成分分析 · 材料检测 · 食品检测 · 环境检测

专业检测知识科普,帮您选对检测方案

咨询工程师

与人体暴露于电磁场有关的照明设备的评估检测

发布时间:2024-06-21 作者:中析研究所 浏览:

GB/T 20850-2014机械安全 机械安全标准的理解和使用指南

本标准规定了机械安全各相关标准的提纲性内容。本标准可为机械及相关设备的设计者和制造商提供帮助,特别是在缺少特定C类标准的情况下,能帮助设计者和制造商正确理解相关的机械安全标准。

GB/T 31275-2020照明设备对人体电磁辐射的评价

本标准用于人体暴露于照明设备电磁辐射的评估。评价包括频率介于20 kHz~10 MHz之间的感应内部电场和照明设备周围频率介于100 kHz~300 MHz的比吸收率(SAR)。本标准适用于:——用于照明,以产生和/或分配光为主要功能,采用低电压供电或电池工作,供室内和/或室外使用的所有照明设备;——主要功能之一是照明的多功能设备中的照明设备;——专门与照明设备一起使用的独立辅助设备;——带有用于无线通信或控制的有意辐射体的照明设备。本标准不适用于:——飞机和机场用照明设备;——道路车辆用照明设备;(但用于公共交通中乘客车厢照明的照明设备除外)——农业用光照设备;——轮船/船舶用照明设备;——复印机、幻灯片投影仪;——电磁场要求在其他标准中有明确规定的设备。本标准不适用于灯具的内装式元件,如灯的电子控制装置。

GB 51204-2016建筑电气工程电磁兼容技术规范

本规范适用于新建、扩建和改建的民用建筑和一般工业建筑的电气工程电磁兼容的设计、施工、检测及验收。

JT/T 1079-2016船员职业健康和安全保护及事故预防

本标准规定了船舶上的船员职业健康和安全保护及事故预防中的基本要求、一般职责、安全委员会、培训和指导、事前事故预防、事中过程控制及事后调查处置。本标准适用于船员职业健康和安全保护及事故预防。

GSO IEC 62493-2016与人体暴露于电磁场有关的照明设备的评估

IEC 62493:2015 applies to the assessment of lighting equipment related to human exposure to electromagnetic fields. The assessment consists of the induced internal electric field for frequencies from 20 kHz to 10 MHz and the specific absorption rate (SAR) for frequencies from 100 kHz to 300 MHz around lighting equipment. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) identification of lighting product types deemed to comply with the standard without the need for test; b) deletion of the need for CISPR-15-compliance as a prerequisite for IEC 62493 compliance; c) inclusion of the consequences of the ICNIPR 2010 guidelines for (up to 100 kHz); d) adding some guidance to the Van der Hoofden test head method to improve reproducibility of results; e) inclusion of compliance demonstration method for products having intentional radiators.

DIN EN 14010-2009机械安全.汽车用动力驱动制动设备.设计,制造,安装和交付使用阶段的安全和电磁兼容性要求,德文版EN 14010:2003+A1:2009

1.1 This European Standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during installation1, operation and maintenance of permanently installed equipment and systems for the power driven parking of motor vehicles, as defined in 3.1 to 3.4 below. Requirements are also given on the provision of information for use, which includes requirements for the drafting of the instructions. Electromagnetic compatibility requirements are also covered. 1.2 This European Standard applies to equipment and systems for the power driven parking of motor vehicles which have four wheels, are within a maximum size envelope of 5,30 m long, by 2,30 m wide, by 2,20 m high and have a mass less than 2500 kg. The equipment can be manually or automatically controlled. 1.3 This standard does not cover: a) vehicle lifts (see EN 1493); b) peripheral devices, which do not handle motor vehicles, e.g. parking meters, ticket machines; c) requirements related to the building even if they support directly stored vehicles; d) goods only lifts in accordance with EN 81-31; e) power driven parking equipment intended for lifting and/or transporting any person; f) transmission and interface of remote controls; g) automatic parking equipment with transfer areas which move; h) the use of power driven parking equipment by wheelchair users and deaf persons; i) the workplace of any attendant. 1.4 This standard does not deal with the following: a) hazards arising if loads, or other items fall from vehicles; b) hazards arising if fuel or oil leaks from vehicles; c) hazards caused by operating the equipment/system in electromagnetic fields outside the range of EN 51000-6-2; d) hazards caused by operating the equipment/system in areas subject to special regulations (e.g. explosive atmospheres, fire risks); e) hazards caused by the use of dangerous/toxic materials, e.g. special hydraulic oil; f) hazards caused by noise; g) hazards arising from inadequate lighting of the surrounding of automatic parking systems and/or the place of installation of non-automatic parking equipment; h) hazards caused by earthquakes; i) hazards caused by vandalism; j) hazards due to the use of programmable electronic systems related to safety functions;k) hazards due to the use of cableless control devices;I) hazards arising due to collision caused by the driver of the vehicle.This document is not applicable to power driven parking equipment and systems manufactured before the date ofpublication of this document by CEN.

DS/EN 62493-2010与人体暴露于电磁场有关的照明设备的评估

IEC 62493:2009 applies to the assessment of lighting equipment related to human exposure to electromagnetic fields. The assessment consists of the induced current density for frequencies from 20 kHz to 10 MHz and the specific absorption rate (SAR) for frequencies from 100 kHz to 300 MHz around lighting equipment. This standard does not apply to built-in components for luminaires such as electronic control gear.

