成分分析 · 材料检测 · 食品检测 · 环境检测

专业检测知识科普,帮您选对检测方案

咨询工程师

门协调装置检测

发布时间:2024-06-21 作者:中析研究所 浏览:

NF P26-320/A1-2003建筑五金.门协调装置.要求和检验方法

Le présent amendement a été préparé dans le but d'ajouter à la norme NF EN 1158, tous les éléments nécessaires pour que les dispositifs de sélection de vantaux isolés ou incorporés à un ferme-porte avec ou sans dispositif de retenue électromagnétique, destinés à être utilisés sur des portes de compartimentation du feu/fumées puissent être reconnus conformes à la Directive \"Produits de la Construction\" (89/106/CEE) et porter le marquage CE.

JS 10024-2007建筑构件.门协调装置.要求和试验方法

This standard specifies requirements for the following door coordinator devices for use on double leaf swing doors .

TS EN 1158-2004建筑五金件. 门协调装置. 要求和试验方法

This standard specifies requirements for the following door coordinator devices for use on double leaf sxing doors: - separately mounted door coordinator devcives; - Coordinator mechanisms incorporated in door closers; - coordinator mechanisms incorporated in door closers with electrically powered hold-open devices.\" =>Insert the following new paragrafp: \"Door clodsing decives are covered by EN 1154\". => Insert the following new paragraph: \"Electricaly powered hold-open decives are covered by EN 1155\".

TS EN 1158/A1/AC-2007建筑五金件. 门协调装置. 要求和试验方法

This standard specifies requirements for the following door coordinator devices for use on double leaf sxing doors: - separately mounted door coordinator devcives;

DIN EN 179-2008建筑附件.逃离线路用搬把式门拉手或逃生用锁(push pad)的紧急出口装置.要求和试验方法

This European Standard specifies requirements for the manufacture, performance and testing ofemergency exit devices mechanically operated by either a lever handle or a push pad for the purposeof achieving a safe exit under an emergency situation on escape routerThe suitability of an emergency exit device for use on smoke/fire-resisting door assemblies isdetermined by fire performance tests conducted in addition to the performance tests required by thisEuropean Standard. Annex B indicates additional requirements for these products.This European Standard covers emergency exit devices, which are either manufactured and placedon the market in their entirety by one producer, or produced by more than one producer andsubsequently placed on the market as a kit in a single transaction.

DIN EN 1125-2008建筑附件.逃离线路用水平杆控制的应急出口装置.要求和试验方法

This European Standard specifies requirements for the manufacture, performance and testing of panic exitdevices mechanically operated by either a horizontal push-bar or a horizontal touch-bar, specificallydesigned for use in a panic situation on escape routes.The suitability of a panic exit device for use on fire/smoke resisting door assemblies is determined by fireperformance tests conducted in addition to the performance tests required by this European Standard.Annex B indicates additional requirements for these products.This European Standard covers panic exit devices which are either manufactured and placed on themarket in their entirety by one producer or produced by more than one producer and subsequently placedon the market as a kit in a single transaction.

DIN EN 14846-2008建筑五金件.锁和插销.电机操作的锁和锁舌片.要求和试验方法

This European Standard specifies requirements and test methods for strength, security, durability andfunction of electrical and electronic components for all types of electromechanically operated locksand striking plates used on doors, window doors and entrance doors in buildings.Requirements relating to the purely mechanical feature of products included in this EuropeanStandard (e.g. resistance to drilling/side load) are covered by EN 12209.This European Standard covers electromechanically operated locks and striking plates which areeither manufactured and placed on the market in their entirety by one producer or assembled fromsub-assemblies produced by more than one producer and designed to be used in combination.This document is not applicable to electrically powered hold-open devices (EN 1155), electricallycontrolled panic exit systems (prEN 13633) or electrically controlled emergency exit systems(prEN 13637). It does not apply to purely magnetic locks, mechatronic or mechanical cylinders(EN 1303), handles (EN 1906), locks for windows, padlocks (EN 12320), locks for safes (EN 1300),furniture locks or prison locks, nor does it apply to cover operating and identification devices (such asmechanical cylinders, intelligent cards, digit codes, magnetic cards).This European Standard does not, for the time being, apply to electromagnetic door locks but thesedevices will be considered for inclusion in the first revision of this European Standard.

