清洗剂挥发性有机化合物含量检测
GB/T 5206-2015色漆和清漆 术语和定义
本标准界定了涂料领域（色漆、清漆和色漆与清漆用原材料）使用的术语。与特定应用和性能（如防腐蚀保护、粉末涂料）有关的术语将在与之相关的标准中加以解释。本标准中的纳米技术相关术语与ISO/TS 80004-4标准相统一。
GB/T 35490-2017预应力钢筒混凝土管防腐蚀技术
本标准规定了预应力钢筒混凝土管(以下简称PCCP)防腐蚀技术的术语和定义，防腐蚀涂料的材料分类、要求和试验方法，涂装施工、质量控制和验收，管理和维修，安全、卫生和环境保护。本标准适用于新建的PCCP的表面防腐蚀涂覆工程，预应力混凝土管的表面防腐蚀涂覆工程和PCCP的防腐维修也可参照使用。
GB 36246-2018中小学合成材料面层运动场地
本标准规定了中小学合成材料面层运动场地的术语和定义、分类、技术要求、试验方法、取样要求及检验规则。本标准适用于中小学校新建、改建和扩建的室外合成材料面层运动场地的设计、选材、铺装、检测与验收。
GB 38508-2020清洗剂挥发性有机化合物含量限值
本标准规定了清洗剂的产品分类、挥发性有机化合物(VOC)的限值要求、检验方法和包装标志。本标准适用于工业生产和服务活动中生产、使用的含挥发性有机化合物的清洗剂。本标准不适用于航空航天、核工业、军工、半导体(含集成电路)制造用清洗剂。
JC/T 2334-2015陶瓷雕刻砖
本标准规定了陶瓷雕刻砖的术语和定义、分类和标记、一般要求、技术要求、试验方法、检验规则、标志、产品使用说明书以及包装、运输和贮存。本标准适用于装饰目的的陶瓷雕刻砖。
DIN EN 1010-2-2011机械安全性.打印机和纸加工机的设计和构造的安全性要求.第2部分:包括预压机械的印刷机和涂漆机;德文版本EN 1010-2-2006+A1-2010
This document applies to: Pre-press machinery (machinery and devices for the production of master copies and printing forms): - exposure equipment for the production of films and printing forms; - equipment for developing films and printing forms; - washing machines for printing forms; - machines for bending printing forms; - punching machines for film and printing forms; - cutting machines for film and printing forms; - machines for the production of gravure printing forms; - scanners. Printing and varnishing machines: - proofing presses; - sheet-fed printing presses and varnishing machines including digital printing presses; - web-fed rotary presses and varnishing machines including digital printing presses; - screen printing presses. Auxiliary devices: - cylinder and roller washing devices; - continuous flow drying devices; - powder spraying devices; - auxiliary devices on inking and damping units; - automatic plate clamping devices; - washing equipment for printing forms, rollers and scrapers; - pile turners; - measuring and control devices. This document shall be used together with EN 1010-1:2004+A1. Both parts together identify all significant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in prEN 1010-2 take precedence over respecti¬ve requirements in this standard. This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004+A1. This document does not apply to high-pressure cleaning devices and screen printing presses for textile substrates. This document is not applicable to printing and varnishing machines including pre-press machinery which are manufactured before the date of publication of this document by CEN.
DIN EN 12753-2011表面处理设备的废气用热净化系统.安全性要求.德文版本EN 12753-2005+A1-2010
This European Standard is applicable to thermal cleaning systems for exhaust gas from surface treatment equipment/systems as given below in which the concerntration of exhaust gas to be cleaned (for the purpose of this European Standard, named \"process gas\") at the inlet to the thermal cleaning system is safely limited within the concentration ranges given in 5.2.2.2.
BS EN 1010-2-2006+A1-2010机械安全性.印刷机和换纸机的设计和构造的安全性要求.包括预压机械的印刷机和涂漆机
This document applies to: Pre-press machinery (machinery and devices for the production of master copies and printing forms): exposure equipment for the production of films and printing forms; equipment for developing films and printing forms; washing machines for printing forms; machines for bending printing forms; punching machines for film and printing forms; cutting machines for film and printing forms; machines for the production of gravure printing forms; scanners. Printing and varnishing machines: proofing presses; sheet-fed printing presses and varnishing machines including digital printing presses; web-fed rotary presses and varnishing machines including digital printing presses; screen printing presses. Auxiliary devices: cylinder and roller washing devices; continuous flow drying devices; powder spraying devices; auxiliary devices on inking and damping units; automatic plate clamping devices; washing equipment for printing forms, rollers and scrapers; pile turners; measuring and control devices.This document shall be used together with !EN 1010-1:2004+A1\". Both parts together identify allsignificant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause4). The specific requirements specified in prEN 1010-2 take precedence over respective requirements in thisstandard.This document does not deal with risks generated by noise emitted from the machines. These issues arefundamentally covered in !EN 1010-1:2004+A1\"This document does not apply to high-pressure cleaning devices and screen printing presses for textilesubstrates.This document is not applicable to printing and varnishing machines including pre-press machinery which aremanufactured before the date of publication of this document by CEN.
