铝蜂窝地板检测

铝蜂窝地板检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

HB 5339-2011金属结构胶接质量控制

本标准规定了金属结构胶接的人员、设备、仪表及工装、材料、工艺过程、环境、文件与资料等要求。本标准适用于金属结构胶接的质量控制。

HB 8438-2014民用飞机复合材料结构设计通用要求

本标准规定了民用飞机复合材料结构的设计原则、选材、强度/刚度、损伤容限、耐久性及典型结构的设计要求和相关的验证要求。本标准适用于民用运输类飞机，其他飞机可参照使用。

MH/T 6061-2010飞机厨房手推车、物品箱及相关组件的低设计和性能

本标准规定了安装在运输类飞机厨房和其他区域的手推车、物品箱及相关组件的低设计和性能要求，以及供储存舱设计人员和设备安装人员使用的安装要求。 本标准适用于但不限于下列安装在运输类飞机厨房和其他区域的设备： a) 全长车和半长车(主要用于装载饮料、物品箱、食物、商品和垃圾)； b) 折叠车； c) 物品箱(便携箱、标准箱和餐箱)； d) 储存在手推车和(或)厨房储存舱里的非固定相关组件，如抽屉、托盘、垃圾箱衬里或其他类似组件。 本标准没有完全涵盖以下内容： a) 具有自备的机械制冷系统、电动机、其他电器部件或通过加压系统分配饮料的手推车或物品箱。 b) 延长使用寿命和持续适航的设计细则，因为这些细则可能随以下因素变化： 1) 厨房和食品(饮料)系统总体设计； 2) 营运人希望的人因工程； 3) 手推车或物品箱的使用方法和注意事项； 4) 手推车或物品箱的维护方法； c) 民用航空规章、相关公众健康规章和(或)设计细则的相关要求，该要求涵盖在客舱服务人员或飞机制造商对主要设备的规范中。

MH/T 6104-2014航空地毯抗静电性能的试验方法

本标准规定了测试航空地毯的抗静电性能的试验方法。本标准适用于评估飞机客舱内地毯的抗静电性能。

DB11/T 512-2007建筑装饰工程石材应用技术规程

本规程适用于建筑装饰工程中装饰石材的材料、设计、加工制作、施工、验收以及防护、保养和翻新。

EN 14015-2004在室温及高于环境温度液体储存用平底,立式,圆柱形,现场建造的地面上可焊钢罐的设计和制造规范

This document specifies the requirements for the materials, design, fabrication, erection, testing and inspection of site built, vertical, cylindrical, flat bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperatures and above, and the technical agreements that need to be reached (see Annex A).

BS EN 14015-2004在室温和高于室温下液体储存用现场建造的立式、圆柱形、平底、地上用焊接钢罐的设计和制造规范

1 This document specifies the requirements for the materials, design, fabrication, erection, testing and inspection of site built, vertical, cylindrical, flat bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperatures and above, and the technical agreements that need to be reached (see Annex A).\nThis document does not apply to tanks where the product is refrigerated to maintain it as a liquid at atmospheric pressure (see prEN 14620).\nThis document is concerned with the structural integrity of the basic tank structure and does not provide requirements for considering process design, operational issues, safety and firefighting facilities, in-service inspection, maintenance or repair. These aspects are covered in detail in other Codes of Practice (see Annex B).\n2 This document applies to closed-top tanks, with and without internal floating covers (see Annex C) and open-top tanks, with and without floating roofs (see Annexes D and E). It does not apply to 'lift-type' gas holders.\n3 This document applies to storage tanks with the following characteristics:\na) design pressure less than 500 mbar and design internal negative pressure not lower than 20 mbar (see 5.1 for pressure limitations);\nb) design metal temperature not lower than -40 ℃ and not higher than +300 ℃ (see 5.2.2);\nc) maximum design liquid level not higher than the top of the cylindrical shell.\n4 The limits of application of this document terminate at the following locations.\n— face of the first flange in a bolted flange connection;\n— first threaded joint on the pipe or coupling outside of the tank shell, roof or bottom;\n— first circumferential joint in a pipe not having a flange connection.\n5 This document is applicable to steel tanks with a maximum design strength ≤ 260 N/mm.\n6 In addition to the definitive requirements, this document also requires the items detailed in Annex A to be documented. For compliance with this document, both the definitive requirements and those required in Clause 4 have to be satisfied.\nnote:1) All pressures are in mbar gauge unless otherwise stated.

IS 11649 Pt.2-1986铝蜂窝夹层板民用飞机地板规范第2部分试验方法

Prescribes the methods of tests for honeycomb type sandwich panel for civil aircraft floors.