DIN EN 16034-2014行人门组, 工业, 商业, 车库门以及可开启窗户. 产品标准和性能特征. 耐火和/或烟雾控制特性; 德文版本EN 16034-2014

This European Standard identifies material independent, safety and performance requirements applicable to all fire resisting and/or smoke control products intended to be used in fire and/or smoke compartmentation and/or escape routes, which are either: - industrial, commercial and/or garage doorsets, rolling shutters or operable fabric curtains intended for the installation in areas in the reach of persons and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons or - rolling shutters or operable fabric curtains used in retail premises which are mainly provided for the access of persons rather than vehicles or goods or - pedestrian doorsets and/or openable windows and/or inspection hatches which are hinged or sliding, intended for the installation in areas in the reach of persons, and for which the main intended uses are giving safe access for persons and which are manually or power operated and: - opening and self closing as a normal mode of operation or - normally held open but self closing in case of fire or smoke or - normally maintained locked in the closed position (e. g. service access/inspection doorsets) and completed: - with building hardware, - with or without any side panel(s), flush over panel(s) and/or transom panel(s) (with or without glazing) and contained within a single perimeter frame for inclusion in a single aperture, - with or without any vision panel(s) in the door leaf or leave(s), - with or without any seals (e. g. for smoke control, fire resistance, draught, acoustic or weather characteristics).

BS EN 1158-1997建筑五金.门协调装置.要求和试验方法

This European Standard specifies requirements for the following door coordinator devices for use on double leaf swing doors:\n—separately mounted door coordinator devices;\n—coordinator mechanisms incorporated in door closers;\n—coordinator mechanisms incorporated in door closers with electrically powered hold-open devices.\nDoor coordinator devices are used where it is necessary to ensure the correct sequence of closing of double leaf swing doors, for example doors with rebated meeting stiles.\nDoor coordinator devices manufactured in accordance with this European Standard are recommended for use wherever there is a requirement for reliable sequential closing of double leaf swing fire/smoke doors incorporating rebated meeting stiles.\nDoor coordinator devices for use on fire/smoke doors need additional attributes in order to contribute actively to meeting the essential requirements of safety in case of fire, either independently or as part of a complete door assembly.\nThese additional requirements for door coordinator devices for use on a fire/smoke door assembly are specified in normative Annex A.\nDoor closing devices are covered by EN 1154.\nElectrically powered hold-open devices are covered by EN 1155.

BS EN 14846-2008建筑五金件 锁和插销 电动锁和冲击板要求和试验方法

This European Standard specifies requirements and test methods for strength, security, durability andfunction of electrical and electronic components for all types of electromechanically operated locksand striking plates used on doors, window doors and entrance doors in buildings.Requirements relating to the purely mechanical feature of products included in this EuropeanStandard (e.g. resistance to drilling/side load) are covered by EN 12209.This European Standard covers electromechanically operated locks and striking plates which areeither manufactured and placed on the market in their entirety by one producer or assembled fromsub-assemblies produced by more than one producer and designed to be used in combination.This document is not applicable to electrically powered hold-open devices (EN 1155), electricallycontrolled panic exit systems (prEN 13633) or electrically controlled emergency exit systems(prEN 13637). It does not apply to purely magnetic locks, mechatronic or mechanical cylinders(EN 1303), handles (EN 1906), locks for windows, padlocks (EN 12320), locks for safes (EN 1300),furniture locks or prison locks, nor does it apply to cover operating and identification devices (such asmechanical cylinders, intelligent cards, digit codes, magnetic cards).This European Standard does not, for the time being, apply to electromagnetic door locks but thesedevices will be considered for inclusion in the first revision of this European Standard.

上一篇滑动门和折叠门五金系统检测 下一篇窗扇平衡器检测

相关阅读

了解更多检测知识

道桥材料检测

道桥材料检测覆盖水泥、沥青、集料、钢筋及结构混凝土等对象,通过取样规范、力学试验、化学分析与无损检测等手段,测定强度、变形、耐久等关键指标。本文按样品制备、检测方法、指标测定到判定标准的步骤展开,说明各环节操作要点,并给出第三方检测机构的选择要素,可用于工程质量控制与验收参考。

2026-11-13 | [其他]

洗衣凝珠检测

洗衣凝珠检测围绕成分、性能与安全三大维度展开,涵盖取样规范、HPLC法测定活性物含量、表面活性剂鉴定与酶活分光光度法测定、去污力与溶解性能试验、微生物限量与重金属指标判定。本文按流程分述各检测方法与操作要点,供质量控制与委托检测参考。

