成分分析 · 材料检测 · 食品检测 · 环境检测

专业检测知识科普,帮您选对检测方案

咨询工程师

EN插头检测

发布时间:2024-06-21 作者:中析研究所 浏览:

EN 2591-419-2001航空航天系列.光电连接元件的试验方法.第419部分:插头接点嵌入的稳定性

This standard specifies a method of deteringThe stability in insert of male contacts used in elements of electrical and optical connection It shall be used together with EN 2591-100

EN 2997-008-2006航空航天系列.工作温度为-65℃~175℃,200℃,高达260℃耐火或非耐火螺纹环连接的圆形电连接器.第008部分:插头.产品标准-1997

This standard specifies the characteristics of plugs in the family of circular electrical connectors coupled by threaded ring.It applies to the class defined in Table 2.For contacts, filler plugs and rear accessories associated with this plug, see EN 2997-002. For receptacles and protective covers, see EN 2997-003 to EN 2997-007 and EN 2997-010 respectively.

EN 2997-010-2014航空航天系列.接器,电气,圆弧,螺纹环连接的,耐火或非耐火的,操作温度为65 °C 到 175 °C 到200 °C 到 260 °C 为大值.第010部分:插头产品保护罩的标准

This European Standard specifies the characteristics of protective covers for plugs in the family of circular electrical connectors coupled by threaded ring. It applies to the class defined in Table 2. For plugs associated with these protective covers, see EN 2997-008.

EN 2997-016-2010航空航天系列.连续使用温度-65℃至175℃,200℃,高达260℃用螺纹环连接耐火或非耐火的圆形电连接器.第016部分:带综合配件的插头.产品标准

This European Standard specifies the characteristics of plugs with integrated accessory in the family of circular electrical connectors coupled by threaded ring. It applies to the class defined in Table 2. For contacts, filler plugs associated withThis plug, see EN 2997-002. For receptacles, see EN 2997-003 to EN 2997-007, EN 2997-014, EN 2997-015 and for protective covers, see EN 2997-010.

EN 3155-008-2005航空航天系列.连接部件中用电连接器.第008部分:S级,A型,压紧,电连接器插头.产品标准

This standard specifies the required characteristics, tests and tooling applicable to male electrical contacts 008, type A, crimp, class S, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated female contacts are defined in EN 3155-003 and EN 3155-009.

EN 3155-012-2006航空航天系列.用于连接部件的电连接器.第012部分:R级,焊接,D型,尺寸8,三轴插头电连接器.产品标准

This standard specifies the required characteristics and tests applicable to size 8, male triaxial electrical contacts 012, type D, solder, class R, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated female contacts are defined in EN 3155-011 and EN 3155-013.

EN 3155-014-2006航空航天系列.用于连接部件的电连接器.第014部分:A型,压接,S级插头电连结器.产品标准

This standard specifies the required characteristics, tests and tooling applicable to male electrical contacts 014,type A, crimp, class S, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated female contacts are defined in EN 3155-015.

EN 3155-016-2006航空航天系列.用于连接部件的电连接器.第016部分:S级,压接,A型电接触器插头的产品标准

This standard specifies the required characteristics, tests and tooling applicable to male electrical contacts,type A, crimp, class S, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The tests as applied in this standard do not permit the full qualification and shall be completed with associated components.

EN 3155-018-2005航空航天系列.用于连接部件的电连接器.第018部分:S级,压接,A型电连接器插头.产品标准

This standard specifies the required characteristics, tests and tooling applicable to male contacts 018, type A,crimp, class S, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated female contacts are defined in EN 3155-019.

EN 3155-022-2006航空航天系列.用于连接部件的电连接器.第022部分:R级,压接,A型,矩形插头电触点.产品标准

This standard specifies the required characteristics, tests and tooling applicable to rectangular male contacts 022, type A, crimp, class R, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated female contacts are defined in EN 3155-023. They also mate with the female non-removable size 22 solder contacts of EN 3218-005 and EN 3218-006.

EN 3155-024-2006航空航天系列.用于连接部件的电连接器.第024部分:S级,压接,D型,尺寸为8,三轴电接触器插头的产品标准

This standard specifies the required characteristics and tests applicable to male electrical contacts, type D,crimp, class S, – 65 °C to 200 °C, size 8 used in elements of connection according to EN 3155-001. It shall be used together with EN 3155-001.The associated female contacts are defined in EN 3155-025.

