成分分析 · 材料检测 · 食品检测 · 环境检测

专业检测知识科普,帮您选对检测方案

咨询工程师

4,7号牙科弯手机检测

发布时间:2024-06-21 作者:中析研究所 浏览:

GB/T 4754-2017国民经济行业分类

本标准规定了全社会经济活动的分类与代码。本标准适用于在统计、计划、财政、税收、工商等宏观管理中,对经济活动的分类,并用于信息处理和信息交换。

GB/T 40362-2021电动牙刷 一般要求和检测方法

本文件规定了电动牙刷的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。本文件适用于以电池为动力的电动牙刷。本文件不适用于电动牙间刷等口腔护理用具。

GB/T 41230-2022牙科学 间接牙科修复体CAD/CAM系统数字化设备 准确度评价试验方法

本文件描述了用于间接牙科修复的计算机辅助设计/计算机辅助制造(CAD/CAM)系统数字化设备准确度评估的试验方法。本文件适用于光学或机械接触系统的数字化设备,不适用于手持式扫描仪,也不适用于通过影像学方法(X射线)以及通过磁共振成像方法(MRI)实现数字化的设备。

GB/T 41426-2022牙科学 一体式手柄牙线

本文件规定了用于家庭护理、社区护理、口腔健康护理或牙科治疗的一体式手柄牙线的要求和测试方法。本文件适用于手持一体式手柄牙线的使用。本文件不适用于可持续供应牙线的手柄牙线,或可更换牙线的手柄牙线。本文件不包含特定的用于证明产品免于不可接受的生物风险的定性和定量测试方法。若评价这类生物风险,见ISO 10993-1和ISO 7405。

MT 427-1995超氧化钾片状生氧剂技术条件

本标准规定了超氧化钾片状生氧剂的技术要求、试验方法、检验规则、包装、贮存和运输。\t本标准适用子隔绝式化学氧自救器用的片状超氧化钾生氧剂(以下简称生氧剂)。

QB/T 4748-2014牙线

本标准规定了牙线的术语和定义、要求、试验方法、检验规则、标志。本标准适用于可作为辅助清洁牙齿的不带柄、可连续供线的牙线产品。

QB/T 4749-2014牙线棒

本标准规定了牙线棒的术语和定义、要求、试验方法、检验规则、标志。本标准适用于可作为辅助清洁牙齿的牙线棒产品。

WS/T 472-2015口腔健康调查 检查方法 

本标准规定了口腔健康调查中的基本检查方法、评判标准、记录代码和记录方法。本标准适用于或局部地区针对人群开展的口腔健康调查或疾病监测,可根据不同的调查目的选择不同的检查内容。

SN/T 4705-2016化学品 蜜蜂幼虫单次暴露毒性试验

本标准规定了化学品蜜蜂幼虫单次暴露毒性试验的方法。本标准适用于测试化学品(尤其是具有杀虫活性的成分或制剂)对蜜蜂幼虫的单次暴露毒性。

AS_NZS 4184.2.7-2002医学影像科室的评估和常规检测第2.7部分:恒定性测试口腔内牙齿造影设备(IEC 61223-2-7:1999,MOD)

This part of IEC 61223 applies to radiological installations with diagnostic X-ray systems designed to expose intra-orally placed radiographic films or electronic equipment (sensors), but excluding dental panoramic equipment.This standard is a part of a series of Particular Publications (standards and technical reports), which give methods of tests for the constancy of operation of various subsystems of diagnostic X-ray equipment.This part of IEC 61223 is designed to be applicable to equipment for intra-oral dental radiography without digital imaging devices.

AS_NZS 4184.3.4-2002医学影像科室的评估和常规检测第3.4部分:验收测试牙科X射线设备的成像性能

This part of IEC 61223 applies to those components of dental X-ray equipment using radiographic imaging systems which influence the image quality and patient dose.This standard applies to the performance of the acceptance test on dental X-ray equipment with intra-oral X-ray image receptor and dental X-ray equipment with extra-oral X-ray image receptor (for example, dental panoramic X-ray equipment or cephalometric X-ray).This standard applies to dental film and digital image acquisition and processing.

ISO 4049-2019牙科学. 聚合物基修复材料(第五版)

This document specifies requirements for dental polymer-based restorative materials supplied in a form suitable for mechanical mixing, hand-mixing, or intra-oral and extra-oral external energy activation, and intended for use primarily for the direct or indirect restoration of the teeth and for luting. The polymer-based luting materials covered by this document are intended for use in the cementation or fixation of restorations and appliances such as inlays, onlays, veneers, crowns and bridges. This document does not cover those polymer-based luting materials that have an adhesive component within the structure of the material (see ISO/TS 16506). The document does not cover polymer-based materials intended to prevent caries (see ISO 6874), core materials or those used for veneering metal sub-frames (see ISO 10477).

