婴幼儿及儿童用品检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 20002.1-2008标准中特定内容的起草.第1部分:儿童安全

GB/T 20002的本部分提供了解决儿童使用或接触产品、过程或服务（尽管它们并非为儿童而专门设计）可能给儿童带来的意外身体伤害（危险）问题的框架，以便减少对儿童的伤害风险。本部分主要适用于参与标准编制和修订的人员，也包含了设计师、建筑师、制造商、服务提供者、宣传者和政策制定者等关注的重要信息。对于有特殊需要的儿童，补充适当的要求是可取的。本部分并未全面涉及这些补充要求。对于预防或减少心理或精神伤害或故意伤害，本部分没有提供任何专门的指导。

GB 28482-2012婴幼儿安抚奶嘴安全要求

本标准规定了婴幼儿安抚奶嘴的术语和定义、安全要求、测试方法、包装方式及产品信息。本标准适用于组装成为婴幼儿安抚奶嘴或者功能用作为婴幼儿安抚奶嘴的产品，市场上作医疗用途的器具除外。本标准不适用于设计供专门医师用作医疗用途的类似产品。例如，那些供涉及皮尔罗宾症或者早产婴儿用的类似产品。这些特殊的情况在资料性附录A中已有描述。本标准不适用于喂食用途的奶嘴。

GB 29281-2012游戏围栏及类似用途童床的安全要求

本标准规定了游戏围栏及类似用途童床的安全要求、试验方法。本标准适用于供体重不大于15kg儿童使用的家用游戏围栏和类似围栏用途童床，不适用于摇篮和吊床。本标准不适用于游戏围栏及类似用途童床上的悬挂玩具、健身玩具及类似玩具，且不适用于游戏围栏和类似用途童床能被转换成其他功能的安全技术要求。

GB 30585-2014儿童鞋安全技术规范

本标准规定了儿童鞋安全技术的术语和定义、产品分类、技术要求、试验方法、判定。本标准适用于用各种材料制作的、供14周岁及以下儿童(鞋号不大于250 mm)日常穿用的鞋类。本标准不适用于童胶鞋。

GB/T 31900-2015机织儿童服装

本标准规定了机织儿童服装的要求、检验方法、检验分类规则，以及标志、包装、运输和贮存等全部技术特征。本标准适用于以纺织机织物为主要面料生产的儿童服装。本标准不适用于年龄在36个月及以下的婴幼儿服装。

GB/T 35270-2017婴幼儿背带(袋)

本标准规定了婴幼儿背带(袋)的要求、检验方法、使用说明、检验规则，以及包装、运输和贮存等技术特征。本标准适用于头部有一定直立支撑力，可垂直依附于成人身体躯干上的婴幼儿(年龄宜4个月及以上)使用的背带(袋)产品。

GB/T 37647-2019玩具及儿童用品特定元素的迁移试验通则

本标准规定了玩具及儿童用品中的特定元素在模拟人体环境中迁移试验的取样方法、试样制备和试样提取方法。本标准适用于玩具及儿童用品中的特定元素——铝、锑、砷、钡、硼、镉、铬、钴、铜、铅、锰、汞、镍、硒、锶、锡、锌在模拟人体环境(包含汗液、唾液和胃液环境)中的迁移试验预处理。其他特定元素的迁移试验在经过验证后可参照本标准进行。本标准不适用于考虑到儿童的正常使用和可预见行为，由于其可触及性、功能、质量、大小或其他特征，可明显排除被吮吸、舔食、咀嚼、吞咽或长期与皮肤接触的可能性的玩具或儿童用品。

QB/T 2880-2016儿童皮鞋

本标准规定了使用胶粘、缝制、模压、硫化、注塑、灌注等工艺，以天然皮革、人造革、合成革为主要帮面制造的儿童皮鞋的术语和定义、分类、要求、试验方法、检验项目及判定规则、标志、包装、运输、贮存。本标准适用于一般穿用的儿童皮鞋和婴幼儿皮鞋。以纺织品或其他材料为帮面，采用同等制作工艺制作的儿童皮鞋可参照执行本标准。

SN/T 4674-2016输东盟纺织品安全项目检验规范

本标准规定了输东盟纺织品的基本安全项目的技术要求、试验方法和检验规则，并给出了其安全项目的限定指标及主要内容。本标准适用于出口东盟纺织品安全项目的抽查验证、风险监控、检验监管和指导企业组织生产。

FZ/T 44004-2018丝绸床上用品

本标准规定了丝绸床上用品的术语与定义、规格、要求、试验方法、检验规则、包装和标志。本标准适用于以蚕丝纯织、蚕丝与其他纱线交织、或与其他纤维混纺(蚕丝含量30%及以上)丝织物为面料加工制成的丝绸床上用品，不包括毯类、芯类、席类产品。本标准不适用于婴幼儿及儿童用品。

DIN EN 12586-2011儿童使用和保育用品.橡皮奶头固定器.安全性要求和试验方法.德文版本EN 12586-2007+A1-2011

This European Standard specifies safety requirements relating to the materials, construction, performance, packaging and labelling of soother holders. It includes test methods for the mechanical and chemical requirements specified. All products that are intended to connect a soother for babies and young children with any other product are included in the scope of this European Standard. This European Standard is intended to provide safety requirements for soother holders which are generally comprised of a strap with the holder at one end which retains the soother whilst the other end has a clasp that attaches to the child's garment. Where a soother holder has been classified as a toy or considered to have significant play value then the soother holder will have to meet the essential safety requirements for toys as stated in the Toy Directive (88/378/EEC) in addition to those in this European Standard. The addition of decorations or providing animal shaped fasteners should not automatically make the soother holder a toy; however the addition of a toy component to the soother holder will require that both the soother holder and the toy meet the essential safety requirements as stated in the Toy Directive. Where there is doubt concerning classification of a soother holder as a toy then advice should be sought from an EU Toy Notified Body or the Member State's Competent Authority for toys (see B.2).

BS EN 12586-2007+A1-2011儿童使用和保育用品.安慰奶嘴夹.安全性要求和试验方法

This European Standard specifies safety requirements relating to the materials, construction, performance,packaging and labelling of soother holders (see B.1).It includes test methods for the mechanical and chemical requirements specified.All products that are intended to connect a soother for babies and young children with any other product areincluded in the scope of this European Standard.This European Standard is intended to provide safety requirements for soother holders which are generallycomprised of a strap with the holder at one end which retains the soother whilst the other end has a clasp thatattaches to the child’s garment.Where a soother holder has been classified as a toy or considered to have significant play value then thesoother holder will have to meet the essential safety requirements for toys as stated in the Toy Directive(88/378/EEC) in addition to those in this European Standard. The addition of decorations or providing animalshaped fasteners should not automatically make the soother holder a toy; however the addition of a toycomponent to the soother holder will require that both the soother holder and the toy meet the essential safetyrequirements as stated in the Toy Directive. Where there is doubt concerning classification of a soother holderas a toy then advice should be sought from an EU Toy Notified Body or the Member State’s CompetentAuthority for toys (see B.2).