.This part of ISO 13628 and its related subsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are not specifically discussed because of their limited use. However, the information presented is applicable to those types of equipment.If requirements as stated inThis part of ISO 13628 are in conflict with, or are inconsistent with, requirements as stated in the relevant complementary parts of ISO 13628, then the specific requirements in the complementary parts take precedence.

BS EN ISO 13628-1-2005+A1-2010石油和天然气工业.水下采油系统的设计和操作.第1部分:一般要求和推荐规范

This part of ISO 13628 provides general requirements and overall recommendations for development ofcomplete subsea production systems, from the design phase to decommissioning and abandonment. Thispart of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with moredetailed requirements for the subsystems which typically form part of a subsea production system. However,in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) moredetailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbonsfrom one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floatingor subsea) or onshore, or to inject water/gas through subsea wells. This part of ISO 13628 and its relatedsubsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are notspecifically discussed because of their limited use. However, the information presented is applicable to thosetypes of equipment.If requirements as stated in this part of ISO 13628 are in conflict with, or are inconsistent with, requirementsas stated in the relevant complementary parts of ISO 13628, then the specific requirements in thecomplementary parts take precedence.