ISO 4865-1-2023

This document specifies requirements and test methods common to all non-hinged hand instruments used in dentistry, including materials, hardness, surface finish, resistance to reprocessing and information for marking, although some can have additional specific requirements and test methods. This document does not specify terms and definitions or classification of specific types of hand instruments. This document excludes powered instruments. The classification and the shape of working ends of nonhinged hand instruments are excluded from this document.

ASTM B440-2000(2005)镉的标准规范

1.1 This specification covers refined cadmium metal in slab, ball or stick form.1.2 The values stated in inch-pound units are to be regarded as the standard.1.3 ToxicityWarning: Soluble and respirable forms of cadmium may be harmful to human health and the environment in certain forms and concentrations. Therefore, ingestion and inhalation of cadmium should be controlled under the appropriate regulations of the U.S. Occupational Safety and Health Administration (OSHA). Cadmium-containing alloys and coatings should not be used on articles that will contact food or beverages, or for dental and other equipment that is normally inserted in the mouth. Similarly, if articles using cadmium-containing alloys or coatings are welded, soldered, brazed, ground, \"flame-cut,\" or otherwise heated during fabrication, adequate ventilation must be provided to maintain occupational cadmium exposure below the OSHA Permissible Exposure Level (PEL).This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

ASTM B440-2011镉的标准规格

1.1 This specification covers refined cadmium metal in slab, ball or stick form. 1.2 Toxicity8212;Warning: Soluble and respirable forms of cadmium may be harmful to human health and the environment in certain forms and concentrations. Therefore, ingestion and inhalation of cadmium should be controlled under the appropriate regulations of the U.S. Occupational Safety and Health Administration (OSHA). Cadmium-containing alloys and coatings should not be used on articles that will contact food or beverages, or for dental and other equipment that is normally inserted in the mouth. Similarly, if articles using cadmium-containing alloys or coatings are welded, soldered, brazed, ground, x201C;flame-cut,x201D; or otherwise heated during fabrication, adequate ventilation must be provided to maintain occupational cadmium exposure below the OSHA Permissible Exposure Level (PEL). 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

ASTM B440-2012金属镉标准规格

1.1 This specification covers refined cadmium metal in slab, ball or stick form. 1.2 Toxicity8212;Warning: Soluble and respirable forms of cadmium may be harmful to human health and the environment in certain forms and concentrations. Therefore, ingestion and inhalation of cadmium should be controlled under the appropriate regulations of the U.S. Occupational Safety and Health Administration (OSHA). Cadmium-containing alloys and coatings should not be used on articles that will contact food or beverages, or for dental and other equipment that is normally inserted in the mouth. Similarly, if articles using cadmium-containing alloys or coatings are welded, soldered, brazed, ground, x201C;flame-cut,x201D; or otherwise heated during fabrication, adequate ventilation must be provided to maintain occupational cadmium exposure below the OSHA Permissible Exposure Level (PEL). 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Material Safety Data Sheet (MSDS) for this product/material as provided by the manufacturer, to establish appropriate safety and health practices, and determine the applicability of regulatory limitations prior to use.

ASTM D4926-1989(1994)e1用X-射线粉末衍射法对触煤剂中含硅和铝矾土的触煤剂中伽马铝矾土含量的试验方法

1.1 This test method covers the determination of gamma alumina and related transition aluminas in catalysts containing silica and alumina by X-ray powder diffraction, using the diffracted intensity of the peak occurring at about 67176;20 when copper K945; radiation is employed.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

CFR 40-441.10-2017环境保护. 第441部分:牙科诊所点源类别. 第441.10节:适用性.

(a) Except as provided in paragraphs (c), (d), and (e) of this section, this part applies to dental dischargers.

