卫生陶瓷釉料检测

卫生陶瓷釉料检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 23460.1-2009陶瓷釉料性能测试方法.第1部分:高温流动性测试.熔流法

GB/T 23460的本部分规定了陶瓷釉料高温流动性测试方法 熔流法。本部分适用于建筑卫生陶瓷及日用陶瓷釉料高温流动性的测试。本部分是一个相对的方法，依据本部分所得的试验结果，只有在试验釉与参比釉各项条件相同的情况下测试才具有可比性。

GB/T 29758-2013陶瓷用熔块

本标准规定了陶瓷用熔块的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于陶瓷用熔块。

JC/T 1046.1-2007建筑卫生陶瓷用色釉料 第1部分:建筑卫生陶瓷用釉料

本标准规定了建筑陶瓷卫生陶瓷用釉料的术语、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于建筑卫生陶瓷用釉料与熔块。

JC/T 2793-2023球黏土

本文件规定了球黏土的分类、要求、试验方法、检验规则、标志、包装、运输与贮存。\r本文件适用于建筑陶瓷、电瓷、日用陶瓷、卫生陶瓷、耐火材料、陶瓷釉料用天然球黏土和复合球黏土理化性能的测定。其他工业用球黏土也可参照使用。

ASTM C242-2001卫生陶瓷和相关制品的标准术语

1.1 This terminology pertains to the terminology used in ceramic whitewares and related products. 1.2 Words adequately defined in standard dictionaries are not included. Included are words that are peculiar to this industry. Double words, hyphenated words, or phrases are listed alphabetically under the first word; additional important words are cross-referenced. 1.3 For definitions of terms relating to surface imperfections on ceramics, refer to Terminology F109.

ASTM C1023-2010陶瓷艺术材料的慢性健康危害标识的标准实施规程

1.1 This practice describes a procedure for developing precautionary labels for ceramic art materials and provides hazard and precautionary statements based upon knowledge that exists in the scientific and medical communities. This practice concerns those chronic adverse health hazards known to be associated with a product or product component(s), when the component(s) is present in a physical form, volume, or concentration that in the opinion of a toxicologist has the potential to produce a chronic adverse health effect(s). 1.2 This practice is intended to apply exclusively to ceramic art materials which are packaged in sizes intended for use by artists or crafts people, either individually, or in a small group or class. 1.3 This practice applies to developing precautionary labeling for ceramic art materials intended for adult usage. Conformance to this practice does not imply that ceramic art materials will necessarily be labeled adequately or safe for use by children. Labeling determinations should consider reasonably foreseeable use or misuse by children and include as appropriate, in such instances, warnings to keep out of reach, or other specific precautionary statements. The responsibility for precautionary labeling rests with the ceramic producer or repackager who markets the material for art or craft use. 1.4 This practice does not specify test methods for determining whether a substance or product presents chronic adverse health hazards. 1.5 This practice does not apply to products appropriately labeled for known chronic adverse health hazards according to chemical substances labeling standards and practices, such as another national consensus standard, existing labeling statutes, regulations, or guidelines. 1.6 Since knowledge about chronic adverse health hazards is incomplete and warning cannot cover all uses of any product, it is not possible for precautionary labeling to assure completely safe use of an art product. 1.7 Manufacturers or repackagers may wish to determine individually or collectively precautionary labeling for ceramic art materials in accordance with this practice. Compliance may be certified by a certifying organization. Guidelines for a certifying organization are given in Appendix X1. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM C1023-2010(2014)陶瓷艺术材料的慢性不良健康危害贴标的标准实践规程

1.1x00a0;This practice describes a procedure for developing precautionary labels for ceramic art materials and provides hazard and precautionary statements based upon knowledge that exists in the scientific and medical communities. This practice concerns those chronic adverse health hazards known to be associated with a product or product component(s), when the component(s) is present in a physical form, volume, or concentration that in the opinion of a toxicologist has the potential to produce a chronic adverse health effect(s). 1.2x00a0;This practice is intended to apply exclusively to ceramic art materials which are packaged in sizes intended for use by artists or crafts people, either individually, or in a small group or class. 1.3x00a0;This practice applies to developing precautionary labeling for ceramic art materials intended for adult usage. Conformance to this practice does not imply that ceramic art materials will necessarily be labeled adequately or safe for use by children. Labeling determinations should consider reasonably foreseeable use or misuse by children and include as appropriate, in such instances, warnings to keep out of reach, or other specific precautionary statements. The responsibility for precautionary labeling rests with the ceramic producer or repackager who markets the material for art or craft use. 1.4x00a0;This practice does not specify test methods for determining whether a substance or product presents chronic adverse health hazards. 1.5x00a0;This practice does not apply to products appropriately labeled for known chronic adverse health hazards according to chemical substances labeling standards and practices, such as another national consensus standard, existing labeling statutes, regulations, or guidelines. 1.6x00a0;Since knowledge about chronic adverse health hazards is incomplete and warning cannot cover all uses of any product, it is not possible for precautionary labeling to assure completely safe use of an art product. 1.7x00a0;Manufacturers or repackagers may wish to determine individually or collectively precautionary labeling for ceramic art materials in accordance with this practice. Compliance may be certified by a certifying organization. Guidelines for a certifying organization are given in Appendix X1. 1.8x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

CR 13695-1-2000包装材料.关于测量和验证四种重金属和其它危险物资存在于包装材料中并向环境释放的要求.第1部分:关于测量和验证四种重金属存在于包装材料中的要求

This part 1 of the report is related to the four heavy metals specified in Art. 11 of the Directive: lead, cadmium, chromium (VI) and mercury. A second part of this CEN-report is related to the need to assess other dangerous substances present in packaging.