充气游乐设施检测

充气游乐设施检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB 8408-2018大型游乐设施安全规范

本标准规定了大型游乐设施(以下简称游乐设施)的总则、材料和紧固件、设计、制造与安装、使用管理与维护保养的基本安全要求。本标准适用于大型游乐设施。本标准不适用于竞技体育设施和健身设施。

GB/T 16662-2008建筑给水排水设备器材术语

本标准规定了建筑给水排水设备和器材，包括卫生器具，水嘴，加压、调节和贮存设备，加热贮热设备，地漏，检查井，建筑水处理设备，游泳池、游乐池设备，冷却设备，水景设备，雨水利用设备，管材，管件，阀门，计量、检测仪表等方面的专用术语。本标准适用于建筑给水排水设备和器材的专用术语。

GB/T 18166-2008架空游览车类游艺机通用技术条件

本标准规定了架空游览车类游艺机的通用技术条件和技术要求。本标准适用于架空游览车类游艺机的设计、制造、安装、改造、维修、试验、检验和使用管理。

GB/T 18168-2017水上游乐设施通用技术条件

本标准规定了水上游乐设施的术语和定义、技术要求、试验方法和检验规则。本标准适用于水滑梯、游乐池、互动戏水设施、峡谷漂流、游船等水上游乐设施。本标准不适用于6人以上乘坐并有专人操作的船类和充气式水滑梯。

GB 19402-2012客运地面缆车安全要求

本标准规定了客运地面缆车的设计、制造、安装、运行等方面的安全要求。本标准适用于营业性客运地面缆车。本标准不适用于非营业性地面缆车以及码头、矿山、井下用途的通勤缆车。

GB/T 20049-2006游乐设施代号

本标准规定了游乐设施的代号。 本标准规定的代号适用于供成人和儿童游乐及观光用的游乐设施，不适用于竞技体育设施及健身设施。

GB/T 20051-2006无动力类游乐设施技术条件

本标准规定了蹦极、滑素、儿童娱乐城、充气弹跳、系留式观光气球、空中飞人6种游乐设施的要求、试验方法。 本标准适用于上述6种游乐设施的设计、制造、安装、使用和检验等领域。

GB/T 20306-2017游乐设施术语

本标准界定了游乐设施的基本名词术语及其定义。本标准适用于游乐设施的生产、使用、检验、检测等领域。

GB/T 21268-2014非公路用旅游观光车通用技术条件

本标准规定了非公路用旅游观光车(以下简称观光车)的适用范围、术语定义、型号、基本参数、要求、试验方法、检验规则、标志、随车文件及附件、运输、贮存、质量保证期等。本标准适用于采用内燃机、电动机驱动或二者交替驱动的非公路用旅游观光车及观光列车(以下简称观光车)。其他同类型的车辆(如打猎车等)可参照执行。

GB 24727-2009非公路旅游观光车安全使用规范

本标准规定了非公路旅游观光车的安全使用规范，界定了观光车的术语和定义，给出了观光车安全维护、保养和修理的具体要求。本标准适用于采用内燃机、电动机驱动的观光车。其他同类型的车辆(如打猎车等低速电动车)亦可参照执行。

GB/T 27708-2011充气玩具通用技术要求

本标准规定了充气玩具的范围、规范性引用文件、术语和定义、要求、试验方法、缺陷分类及合格判定原则。本标准适用于预定供14岁以下儿童玩耍使用的充气玩具,包括儿童玩耍用气球、充气体育仿制玩具(如各类球)、充气造型玩具、充气承载玩具(如充气玩具家具)等。本标准不适用于充气水上玩具、室外充气游乐设施及预定用于节日庆祝、广告宣传、科学考察的气球。