上一篇气动牙科手机用软管连接件检测 下一篇打孔器检测

相关阅读

了解更多检测知识

道桥材料检测

道桥材料检测覆盖水泥、沥青、集料、钢筋及结构混凝土等对象,通过取样规范、力学试验、化学分析与无损检测等手段,测定强度、变形、耐久等关键指标。本文按样品制备、检测方法、指标测定到判定标准的步骤展开,说明各环节操作要点,并给出第三方检测机构的选择要素,可用于工程质量控制与验收参考。

2026-11-13 | [其他]

洗衣凝珠检测

洗衣凝珠检测围绕成分、性能与安全三大维度展开,涵盖取样规范、HPLC法测定活性物含量、表面活性剂鉴定与酶活分光光度法测定、去污力与溶解性能试验、微生物限量与重金属指标判定。本文按流程分述各检测方法与操作要点,供质量控制与委托检测参考。

2026-11-09 | [其他]

绿色食品检测

绿色食品检测覆盖农药残留、重金属、微生物限量及理化品质等维度。本文按样品制备、GC-MS农残测定、ICP-MS重金属测定、平板计数法微生物检验的顺序说明操作要点,并阐述灵敏度、回收率等方法验证指标与判定标准,适合标志申报与质量控制场景参考。

2026-11-07 | [其他]

吐鲁番葡萄检测

吐鲁番葡萄检测围绕样品采集制备、农药残留GC-MS与HPLC分析、糖度及营养成分分光光度测定、重金属与微生物联检等环节展开。检测依据食品安全国家标准中的限量要求判定,报告可用于收购分级、市场准入及地理标志产品核查,检测流程规范、结果可追溯。

2026-10-31 | [其他]

食品过敏原检测

食品过敏原检测覆盖样本制备、ELISA蛋白筛查、PCR基因成分鉴定及LC-MS/MS质谱确证等环节。检测针对乳、蛋、花生、坚果、麸质等常见致敏成分,以检出限、特异性、回收率等指标评价方法性能,判定结果用于交叉污染控制、标签标示与进出口合规管理。

2026-10-29 | [其他]

二硫化钼检测

二硫化钼检测围绕物相结构、微观形貌、粒度分布与化学纯度展开,常用X射线衍射鉴别2H与1T晶型及杂相,拉曼光谱判断层数与缺陷状态,扫描电镜观察颗粒形貌,激光粒度法测定粒径分布,ICP光谱定量杂质元素。本文按制样、表征、指标判定的流程介绍各方法操作要点与适用场景。

2026-10-29 | [其他]

我们的优势

选择中析研究所的八大理由

资质齐全

旗下实验室依法依规开展检测,报告科学公正,获监管与客户广泛认可。

设备先进

上千台精密仪器定期检定校准,量值溯源体系完善。

专家团队

多领域技术专家,十年以上经验,破解各类疑难检测。

标准覆盖广

覆盖GB、行标及ISO、ASTM等国际标准,可定制方案。

周期短

常规项目7-10个工作日出报告,流程标准高效。

加急服务

支持加急检测通道,助力客户快速完成质量把关。

一对一服务

工程师全程对接,需求沟通到报告解读全流程陪伴。

数据保密

严格保密制度,客户样品与检测数据安全无忧。

旗下实验室资质

我司旗下实验室具备CMA资质认定及CNAS认可,具体项目是否在资质认定/实验室认可范围内请与工程师确认。

CMA检验检测机构资质认定证书

CMA检验检测机构资质认定证书

CNAS实验室认可证书

CNAS实验室认可证书

ISO管理体系认证证书

ISO管理体系认证证书

高新技术企业证书

高新技术企业证书

中国分析测试协会会员单位

中国分析测试协会会员单位

中国质量协会会员证书

中国质量协会会员证书

AAA级信用企业证书

AAA级信用企业

绿色低碳诚信示范创建企业证书

绿色低碳诚信示范创建企业

仪器设备

1000余台精密设备 · 点击查看原图

气相色谱-质谱联用仪

气相色谱-质谱联用仪 GC-MS

复杂有机组分的定性鉴定与未知物剖析利器。

高效液相色谱仪

高效液相色谱仪 HPLC

食品添加剂、药品成分等热敏物质的精准检测。

电感耦合等离子体发射光谱仪

电感耦合等离子体发射光谱仪 ICP-OES

一次进样同时读出数十种金属元素含量。

傅里叶变换红外光谱仪

傅里叶变换红外光谱仪 FTIR

通过特征吸收峰快速判断材料种类与分子结构。

X射线荧光光谱仪

X射线荧光光谱仪 XRF

几分钟完成元素快检,且不损伤样品。

扫描电子显微镜

扫描电子显微镜 SEM

放大数十万倍观察表面微观结构,锁定失效根源。

液相色谱-质谱联用仪

液相色谱-质谱联用仪 LC-MS

农兽药残留等痕量物质的高灵敏确证检测。

气相色谱仪

气相色谱仪 GC

溶剂残留、香气成分等挥发性物质的专业检测。

在线工程师 一对一服务

检测需求不知从何入手?立即联系在线工程师,一对一解答检测疑问,免费获取检测方案与报价。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通