欢迎访问中科光析科学技术研究所官网!

您的位置:首页 > 其他

铁路车辆材料和部件的防火性能检测

发布日期: 2024-06-21 17:34:53 - 更新时间:2024年06月29日 15:22

铁路车辆材料和部件的防火性能检测项目报价?  解决方案?  检测周期?  样品要求?

点 击 解 答  

HG/T 5367.1-2018轨道交通车辆用涂料 第1部分:水性涂料

本部分规定了轨道交通车辆用水性涂料的术语和定义、要求、试验方法、检验规则以及标志、包装、贮存等内容。本部分适用于施涂于地铁、轻轨、有轨电车、普通列车和高速列车等轨道交通车辆表面的水性涂料,其涂层具有装饰和保护作用。

CJ/T 353-2010城市轨道交通车辆贯通道技术条件

本标准规定了城市轨道交通车辆贯通道的使用条件、主要性能、要求、试验方法、检验规则、标志、包装、运输和贮存等。本标准适用于城市轨道交通车辆所用折棚式贯通道的制造和检验,其他型式的贯通道可参照采用。

DIN EN 438-3-2016装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第3部分:用于粘结支撑基质的不足2毫米厚的层压制件的分类和规范.德文版本EN 438-3-2016

This Part of EN 438 applies to laminates less than 2 mm thick produced by using an high pressure process, normally intended for bonding to supporting substrates to produce HPL composite panels and establishes a classification system for high-pressure decorative laminates according to their performance and main recommended fields of application, including materials with special characteristics, for example formability or defined reaction to fire. This Part of EN 438 also specifies requirements for the properties of the various types of laminates covered by this classification system.

DIN EN 438-4-2016装饰用高压层压制件(HPL).基于热固性树脂的薄板材(通常称为层压制件).第4部分:厚度为2毫米和大于2毫米的压实层压制件的分类和规范.德文版本EN 438-4-2016

This Part of EN 438 specifies performance requirements for two types of Compact laminate of thickness 2 mm or greater intended for interior use. High-pressure decorative Compact laminates are characterised by their aesthetic qualities, strength, durability and functional performance. Compact HPL sheets are available in a wide variety of colours, patterns and surface finishes; they are extremely strong, and resistant to wear, impact, scratching, moisture, heat and staining; and possess good hygienic and anti-static properties, being easy to clean and maintain. EN 438-2 specifies the methods of test relevant to this part of EN 438.

DIN EN 45545-4-2015轨道交通.轨道车辆的防火.第4部分:机车车辆设计的防火安全性要求.德文版本EN 45545-4-2013

This part specifies fire safety requirements for railway vehicle design to cover the objectives defined in EN 45545-1. The measures and requirements specified in this part of EN 45545 aim to protect passengers and staff in railway vehicles in the event of a fire on board by minimizing the risk of a fire starting, delaying the fire development and controlling the spread of fire products through the railway vehicle, thus aiding evacuation. It is not within the scope of this standard to describe measures which ensure the preservation of the railway vehicles in the event of a fire.

DS/EN 45545-2-2013铁路设施.铁路车辆的防火.第2部分:材料和部件的防火性能要求

This part specifies the reaction to fire performance requirements for materials and products used on railway vehicles as defined in FprEN 45545-1.The operation and design categories defined in FprEN 45545-1 are used to establish hazard levels that are use

上一篇:车内水平向上表面产品检测 下一篇:车内垂直表面产品、车内有限表面、压条检测
以上是中析研究所铁路车辆材料和部件的防火性能检测检测服务的相关介绍,如有其他检测需求可咨询在线工程师进行了解!

前沿科学公众号 前沿科学 微信公众号
中析抖音 中析研究所 抖音
中析公众号 中析研究所 微信公众号
中析快手 中析研究所 快手
中析微视频 中析研究所 微视频
中析小红书 中析研究所 小红书
京ICP备15067471号-35版权所有:北京中科光析科学技术研究所