EN 3155-028-2006航空航天系列.连接元件用电连接器.第028部分:R级,压接,D型,尺寸为16,屏蔽的同轴电连接器插头.产品标准

This standard specifies the required characteristics, tests and tooling applicable to male electrical coaxial contacts, shielded, size 16, type D, crimp, class R, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated female contacts are defined in EN 3155-029 and EN 3155-039.

EN 3155-030-2006航空航天系列.部件连接用电触点.第030部分:R级,压接,D型,插头, 尺寸12的同轴屏蔽电触点.产品标准

This standard specifies the required characteristics, tests and tooling applicable to male electrical coaxial contacts, shielded, size 12, type D, crimp, class R, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated female contacts are defined in EN 3155-031 and EN 3155-041.

EN 3155-042-2006航空航天系列.用于连接部件的电接触器.第042部分:P级,焊接,D型,042插头,尺寸08mm三轴电连接器.产品标准

This standard specifies the required characteristics and tests applicable to male triaxial contacts 042, size 08,type D, solder, class P, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated female contacts are defined in EN 3155-043.These contacts are derived from and are interchangeable with those of standard AS 39029/96.

EN 3155-046-2007航空航天系列.用于连接部件的电接触器.第046部分:S级双压接A型插头电连接器.产品标准

This standard specifies the required characteristics, tests and tooling, applicable to male electrical contacts 046, type A, double crimping, class S, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated female contact is defined in EN 3155-047.

EN 3155-054-2006航空航天系列.用于连接部件的电接触器.第054部分:T级,压褶,C型,NiAl热电偶电接触器插头.产品标准

This standard specifies the required characteristics, tests and tooling applicable to male electrical contacts,thermocouple, NiAl, type C, crimp, class T, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated female contacts are defined in EN 3155-055.

EN 3155-056-2006航空航天系列.用于连接部件的电接触器.第056部分:T级,压褶,C型,NiCr热电偶电接触器插头.产品标准

This standard specifies the required characteristics, tests and tooling applicable to male electrical contacts,thermocouple, NiCr, type C, crimp, class T, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated female contacts are defined in EN 3155-057.

EN 3155-058-2006航空航天系列.用于连接部件的电接触器.第058部分:R级,焊接,D型,尺寸为16,同轴电接触器插头.产品标准

This standard specifies the required characteristics, tests and tooling applicable to size 16, male coaxial,electrical contacts, type D, solder, class R, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated male contacts are defined in EN 3155-059 and EN 3155-069.

EN 3155-060-2006航空航天系列.用于连接部件的电接触器.第060部分:R级,钎焊,D型,插头,尺寸12,同轴电接触器插头.产品标准

This standard specifies the required characteristics, tests and tooling applicable to size 12, male coaxial,electrical contacts, type D, solder, class R, used in elements of connection according to EN 3155-002.It shall be used together with EN 3155-001.The associated female contacts are defined in EN 3155-061.

EN 3155-063-2009航空航天系列.用于连接部件的电连接器.第063部分:软焊R级D类尺寸为1,50欧的电气同轴插头连接器.产品标准

This standard specifies the required characteristics; tests and tooling applicable to male electrical coaxial contacts; size 1; type D; class R; used in elements of connection according to EN 3155-002. It is intended to be used together with EN 3155-001. The associated female contacts are defined in EN 3155-064.

上一篇材料和表面处理检测 下一篇力臂平衡装置检测

相关阅读

了解更多检测知识

道桥材料检测

道桥材料检测覆盖水泥、沥青、集料、钢筋及结构混凝土等对象,通过取样规范、力学试验、化学分析与无损检测等手段,测定强度、变形、耐久等关键指标。本文按样品制备、检测方法、指标测定到判定标准的步骤展开,说明各环节操作要点,并给出第三方检测机构的选择要素,可用于工程质量控制与验收参考。

2026-11-13 | [其他]

洗衣凝珠检测

洗衣凝珠检测围绕成分、性能与安全三大维度展开,涵盖取样规范、HPLC法测定活性物含量、表面活性剂鉴定与酶活分光光度法测定、去污力与溶解性能试验、微生物限量与重金属指标判定。本文按流程分述各检测方法与操作要点,供质量控制与委托检测参考。

