工业防护涂料中有害物质检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 30790.4-2014色漆和清漆防护涂料体系对钢结构的防腐蚀保护第4部分:表面类型和表面处理

GB/T 30790的本部分论述了以下类型的碳素钢或低合金钢的表面及其表面处理:--无涂层表面;--热喷涂锌、铝或其合金表面;--热浸镀锌表面;--电镀锌表面;--粉末镀锌表面;--涂覆预涂底漆表面;--其他已涂漆表面。本部分定义了许多表面处理等级,但是没有规定表面处理前对基材状况的要求。本部分不包括高抛光表面和加工硬化表面。

GB 30981-2020工业防护涂料中有害物质限量

本标准规定了工业防护涂料中对人体和环境有害的物质容许限量所涉及的产品分类、要求、测试方法、检验规则、包装标志、标准的实施。本标准适用于除腻子以外的对金属、混凝土、塑胶等表面进行防护的各类工业防护涂料(船舶涂料除外)。本标准不适用于航空航天涂料、核电涂料、军事装备和设施用涂料。

GB/T 31404-2015核电站海水循环系统防腐蚀作业技术规范

本标准规定了核电站海水循环系统防腐蚀作业的总则、涂层、阴极保护和监检测系统等技术要求。本标准适用于滨海核电厂海水循环系统的防腐蚀作业。

GB/T 31817-2015风力发电设施防护涂装技术规范

本标准规定了内陆和海上风电设施用防护涂层的技术条件，包括防护涂层的分类、要求、试验方法、检验规则、安全、卫生和环境保护、验收。本标准适用于内陆和海上风电设施防护涂层的初始涂装及修补涂装。

GB/T 33423-2016沿海及海上风电机组防腐技术规范

本标准规定了沿海及海上风电机组采用涂层和阴极保护联合防腐蚀的总则、涂层防护、阴极保护、腐蚀监检测系统。本标准适用于沿海及海上风电机组的塔筒、套管架、桩基及其他部件的防腐蚀作业。

GB/T 35602-2017绿色产品评价涂料

本标准规定了绿色涂料产品评价的术语和定义、产品分类、评价要求、评价方法等。本标准适用于水性涂料、粉末涂料、辐射固化涂料、高固体分涂料、无溶剂涂料等涂料产品的绿色产品评价。本标准不适用于防水涂料。

GB 51157-2016物流建筑设计规范

本规范适用于新建、扩建、改建的物流建筑设计。不适用于具有重大危险源的火药、炸药、化工品类的危险品物流建筑。

GB/T 51188-2016建筑与工业给水排水系统安全评价标准

本标准适用于新建、扩建、改建和既有建筑与工业的给水排水系统安全评价。本规范不适用于军工等特殊行业建筑与工业的给水排水系统安全评价。

HG/T 4755-2014聚硅氧烷涂料

本标准规定了聚硅氧烷涂料的要求，试验方法，检验规则以及标志、包装和贮存等内容。本标准适用于以含反应性官能团的聚硅氧烷树脂为主要成膜物，并加入适量的改性树脂、颜填料、助剂、溶剂等辅料，非多异氰酸酯同化的常温同化型钢结构表面用高耐久性面漆。聚硅氧烷涂料产品主要用于桥梁和机场及机车等交通设施、体育场馆和电视塔等公共设施、储罐和管道等石化设备、石油平台和风电塔架及港机等海上建筑以及其他钢结构表面的装饰和保护，也可用于混凝土结构、非铁材质的金属底材等其他表面。

HG/T 5367.1-2018轨道交通车辆用涂料第1部分:水性涂料

本部分规定了轨道交通车辆用水性涂料的术语和定义、要求、试验方法、检验规则以及标志、包装、贮存等内容。本部分适用于施涂于地铁、轻轨、有轨电车、普通列车和高速列车等轨道交通车辆表面的水性涂料，其涂层具有装饰和保护作用。

CJJ/T 110-2017建筑与小区管道直饮水系统技术规程

本规程适用于民用建筑与小区管道直饮水系统设计、施工、验收、运行维护和管理。

SY/T 7036-2016石油天然气站场管道及设备外防腐层技术规范

本规范适用于石油天然气站场下述工况条件的管道及设备外防腐层设计、施工及检验：1长期高运行温度为80℃的埋地非绝热钢质管道及设备。2长期运行温度为-35℃～400℃的埋地绝热钢质管道及设备。3长期运行温度为-35℃～400℃的地面钢质管道及设备。

JG/T 337-2011混凝土结构防护用渗透型涂料

本标准规定了混凝土结构防护用渗透型涂料的术语和定义、分类和标记、要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于混凝土结构防护用渗透型涂料。

