洗涤剂与有关产品检测

GB/T 4754-2017国民经济行业分类

本标准规定了全社会经济活动的分类与代码。本标准适用于在统计、计划、财政、税收、工商等宏观管理中，对经济活动的分类，并用于信息处理和信息交换。

GB/T 5296.1-2012消费品使用说明.第1部分：总则

GB 5296的本部分规定了消费品使用说明(以下简称使用说明)的编制原则和方法。本部分适用于：——消费品设计者、生产者、技术文件起草者或此类说明的其他编制者; ——制定消费品标准的技术委员会或组织。 本部分的原则和方法与特定的产品标准中涉及使用说明的具体要求同时使用。 本部分包括消费品使用说明的评价方法(参见附录A),作为检查使用说明内容完整性和评价使用说明编写质量的参照方法及依据。 附录A主要供从事评定工作的研究者、专家和消费品评测机构使用。它也有助于本章1.1中提到的本部分的使用对象和管理者。

GB/T 16898-1997难燃液压液使用导则

本标准对难燃液工作特性、优缺点以及选用难燃液应考虑的因素等提供了详尽的指南。规定了减少在难燃液使用中所引起困难应采取的措施，以及用不同的难燃液置换时必须采取的措施。 本标准还说明了使用难燃液的液压回路设置。

GB/T 17313-2009袋成型-充填-封口机通用技术条件

本标准规定了袋成型-充填-封口机的术语和定义、型号、型式与基本参数、要求、试验方法、检验规则、标志、包装、运输及贮存。本标准适用于采用柔性包装材料对粒状、粉状、半流体和流体等进行包装、能自动完成制袋、充填、封口、切断等包装过程、广泛应用于食品、医药、化工、日化、农产品等行业的包装。

CECS 327-2012集合管型特殊单立管排水系统技术规程

本规程适用于新建、扩建、改建的高层和多层民用建筑集合管型特殊单立管排水系统的设计、施工安装及工程验收。

CJJ/T 29-2010建筑排水塑料管道工程技术规程

本规程适用于建筑物高度不大于100m的新建、改建、扩建工业与民用建筑的生活排水、一般屋面雨水重力排水和家用空调机组的凝结水排水的塑料管道工程设计、施工及验收。本规程规定的建筑排水塑料管道包括由硬聚氯乙烯(PVC-U)材料、聚烯烃(PO)材料制成，或者由苯乙烯与聚氯乙烯共混等材料制成的塑料排水管道。

SB/T 10751-2012豆芽生产HACCP应用规范

本标准规定了豆芽生产企业建立和实施HACCP体系的总要求及文件要求、良好操作规范(GMP)、卫生标准操作程序(SSOP)、标准操作规程(SOP)、有害微生物检验和HACCP体系的建立规程方面的要求。本标准适用于豆芽生产企业HACCP体系的建立、实施和评价。

SJ/T 11666.1-2016制造执行系统(MES)规范 第1部分:模型和术语

SJ/T 11666的本部分规定了制造执行系统(MES)的范围、制造执行系统与业务管理系统之间的业务界面，同时界定了制造执行系统(以下简称MES)所使用的术语和定义。本部分适用于MES软件产品的设计、开发、选型和实施，可作为企业选择或评价MES系统时的评测依据。本部分的使用者包括独立软件测试机构、应用MES技术的组织、MES软件产品开发组织、MES实施及咨询服务机构等。与MES有关的其他领域亦可参照使用。

JGJ 159-2008古建筑修建工程施工与质量验收规范

本规范适用于下列工程的施工及验收:1古建筑修缮、移建(迁建)、重建(复建)工程。2仿古建筑的新建和修缮工程。3近、现代建筑中采用古建筑做法的新建和修缮项目。本规范不适用于依法核定作为文物保护的古建筑和近现代建筑物的修缮。