2026-11-09 | [其他]

绿色食品检测

绿色食品检测覆盖农药残留、重金属、微生物限量及理化品质等维度。本文按样品制备、GC-MS农残测定、ICP-MS重金属测定、平板计数法微生物检验的顺序说明操作要点,并阐述灵敏度、回收率等方法验证指标与判定标准,适合标志申报与质量控制场景参考。

2026-11-07 | [其他]

吐鲁番葡萄检测

吐鲁番葡萄检测围绕样品采集制备、农药残留GC-MS与HPLC分析、糖度及营养成分分光光度测定、重金属与微生物联检等环节展开。检测依据食品安全国家标准中的限量要求判定,报告可用于收购分级、市场准入及地理标志产品核查,检测流程规范、结果可追溯。

2026-10-31 | [其他]

食品过敏原检测

食品过敏原检测覆盖样本制备、ELISA蛋白筛查、PCR基因成分鉴定及LC-MS/MS质谱确证等环节。检测针对乳、蛋、花生、坚果、麸质等常见致敏成分,以检出限、特异性、回收率等指标评价方法性能,判定结果用于交叉污染控制、标签标示与进出口合规管理。

2026-10-29 | [其他]

二硫化钼检测

二硫化钼检测围绕物相结构、微观形貌、粒度分布与化学纯度展开,常用X射线衍射鉴别2H与1T晶型及杂相,拉曼光谱判断层数与缺陷状态,扫描电镜观察颗粒形貌,激光粒度法测定粒径分布,ICP光谱定量杂质元素。本文按制样、表征、指标判定的流程介绍各方法操作要点与适用场景。

2026-10-29 | [其他]

我们的优势

选择中析研究所的八大理由

资质齐全

旗下实验室依法依规开展检测,报告科学公正,获监管与客户广泛认可。

设备先进

上千台精密仪器定期检定校准,量值溯源体系完善。

专家团队

多领域技术专家,十年以上经验,破解各类疑难检测。

标准覆盖广

覆盖GB、行标及ISO、ASTM等国际标准,可定制方案。

周期短

常规项目7-10个工作日出报告,流程标准高效。

加急服务

支持加急检测通道,助力客户快速完成质量把关。

一对一服务

工程师全程对接,需求沟通到报告解读全流程陪伴。

数据保密

严格保密制度,客户样品与检测数据安全无忧。

旗下实验室资质

我司旗下实验室具备CMA资质认定及CNAS认可,具体项目是否在资质认定/实验室认可范围内请与工程师确认。

CMA检验检测机构资质认定证书

CMA检验检测机构资质认定证书

CNAS实验室认可证书

CNAS实验室认可证书

ISO管理体系认证证书

ISO管理体系认证证书

高新技术企业证书

高新技术企业证书

中国分析测试协会会员单位

中国分析测试协会会员单位

中国质量协会会员证书

中国质量协会会员证书

AAA级信用企业证书

AAA级信用企业

绿色低碳诚信示范创建企业证书

绿色低碳诚信示范创建企业

仪器设备

1000余台精密设备 · 点击查看原图

气相色谱-质谱联用仪

气相色谱-质谱联用仪 GC-MS

复杂有机组分的定性鉴定与未知物剖析利器。

高效液相色谱仪

高效液相色谱仪 HPLC

食品添加剂、药品成分等热敏物质的精准检测。

电感耦合等离子体发射光谱仪

电感耦合等离子体发射光谱仪 ICP-OES

一次进样同时读出数十种金属元素含量。

傅里叶变换红外光谱仪

傅里叶变换红外光谱仪 FTIR

通过特征吸收峰快速判断材料种类与分子结构。

X射线荧光光谱仪

X射线荧光光谱仪 XRF

几分钟完成元素快检,且不损伤样品。

扫描电子显微镜

扫描电子显微镜 SEM

放大数十万倍观察表面微观结构,锁定失效根源。

液相色谱-质谱联用仪

液相色谱-质谱联用仪 LC-MS

农兽药残留等痕量物质的高灵敏确证检测。

气相色谱仪

气相色谱仪 GC

溶剂残留、香气成分等挥发性物质的专业检测。

在线工程师 一对一服务

检测需求不知从何入手?立即联系在线工程师,一对一解答检测疑问,免费获取检测方案与报价。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通