厨具把手检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB 4706.1-2005家用和类似用途电器的安全第1部分;通用要求

本部分涉及单相器具额定电压不超过250V，其他器具额定电压不超过480V的家用和类似用途电器的安全。不作为一般家用，但对公众仍可能引起危险的器具，例如打算在商店、轻工业和农场中由非的人员使用的器具也属于本部分的范围。就实际情况而言，本部分所涉及的各种器具存在的普通危险，是在住宅和住宅周围环境中所有人可能会遇到的。然而，一般说来本部分并未涉及： --无人照看的幼儿和残疾人使用器具时的危险； --幼儿玩耍器具的情况。

GB 4706.21-2008家用和类似用途电器的安全.微波炉,包括组合型微波炉的特殊要求

GB 4706.1-2005中的该章由以下内容代替。本部分适用于额定电压不超过250V的家用微波炉的安全要求。本部分适用于组合型微波炉，具体要求见附录AA。就实际情况而言，本部分涉及的各种器具存在的普通危险，是在住宅和住宅周围环境中所有的人员可能会遇到的。本部分一般不考虑：——无人照看的幼儿的残疾人对器具的使用；——幼儿拿器具玩耍的情况。

GB 17988-2008食具消毒柜安全和卫生要求

GB 4706．1—2005的该章用下述内容代替：本标准适用于单相器具额定电压不超过250 V、其他器具额定电压不超过480 V家用和类似用途以电能作为主要能源的电热方式、臭氧方式、紫外线辐射(只能作为辅助)方式以及上述这几种消毒方式相互组合的食具消毒柜(以下简称消毒柜)。本标准不适用于以下消毒柜：——仅靠紫外线辐射方式消毒的消毒柜；——不以食具消毒为主要用途的其他消毒柜，如毛巾消毒柜等；——用于医疗用途的消毒柜。

QB/T 4404-2012电灶

本标准规定了家用和类似用途电灶的术语和定义、分类、要求、试验方法、检验规则、标志、包装、运输、贮存。本标准适用于在室内使用的单相器具额定电压不超过250 V,其他器具额定电压不超过480 V的家用和类似用途的电灶的灶台部分。本标准不适用于电灶的烤箱、烤架、烤盘及类似部分。本标准不适用于电磁灶。

SB/T 10607-2011箱式燃气食品烘炉

本标准规定了箱式燃气食品烘炉的产品分类、技术要求、试验方法、检验规则、标志、使用说明以及包装、运输与贮存。本标准适用于以燃气为能源，单台烘炉额定热负荷不小于5.9kW的商用箱式（分层）燃气食品烘炉。

JGJ 367-2015住宅室内装饰装修设计规范

本规范适用于住宅的室内装饰装修设计，不适用属于历史文物保护的住宅的室内装饰装修设计。

DIN EN ISO 12217-1-2016小型船舶.稳定性和浮力评估与分类.第1部分:船体长度不小于6m非帆艇(ISO 12217-1-2015).德文版本EN ISO 12217-1-2015

This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed. The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load. This part of ISO 12217 is principally applicable to boats propelled by human or mechanical power of 6 m up to 24 m hull length. However, it can also be applied to boats of under 6 m if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812. In relation to habitable multihulls, this part of ISO 12217 includes assessment of vulnerability to inversion, definition of viable means of escape and requirements for inverted flotation.

DIN EN ISO 12217-2-2016小型船舶.稳定性和浮力评估和分类.第2部分:船体长度不小于6m的帆船(ISO 12217-2-2015).德文版本EN ISO 12217-2-2015

This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed. The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum load. This part of ISO 12217 is applicable to boats propelled primarily by sail (even if fitted with an auxiliary engine) of 6 m up to and including 24 m hull length. However, it is also applied to boats of under 6 m if they are habitable multihulls or may be applied if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812. In relation to habitable multihulls, this part of ISO 12217 includes assessment of vulnerability to inversion, definition of viable means of escape and requirements for inverted flotation.