2026-11-09 | [其他]

绿色食品检测

绿色食品检测覆盖农药残留、重金属、微生物限量及理化品质等维度。本文按样品制备、GC-MS农残测定、ICP-MS重金属测定、平板计数法微生物检验的顺序说明操作要点,并阐述灵敏度、回收率等方法验证指标与判定标准,适合标志申报与质量控制场景参考。

2026-11-07 | [其他]

吐鲁番葡萄检测

吐鲁番葡萄检测围绕样品采集制备、农药残留GC-MS与HPLC分析、糖度及营养成分分光光度测定、重金属与微生物联检等环节展开。检测依据食品安全国家标准中的限量要求判定,报告可用于收购分级、市场准入及地理标志产品核查,检测流程规范、结果可追溯。

2026-10-31 | [其他]

食品过敏原检测

食品过敏原检测覆盖样本制备、ELISA蛋白筛查、PCR基因成分鉴定及LC-MS/MS质谱确证等环节。检测针对乳、蛋、花生、坚果、麸质等常见致敏成分,以检出限、特异性、回收率等指标评价方法性能,判定结果用于交叉污染控制、标签标示与进出口合规管理。

2026-10-29 | [其他]

二硫化钼检测

二硫化钼检测围绕物相结构、微观形貌、粒度分布与化学纯度展开,常用X射线衍射鉴别2H与1T晶型及杂相,拉曼光谱判断层数与缺陷状态,扫描电镜观察颗粒形貌,激光粒度法测定粒径分布,ICP光谱定量杂质元素。本文按制样、表征、指标判定的流程介绍各方法操作要点与适用场景。

2026-10-29 | [其他]

我们的优势

选择中析研究所的八大理由

资质齐全

旗下实验室依法依规开展检测,报告科学公正,获监管与客户广泛认可。

设备先进

上千台精密仪器定期检定校准,量值溯源体系完善。

专家团队

多领域技术专家,十年以上经验,破解各类疑难检测。

标准覆盖广

覆盖GB、行标及ISO、ASTM等国际标准,可定制方案。

周期短

常规项目7-10个工作日出报告,流程标准高效。

加急服务

支持加急检测通道,助力客户快速完成质量把关。

一对一服务

工程师全程对接,需求沟通到报告解读全流程陪伴。

数据保密

严格保密制度,客户样品与检测数据安全无忧。

旗下实验室资质

我司旗下实验室具备CMA资质认定及CNAS认可,具体项目是否在资质认定/实验室认可范围内请与工程师确认。

CMA检验检测机构资质认定证书

CMA检验检测机构资质认定证书

CNAS实验室认可证书

CNAS实验室认可证书

ISO管理体系认证证书

ISO管理体系认证证书

高新技术企业证书

高新技术企业证书

中国分析测试协会会员单位

中国分析测试协会会员单位

中国质量协会会员证书

中国质量协会会员证书

AAA级信用企业证书

AAA级信用企业

绿色低碳诚信示范创建企业证书

绿色低碳诚信示范创建企业

仪器设备

1000余台精密设备 · 点击查看原图

气相色谱-质谱联用仪

气相色谱-质谱联用仪 GC-MS

复杂有机组分的定性鉴定与未知物剖析利器。

高效液相色谱仪

高效液相色谱仪 HPLC

食品添加剂、药品成分等热敏物质的精准检测。

电感耦合等离子体发射光谱仪

电感耦合等离子体发射光谱仪 ICP-OES

一次进样同时读出数十种金属元素含量。

傅里叶变换红外光谱仪

傅里叶变换红外光谱仪 FTIR

通过特征吸收峰快速判断材料种类与分子结构。

X射线荧光光谱仪

X射线荧光光谱仪 XRF

几分钟完成元素快检,且不损伤样品。

扫描电子显微镜

扫描电子显微镜 SEM

放大数十万倍观察表面微观结构,锁定失效根源。

液相色谱-质谱联用仪

液相色谱-质谱联用仪 LC-MS

农兽药残留等痕量物质的高灵敏确证检测。

气相色谱仪

气相色谱仪 GC

溶剂残留、香气成分等挥发性物质的专业检测。

在线工程师 一对一服务

检测需求不知从何入手?立即联系在线工程师,一对一解答检测疑问,免费获取检测方案与报价。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通