文丘里式差压液体添加射流器检测
GB/T 5907.5-2015消防词汇 第5部分:消防产品
GB/T 5907的本部分界定了消防产品的常用术语和定义。本部分适用于消防管理、消防标准化、消防工程、消防科学研究、教学、咨询、出版及其他有关工作领域。
GB/T 16662-2008建筑给水排水设备器材术语
本标准规定了建筑给水排水设备和器材，包括卫生器具，水嘴，加压、调节和贮存设备，加热贮热设备，地漏，检查井，建筑水处理设备，游泳池、游乐池设备，冷却设备，水景设备，雨水利用设备，管材，管件，阀门，计量、检测仪表等方面的专用术语。本标准适用于建筑给水排水设备和器材的专用术语。
GB/T 21403-2008喷灌设备.文丘里式差压液体添加射流器
本标准规定了“文丘里式差压液体添加射流器”的设计、操作须知及测试方法。这种“文丘里式差压液体添加射流器”是灌溉系统中用来向系统注入可溶性化学物，包括液体肥料、水溶性液体肥料、酸类、腐蚀性溶液、杀虫剂、除草剂以及其他液态添加剂。本标准不含向饮用水供水系统中回流防止装置，接近文丘里式射流器的安装装置被包含在防水措施细则中。
GB/T 50155-2015供暖通风与空气调节术语标准
本标准适用于供暖通风与空气调节工程的设计、施工、验收、运行维护及科研、教学等。
SL 56-2013农村水利技术术语
本标准规定了以下领域的术语：灌溉、农田排水、村镇供水排水、泵站工程、灌溉排水建筑物、牧区水利、农村水土环境与生态、灌区管理、中国古代农田水利等有关技术术语。本标准适用于农田水利工程和农村饮水安全工程规划、设计、施工、管理与试验研究，农村水土环境保护与改善等。
ISO 15873-2002灌溉设备.差压文丘里式液态添加剂喷射器
本标准规定丁“文丘里式差压液体添加射流器”的设计、操作须知及测试方法。这种“文丘里式差压液体添加射流器”是灌溉系统中用来向系统注入可溶性化学物，包括液体肥料、水溶性液体肥料、酸类、腐蚀性溶液、杀虫剂、除草剂以及其他液态添加剂。本标准不含向饮用水供水系统中回流防止装置，接近文丘里式射流器的安装装置被包含在防水措施细则中。
EN ISO 17078-2-2007石油和天然气工业.钻井和生产设备.第2部分:偏心轴的流控制装置
This part of ISO 17078 provides requirements for subsurface flow-control devices used in side-pocket mandrels (hereafter called flow-control devices) intended for use in the worldwide petroleum and natural gas industry. This includes requirements for specifying, selecting, designing, manufacturing, quality-control, testing and preparation for shipping of flow-control devices. Additionally, it includes information regarding performance testing and calibration procedures.The installation and retrieval of flow-control devices is outside the scope of this part of ISO 17078. Additionally,this part of ISO 17078 is not applicable to flow-control devices used in ce
DIN EN ISO 772-2011液体比重测定法.词汇和符号(ISO 772-2011):三种语言版本EN ISO 772-2011
This International Standard gives terms, definitions and symbols used in standards in the field of hydrometry.
DIN EN ISO 13501-2011石油和天然气工业.钻井液.工艺设备的评定(ISO 13501-2011);英文版本EN ISO 13501-2011
This International Standard provides a standard procedure for assessing and modifying performance of solids control equipment systems commonly used in the field in petroleum and natural gas drilling fluids processing.
BS EN ISO 17078-2-2007石油和天然气工业.钻井和生产设备.偏心轴的流控制装置
This part of ISO 17078 provides requirements for subsurface flow-control devices used in side-pocketmandrels (hereafter called flow-control devices) intended for use in the worldwide petroleum and natural gasindustry. This includes requirements for specifying, selecting, designing, manufacturing, quality-control, testingand preparation for shipping of flow-control devices. Additionally, it includes information regardingperformance testing and calibration procedures.The installation and retrieval of flow-control devices is outside the scope of this part of ISO 17078. Additionally,this part of ISO 17078 is not applicable to flow-control devices used in centre-set mandrels or with tubingretrievableapplications.This part of ISO 17078 does not include requirements for side-pocket mandrels, running, pulling, and kickovertools, and latches that might or might not be covered in other ISO specifications. Reconditioning of usedflow-control devices is outside of the scope of this part of ISO 17078.
