土方工程和建筑工程机械检测

土方工程和建筑工程机械检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB 50603-2010钢铁企业总图运输设计规范

本规范适用于新建、扩建、改建的钢铁企业总图运输设计。

GB 50669-2011钢筋混凝土筒仓施工与质量验收规范

本规范适用于贮存散料，且平面形状为圆形或多边形的现浇钢筋混凝土筒仓、压缩空气混合粉料调匀仓的施工与质量验收。

GB/T 51068-2014煤炭工业露天矿机电设备修理设施设计规范

本规范适用于煤炭工业露天煤矿新建、改建及扩建机电设备修理设施工程的设计。

ISO 13766-2-2018土方工程和建筑工程机械. 带内部电源的机器的电磁兼容性(EMC). 第2部分: 功能安全的附加EMC要求

This document provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility (EMC) of earth-moving machinery, as defined in ISO 6165:2012, and of the following building construction machinery as classified in ISO/TR 12603:2010: — drilling and foundation equipment; — equipment used for the preparation, conveyance and compaction of concrete, mortar and processing reinforcement; — road construction and maintenance machinery and equipment. It deals with EMC requirements related to the functional safety of the machinery, its electrical/ electronic subassemblies (ESA) and of separate ESA. This document is relevant only to the safety-related parts of control systems (SRP/CS) as defined in ISO 13849-1:2015 using electrical/electronic components which meet design requirements equal to or greater than safety‑related performance level PL b as defined in ISO 13849-1:2015. It also deals with electrical and electronic components or separate ESA intended to be f

NF E58-048-2008土方机械.压实挖掘机的倾翻防护结构(TOPS).实验室试验和性能要求

La présente Norme européenne établit un moyen reproductible pour évaluer les caractéristiques de charge des structures de protection au basculement (TOPS) sous charges statiques et prescrit les critères de performance d'un échantillon représentatif dans ces conditions de charge.Elle est applicable aux TOPS des mini-pelles (telles que définies dans l'EN ISO 6165) à flèche pivotante ayant une masse en service (voir 3.14) de 1000 à 6000 kg.

DIN EN 15573-2009土方机械.道路交通循环的设计要求.英文版本DIN EN 15573-2009-09

This European Standard specifies the requirements for earth-moving machinery described in EN ISO 6165 [2],intended to travel on the road.This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising fromthe significant hazards, hazardous situations and events during on road travel of earth-moving machinery.This European Standard does not apply to earth-moving machinery with a width exceeding 3 metres (see4.2.5).This European Standard does not apply to earth-moving machinery on legs e.g. walking excavators.This European Standard does not cover the hazards relevant to non-riding and remote control earth-movingmachinery.This European Standard is not applicable to earth-moving machines manufactured before the publication dateof this European Standard by CEN.

DIN EN ISO 13766-2-2018土方工程和建筑工程机械. 带内部电源的机器的电磁兼容性(EMC). 第2部分: 功能安全的附加EMC要求(ISO 13766-2-2018); 德文版本EN ISO 13766-2-2018

This International Standard provides test methods and acceptance criteria for the evaluation of the electromagnetic compatibility of Building-, road-construction and earth moving machines as defined in ISO 6165 and ISO 8811 and covered by ISO/TC 127 respective ISO/TC 195. It deals with additionally EMC requirements under the aspect of Functional safety. General EMC-requirements under typical Surrounding conditions are covered in part 1 of ISO 13766. This standard is only relevant for functions of machines which have to fulfil requirements greater or equal SIL 1 as defined in ISO 15998 or greater or equal Performance Level b as defined in ISO 13849. Electrical and/or electronic component(s) or separate technical unit(s) intended to be fitted in construction machinery under the restriction of greater or equal SIL 1 or greater or equal Performance Level b - as applicable above - are also dealt with in this International Standard. The following electromagnetic disturbance phenomena are evaluated: - Radiated electromagnetic field by external sources; - Radiated electromagnetic field by sources located onboard (antenna inside/outside); - Magnetic fields; - Electrical field; - electrostatic discharge; - conducted and coupled electrical transients. Construction machinery can have DC and/or AC internal electrical power supply systems. Machines that are designed to be supplied by the \"Public Mains Network\" are specifically excluded.