GB/T 31257-2014蹦极通用技术条件

本标准规定了蹦极的设计、制造与安装、安全要求和试验方法。本标准适用于高空固定平台蹦极、弹射蹦极和小型蹦极。

GB/T 37219-2018充气式游乐设施安全规范

本标准规定了充气式游乐设施的安全要求、材料、试验方法、铭牌和产品使用维保说明书、使用和管理。本标准适用于3周岁至14周岁儿童游乐用的充气式游乐设施。本标准不适用于水上充气式游乐设施、涉水充气式游乐设施、充气玩具、充气建筑物、橡皮艇，以及用于广告、展览、杂技表演、安全、救援、航空和航天等用途的充气设施。

SL 398-2007水利水电工程施工通用安全技术规程

本标准规定了水利水电工程施工的通用安全技术要求。本标准适用于大中型水利水电工程施工安全技术管理、 安全防护与安全施工，小型水利水电工程可参照执行。

DL 5009.3-2013电力建设安全工作规程第3部分:变电站

本规程规定了变电站(含开关站、换流站)施工过程中为确保施工人员的生命安全和身体健康应遵守的安全施工要求和应采取的措施。本规程适用于新建、改建、扩建的交流1000kV及以下变电站、直流±800kV及以下换流站工程的施工。

BS 8409-2009全封闭游戏设施.实施规程

This British Standard gives recommendations for and guidance on supplier selection, safe operation and management of fully enclosed play facilities and associated buildings.NOTE The design and manufacture of equipment for play facilities is given in BS EN 1176.

BS EN 62267-2009轨道交通.都市自动化有轨运输(AUGT).安全要求

This International Standard covers high-level safety requirements applicable to automated urban guided transport systems, with driverless or unattended self-propelled trains, operating on an exclusive guideway.This standard only deals with the safety requirements needed to compensate for the absenceof a driver or attendant staff who would otherwise be responsible for some or all of train operation functions (see Table 1), depending on the level of automation of the system (see shaded areas in Table 1 and see 3.1 for a definition of the different grades of automation).The requirements of this standard are restricted to transports systems as defined in Clause 5 and to DTO and UTO as defined in 3.1.4 and 3.1.20, respectively (see the shaded areas in Table 1).Application of this standard is subsidiary to the responsibility of the transport authority and thesafety regulatory authority (see IEC 62278) and to the specific laws and decrees applicablewithin the prevailing environment (economic, social, political, etc.) where the transport system is located, taking into account:• social risk acceptance in different cultures or different national legal regulations (e.g.SHOREI, BOStrab) or principles (e.g. GAME, ALARP);• laws and decrees in different states;• special or different requirements specified by the safety regulatory authority or by an independent assessor in charge of the specific application;• the responsibility for ”safe operation“ by the transport authority.This standard does not apply to the following types of transport systems, unless specificallyrequired by the Transport Authority:• APMs (Automated People Movers) operating entirely inside a privileged environment suchas an airport, a commercial centre or a leisure resort;• amusement rides and roller-coasters, generally featuring a single station so thatpassengers board and alight the system at the same location;• intercity and mainline train services, generally operating in a rural environment on part oftheir routes;• cable-driven systems;• systems featuring electronically guided vehicles with optical sensors, magnetic sensors,or similar devices/systems.This standard is not concerned with risks arising during works for construction, installation,modification and dismantling of a system.This standard is not concerned with pre-existing DTO or UTO systems (see definitions in 3.1)that were designed before this standard took effect.In the case of upgrading an existing transport system to a DTO or UTO system, the risksassociated with the existing system are outside the scope of this standard. However, this standard and the risk analysis process described are relevant for the additional subsystems and possibly for the transition process itself. Therefore, the application of the standard is at the discretion of the safety regulatory authority.In the case of extending or modifying an existing DTO or UTO system in operation, this standard applies only if the change is significant as determined by the safety regulatory authority. However, the risks due to the relationship with the unchanged parts of existing systems (e.g. rolling stock, traction power supply, signalling and platforms) should be taken into account.

AS 3533.4.5-2017游乐设施和装置.特殊要求.水上充气装置

Specifies requirements and guidelines for the design, construction, operation and maintenance of waterborne inflatable equipment and facilities to promote safety for operating staff and patrons.