DS/IEC/TR 62493-1-2013与人体暴露于电磁场相关的照明设备的评估 - 第1部分:VDE测试认证机构与德国电气和电子制造商协会ZVEI的EMF测量活动结果

This part of the IEC 62493 series presents an overview on the EMF measurement results dependent of different lamp technologies used in current luminaires.For the measurement only the test procedure with the so called Van der Hoofden Head in the frequency

上一篇天然大理石荒材检测 下一篇弧面板检测

相关阅读

了解更多检测知识

道桥材料检测

道桥材料检测覆盖水泥、沥青、集料、钢筋及结构混凝土等对象,通过取样规范、力学试验、化学分析与无损检测等手段,测定强度、变形、耐久等关键指标。本文按样品制备、检测方法、指标测定到判定标准的步骤展开,说明各环节操作要点,并给出第三方检测机构的选择要素,可用于工程质量控制与验收参考。

2026-11-13 | [其他]

洗衣凝珠检测

洗衣凝珠检测围绕成分、性能与安全三大维度展开,涵盖取样规范、HPLC法测定活性物含量、表面活性剂鉴定与酶活分光光度法测定、去污力与溶解性能试验、微生物限量与重金属指标判定。本文按流程分述各检测方法与操作要点,供质量控制与委托检测参考。

2026-11-09 | [其他]

绿色食品检测

绿色食品检测覆盖农药残留、重金属、微生物限量及理化品质等维度。本文按样品制备、GC-MS农残测定、ICP-MS重金属测定、平板计数法微生物检验的顺序说明操作要点,并阐述灵敏度、回收率等方法验证指标与判定标准,适合标志申报与质量控制场景参考。

2026-11-07 | [其他]

吐鲁番葡萄检测

吐鲁番葡萄检测围绕样品采集制备、农药残留GC-MS与HPLC分析、糖度及营养成分分光光度测定、重金属与微生物联检等环节展开。检测依据食品安全国家标准中的限量要求判定,报告可用于收购分级、市场准入及地理标志产品核查,检测流程规范、结果可追溯。

2026-10-31 | [其他]

食品过敏原检测

食品过敏原检测覆盖样本制备、ELISA蛋白筛查、PCR基因成分鉴定及LC-MS/MS质谱确证等环节。检测针对乳、蛋、花生、坚果、麸质等常见致敏成分,以检出限、特异性、回收率等指标评价方法性能,判定结果用于交叉污染控制、标签标示与进出口合规管理。

2026-10-29 | [其他]

二硫化钼检测

二硫化钼检测围绕物相结构、微观形貌、粒度分布与化学纯度展开,常用X射线衍射鉴别2H与1T晶型及杂相,拉曼光谱判断层数与缺陷状态,扫描电镜观察颗粒形貌,激光粒度法测定粒径分布,ICP光谱定量杂质元素。本文按制样、表征、指标判定的流程介绍各方法操作要点与适用场景。

2026-10-29 | [其他]

我们的优势

选择中析研究所的八大理由

资质齐全

旗下实验室依法依规开展检测,报告科学公正,获监管与客户广泛认可。

设备先进

上千台精密仪器定期检定校准,量值溯源体系完善。

专家团队

多领域技术专家,十年以上经验,破解各类疑难检测。

标准覆盖广

覆盖GB、行标及ISO、ASTM等国际标准,可定制方案。

周期短

常规项目7-10个工作日出报告,流程标准高效。

加急服务

支持加急检测通道,助力客户快速完成质量把关。

一对一服务

工程师全程对接,需求沟通到报告解读全流程陪伴。

数据保密

严格保密制度,客户样品与检测数据安全无忧。

旗下实验室资质

我司旗下实验室具备CMA资质认定及CNAS认可,具体项目是否在资质认定/实验室认可范围内请与工程师确认。

CMA检验检测机构资质认定证书

CMA检验检测机构资质认定证书

CNAS实验室认可证书

CNAS实验室认可证书

ISO管理体系认证证书

ISO管理体系认证证书

高新技术企业证书

高新技术企业证书

中国分析测试协会会员单位

中国分析测试协会会员单位

中国质量协会会员证书

中国质量协会会员证书

AAA级信用企业证书

AAA级信用企业

绿色低碳诚信示范创建企业证书

绿色低碳诚信示范创建企业

仪器设备

1000余台精密设备 · 点击查看原图

气相色谱-质谱联用仪

气相色谱-质谱联用仪 GC-MS

复杂有机组分的定性鉴定与未知物剖析利器。

高效液相色谱仪

高效液相色谱仪 HPLC

食品添加剂、药品成分等热敏物质的精准检测。

电感耦合等离子体发射光谱仪

电感耦合等离子体发射光谱仪 ICP-OES

一次进样同时读出数十种金属元素含量。

傅里叶变换红外光谱仪

傅里叶变换红外光谱仪 FTIR

通过特征吸收峰快速判断材料种类与分子结构。

X射线荧光光谱仪

X射线荧光光谱仪 XRF

几分钟完成元素快检,且不损伤样品。

扫描电子显微镜

扫描电子显微镜 SEM

放大数十万倍观察表面微观结构,锁定失效根源。

液相色谱-质谱联用仪

液相色谱-质谱联用仪 LC-MS

农兽药残留等痕量物质的高灵敏确证检测。

气相色谱仪

气相色谱仪 GC

溶剂残留、香气成分等挥发性物质的专业检测。

在线工程师 一对一服务

检测需求不知从何入手?立即联系在线工程师,一对一解答检测疑问,免费获取检测方案与报价。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通