EN 13534-2006食品加工机械.食品加工填料机.安全和卫生要求.包含修改件A1-2010

This standard applies for curing injection machines with infeed and outfeed devices; curing injection machines with infeed and outfeed devices and loading devices.This standard does not apply to portable/hand guided curing injection devices.This document deals with all significant hazards, hazardous situations and events relevant to curing injection machinery when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).This document is not applicable to curing injection machines which are manufactured before the date of publication of this document by CEN.This standard covers the following types of curing injection machines: Curing injection machines consist mainly of a single or multilane curing needle station, holding down clamp, infeed and outfeed devices, machine frame and related drive system, and electrical, electronic, or pneumatic components, depending on machine type. Curing injection machines in the scope of this standard can be equipped with: infeed chute; splash guard flaps; single or multi-lane curing needle bars (needle station); holding down clamp; infeed and outfeed conveyor belt; infeed and outfeed rake; interlocked transport car at the outfeed side; loading device with delivery chute. The product being processed (raw meat, game or raw fish) is fed by hand to the infeed device of the curing injection machine. The infeed device transports the product to the needle station; the product is then pressed against the infeed device by a holding down clamp. The needles of the needle station inject the curing liquid or other fluids into the product. The outfeed device then transports the product away from the needle station.This standard also covers the loading devices, which can be necessary in the case of machines with high capacity and/or great height. Curing injection machines in the scope of this standard can be stationary or mobile. Curing injection machines with single or multi-lane curing needle bars, infeed and outfeed device at the infeed and outfeed side (see Figure 1).

DIN 18867-8-2016大型烹饪设备.车载烹饪设备.第8部分:脚轮，要求和试验

This standard covers castors for movable catering appliances in commercial enterprises as well as social facilities in care catering.

DIN EN 12566-1-201650PT及以下的小型废水处理系统.第1部分:预制的化粪池.德文版本EN 12566-1-2016

This European Standard specifies the requirements for prefabricated septic tanks and ancillary equipment used for the partial treatment of domestic wastewater for a population up to 50 PT. Pipe sizes, loads, watertightness, marking and quality control are specified. The following cases are excluded: - septic tanks receiving grey water only; - in situ constructed septic tanks.

DIN EN 13534-2011食品加工机械.固化注塑机.安全和卫生要求;德文版本EN 13534-2003+A1-2010

This standard applies for- curing injection machines with infeed and outfeed devices;- curing injection machines with infeed and outfeed devices and loading devices.This standard does not apply to portable/hand guided curing injection devices.

DIN EN 14395-1-2005有机材料对人类生活用水的影响.储水系统中水的感官评定.第1部分:试验方法

This standard specifies a test method for determining the organoleptic properties (odour, flavour, colour and turbidity) of test waters after their contact with products made from organic materials used in storage systems (tanks, reservoirs, ancillaries and their coatings both for factory and site applied products).

DIN EN 14976-2006纺织品.床垫布.规范和试验办法.德文版本 EN 14976-2005

This European Standard specifies properties, test methods (other than flammability) and minimumrequirements for ticking (woven, nonwoven or knitted), suitable for covering mattresses,divans and bed baseswhich are intended for residential (domestic) use, and for use in the public sector and contract markets.NOTE Some ountries have re9ulations on the fire behaviour of mattresses and mattress components. Theseregulations should be observed.

DIN EN ISO 4263-3-2016石油及相关产品.防腐蚀矿物油和液体老化性的测定.透平油稳定性(TOST)试验.第3部分:合成液压液的无水规程(ISO 4263-3-2015).德文版本EN ISO 4263-3-2015

This part of ISO 4263 specifies a method for the determination of the ageing behaviour of synthetic hydraulic fluids of categories HFDU, HEES, HEPG and HETG as defined, for example, in ISO 12922 and ISO 15380. The ageing is accelerated by the presence of oxygen and metal catalysts at elevated temperature, and the degradation of the fluid is followed by changes in acid number. Other parts of ISO 4263 specify similar procedures for the determination of ageing behaviour of mineral oils and specified categories of fire-resistant fluids used in hydraulic and other applications.

DIN EN ISO 4263-4-2006石油和相关产品.防腐蚀矿物油和液体老化性的测定.TOST试验.第4部分:工业齿轮油的程序(ISO 4263-4:2006)

This standard specifies a procedure for industrial gear oils for the determination of the ageing behaviour of inhibited oils and fluids.

DIN EN ISO 14046-2016环境管理.水足迹.原则,要求和指南(ISO 14046-2014).德文和英文版本EN ISO 14046-2016

This International Standard specifies principles, requirements and guidelines related to water footprint assessment of products, processes and organizations based on life cycle assessment (LCA). This International Standard provides principles, requirements and guidelines for conducting and reporting a water footprint assessment as a stand-alone assessment, or as part of a more comprehensive environmental assessment. Only air and soil emissions that impact water quality are included in the assessment, and not all air and soil emissions are included. The result of a water footprint assessment is a single value or a profile of impact indicator results. Whereas reporting is within the scope of this International Standard, communication of water footprint results, for example in the form of labels or declarations, is outside the scope of this International Standard. NOTE: Specific requirements and guidelines for organizations are given in Annex A.