自镇流灯及灯适配器检测

自镇流灯及灯适配器检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

UL 935-2001荧光灯镇流器

1.1 These requirements cover ballasts of the resistance, reactance, and electronic (high frequency) types for use with fluorescent lamps involving a potential of 2500 volts or less in accordance with the National Electrical Code, ANSI/NFPA 70.1.2 A fluorescent-lamp ballast may be determined by investigation to be acceptable for use, in a fixtureor other device, with electric-discharge lamps of other than the fluorescent type.1.3 Fluorescent self ballasted lamps and ballast adaptors are evaluated using the Standard forSelf-Ballasted Lamps and Lamp Adapters, UL 1993. The component ballast is evaluated to requirementsin this Standard.1.4 A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shockor injury to persons shall be evaluated using appropriate additional component and end-productrequirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.

UL 1574-2004道路照明系统

1.1 These requirements cover track lighting systems intended for permanent connection to sources of supply in commercial or residential ordinary locations in accordance with the National Electrical Code, NFPA 70. The track lighting systems covered by this standard are rated: a) 300 volts or less; b) 150 volts or less to ground; and c) 50 amperes or less. 1.2 Lighting track is intended to be permanently installed and permanently connected to a branch circuit not exceeding 277 volts, nominal to ground, and 50 amperes. 1.3 These requirements cover: a) Track networks consisting of track and connectors; b) Mono-, duo-, and multi-point canopies; c) Incandescent, fluorescent, and High Intensity Discharge (HID) luminaire assemblies intended to be electrically connected to and physically supported by the track in track networks and canopies; d) Mounting means for the track; and e) Accessories. 1.4 These requirements do not cover: a) Busways intended for lighting, receptacles, or other general-purpose adaptors covered by the Standard for Busways, UL 857, and intended for use in accordance with Article 364 of the National Electrical Code, NFPA 70; or b) Track lighting systems for marine use aboard a ship or boat. 1.5 Track lighting systems are not intended for use: a) In wet or damp locations; b) In installations where the track is concealed; c) In hazardous locations; d) Where subject to physical damage; e) Where the track is extended through walls or partitions of building structures; f) Where subject to corrosive vapors; or g) In storage battery rooms. 1.6 A track lighting luminaire assembly that uses a tungsten-halogen lamp, fluorescent lamp, or high-intensity-discharge lamp shall also comply with the applicable requirements from the Standard for Luminaires, UL 1598.

DIN EN 13032-1-2012灯和照明.灯和灯具光度数据的测量和表示.第1部分:测量和文件格式

This European Standard establishes general principles for the measurement of basic photometric data for lighting application purposes.It establishes the measurement criteria needed for the standardisation of basic photometric data and details of the CEN file format for electronic data transfer.This is part 1 of a multi part standard. Part 1 deals with the basic photometric measurement and file format. Other parts deal with lamps and luminaires data depending on the applications.

ANSI C78.5-2003荧光灯自镇流灯的性能指南

Specifies the performance requirements together with the test methods and conditions required to show compliance of self-ballasted compact fluorescent lamps up to 60 watts which are intended for domestic and similar general lighting