TZ 203-2008客货共线铁路桥涵工程施工技术指南

本技术指南适用于旅客列车设计行车速度等于或小于200 km/h的客货共线标准轨距铁路桥涵工程的施工。

BS EN 14879-2-2006防止工业装置和设备受侵蚀物体腐蚀用有机涂覆系统和衬料.第2部分:金属构件涂层

This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to metallic process engineering equipment that will come in contact with chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. asagreed between the contract partners or been given by national regulations).The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes: to protect the component from adverse effects of aggressive substances; to protect waters (e.g. ground water) against hazardous substances; to protect the charge from becoming contaminated by components released from the substrate material; to achieve a particular surface properties.The described coatings are to be used for metallic process engineering equipment that will come in contactwith chemical substances. The different coating systems are: laminate coating systems which contain cold-curing resins; trowelled coating which contain cold-curing resins; sprayed coating systems which contain resins (in special cases, such coatings may also be applied bybrushing, rolling, flow coating, dipping, or by other means, such as providing sleeving for nozzles); powder coating systems which contain organic materials (powder coatings may be used as corrosion protectionor for non-stick purposes).For design and preparation of substrate see EN 14879-1.

BS EN 14879-3-2006防止侵蚀物体腐蚀工业装置和设备用有机涂层系统和衬料.第3部分:混凝土构件涂层

This European Standard specifies the requirements for and methods of testing of organic coatings which are applied to concrete process engineering equipment that will come in contact with aggressive chemical substances (liquids, solids and gases). The requirements specified here may be used for the purposes of quality control (e.g. as agreed between the contract partners).The standard does not cover coatings as in EN ISO 12944-1, but it does apply to coatings which serve one or more of the following purposes: to protect the component from damaging effects of aggressive substances; to protect waters (e.g. ground water) from harmful substances; to protect the charge from becoming contaminated by components released from the substrate material; to achieve a particular surface properties.The different coating systems are:a) impregnation, seals, thin coatings (applied by brushing, spraying or rolling);b) high-build coatings (applied by brushing, spraying, rolling, trowelling or pouring (self-levelling));c) laminate coatings;d) resinous screed;e) mastic asphalt screed with a waterproofing layer;f) combinations of the above coatings.Table 1 shows the coating methods to be employed for various types of concrete members.Handling of aggressive or water pollutant materials is understood to include:1) storage;2) filling;3) loading and unloading;4) manufacture;5) treatment;6) use.

BS EN 14879-4-2007防止工业装置和设备受侵入介质腐蚀的有机涂层系统和衬料.金属构件衬料

This document describes the requirements for and methods of testing of organic linings which are applied tometallic process engineering equipment that will come in contact with chemical substances. The requirementsspecified here may be used for the purposes of quality control (e.g. as agreed between the contractpartners1)).The standard applies to linings which serve one or more of the following purposes: to protect the component from adverse effects of aggressive substances; to protect waters (e.g. ground water) from harmful substances; to protect the charge from becoming contaminated by components released from the substrate material; to achieve a particular surface quality.This standard applies to vessels, apparatus, piping parts and other components for process plants made ofmetallic substrate materials which are in contact with media and are provided with a surface protection madeofa) prefabricated, natural or synthetic rubber based sheeting (subsequently named rubber lining), to beapplied in the workshop or on site;b) prefabricated, phenol formaldehyde or epoxy resin based sheeting (subsequently named duroplastic lining),to be applied in the workshop only;c) prefabricated, thermoplastic products (e.g. foils, sheeting, plates, pipes) (subsequently named thermoplasticlining), to be applied in the workshop or on site.The standard specifies the requirements, acceptance inspection, packaging, transport, storage and installationof organic linings for metallic materials.The tests described in this standard are intended for verification of the suitability of sheeting used for liningsand for acceptance inspection to be carried out on the products during or after application of the lining or aspart of routine inspections to determine any changes effected in the lining during service.

BS EN 14879-5-2007防止工业装置和设备受侵入介质腐蚀的有机涂层系统和衬料.混凝土构件衬料

This document describes the requirements for and methods of testing of organic linings which are applied toconcrete process engineering equipment that will come in contact with aggressive chemical substances(liquids, solids and gases). The requirements specified here may be used for the purposes of quality control(e.g. as agreed between the contract partners).The standard applies to linings which serve one or more of the following purposes: to protect the component from damaging effects of aggressive substances; to protect waters (e.g. ground water) from harmful substances; to protect the charge from becoming contaminated by components released from the substrate material; to achieve a particular surface quality.The different lining systems are:a) bonded linings;b) mechanically fixed linings;c) loose linings of sheeting material;d) loose linings of pre-formed pieces or lining units.Handling of aggressive or water pollutant materials is understood to includee) storage;f) filling;g) loading and unloading;h) manufacture;i) treatment;j) use.