自动和半自动洗衣机检测

自动和半自动洗衣机检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 2900.29-2008电工术语.家用和类似用途电器

本部分规定了家用和类似用途电器的基本术语。本部分适用于家用和类似用途电器相关标准的制修订以及其他相关技术文件的编制和技术交流活动。

GB/T 6113.202-2018无线电骚扰和抗扰度测量设备和测量方法规范 第2-2部分:无线电骚扰和抗扰度测量方法 骚扰功率测量

GB/T 6113的本部分规定了30 MHz~1 000 MHz频段范围内使用吸收钳测量骚扰功率的方法。

GB/T 14536.9-2008家用和类似用途电自动控制器. 电动水阀的特殊要求(包括机械要求)

GB 14536.1-2008中的该章，用下述内容代替：1.1本部分适用于家用和类似用途设备中或随这些设备一起使用的电动水阀，这些设备可以是使用电、燃气、油、固体燃料、太阳能等能源或是它们的组合，应用范围包括加热、空气调节及类似用途。本部分也适用于GB 4706所涉及的各类器具用的电动水阀。1.1.1本部分包含了对水阀的电气性能和阀的机械性能的要求，这两者会影响水阀预期操作。1.1.2本部分适用于电动水阀固有的安全性，适用于涉及到设备保护的操作值和操作程序，适用于家用和类似用途设备中或随这些设备一起使用的电自动控制器的试验。对于非一般家用设备用电动阀，而这些设备是由诸如商店或轻工工厂或农场的非农场的非人员使用的，也包含在本部分范围内。本部分不适用于专门用于工业设备的电动水阀。本部分不适用于：标称连接尺寸在DN 50以上的电动水阀；标称允许压力值在1.6Mpa以上的电动水阀；食品分配器；洗涤剂分配器；蒸汽阀。在本部分中，当不会引起误解时，下列术语有其特定含义：——“阀”一词指电动水阀（包括起动器和阀体组件）。——“起动器”一词意思是“电动机构或原动机构”。——“阀体”一词意思是“阀体组件”。——“设备”一词包括器具和控制系统。1.1.3本部分适用于起动器和相互匹配的阀体。1.1.4本部分适用于单个的阀、作为系统部件的阀和与多功能控制器机械地组合在一起的无电气输出的阀。

GB/T 17499-2017家用洗衣机电脑程序控制器

本标准规定了家用电动洗衣机电脑程序控制器的试验条件、技术要求和试验方法、检验规则、标志、包装、运输和储存。本标准适用于以微处理器为核心、以电信号为基准，晶闸管或类似用途的器件为执行开关所组成的洗衣机电脑程序控制器(以下简称程控器)，包括洗衣机、洗衣干衣机、干衣机用程控器。

GB/T 22684-2008家用和类似用途电动机式程序控制器

本标准规定了家用和类似用途电动机式程序控制器（以下简称程控器）分类与命名、基本参数、技术要求、试验方法和检验规则及标志、包装、运输和储存。本标准适用于家用和类似用途电动机式程序控制器。

GB/T 22937-2008商用洗衣机

本标准规定了商用洗衣机的术语和定义、产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于由人员操作的，对织物进行水洗或干洗的洗衣机，包括商用洗衣机、商用（离心式）脱水机和以四氯乙烯为洗涤剂的商用洗衣机。

GB/T 36931-2018工业洗涤机械术语

本标准界定了工业洗涤机械的术语和定义。本标准适用于工业/商用类的洗涤机械。本标准不适用于制衣行业的专用整理机，也不适用于家用和类似用途的电器。

GB 50215-2015煤炭工业矿井设计规范

本规范适用于设计生产能力0.09Mt/a及以上的新建、改建及扩建的煤炭工业矿井的初步可行性研究、可行性研究和设计。

QB/T 1291-1991自动洗衣机用进水电磁阀

本标准规定了进水电磁间的产品分类、技术要求、试验方法飞检验规则、标志、包装、贮存和运输。\t本标准适用于额定电压为250V以下的全自动洗衣机和半自动洗衣机用电磁阀(以下简称“进水阁”)。

QB/T 1292-1991自动洗衣机用水位压力开关

本标准规定了水位压力开关的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存\t本标准适用于全自动洗衣机和半自动洗衣机用水位压力开关(以下简称“开关”)，供控制水位高度用。

QB/T 2823-2006家用和类似用途电动双驱动洗衣机

本标准规定了家用和类似用途电动双驱动洗衣机（以下简称“双驱动洗衣机）的术语和定义、分类、要求和试验方法。本标准适用于家用和类似用途电动双驱动洗衣机。

QB/T 4137-2010家用和类似用途电动洗衣机用电子程序控制器技术要求

本标准规定了家用和类似用途电动洗衣机用电子程序控制器的术语和定义、产品分类、技术要求和试验方法。 本标准适用于单相额定电压不超过250V，在家用和类似用途电动洗衣机上使用的电子程序控制器。

EN 15020-2006轨道交通.救援车挂钩.性能要求,专用连接体几何尺寸和试验方法

This European Standard specifies the requirements forThe rescue coupler for train sets compliant withThe Technical Specification for Interoperability High Speed Rolling Stock. It definesThe interfaces to which it has to match during rescue operations. It is suitable for locomotives fitted with UIC 520 pattern draw gear and buffers, i.e. moveable draw hook and draw gear capable of compressive loading. Provisions going beyondThe scope of this European Standard need to be agreed upon byThe contracting parties involved.

DIN EN 415-1-2014打包机的安全.第1部分:打包机及相关设备的专用术语和分类,德文版本EN 415-1-2014

This European standard defines the field of packaging machines in detail, but briefly these are: Filling and Dosing machines; closing machines; labelling, decorating and coding machines; cleaning, sterilising, cooling and drying machines; fill and seal machines; inspection machines; container and component handling machines; form, fill and seal machines; cartoning machines; wrapping machines; group or transit packaging machines; pallet or loading unit forming, dismantling and securing machines.

DIN EN 1010-1-2011机械安全性.印刷和纸加工机械的设计和建造的安全性要求.第1部分:通用要求.德文版本EN 1010-1-2004+A1-2010

This document applies to: - printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines. This standard also covers machinery used for the handling of paper, products, printing formes and checking the print quality (auxiliary printing machinery).- paper converting machines, i.e. machines to process, convert or finish paper, board and similar materials which are processed, converted or finished in a similar manner.

DIN EN 1010-2-2011机械安全性.打印机和纸加工机的设计和构造的安全性要求.第2部分:包括预压机械的印刷机和涂漆机;德文版本EN 1010-2-2006+A1-2010

This document applies to: Pre-press machinery (machinery and devices for the production of master copies and printing forms): - exposure equipment for the production of films and printing forms; - equipment for developing films and printing forms; - washing machines for printing forms; - machines for bending printing forms; - punching machines for film and printing forms; - cutting machines for film and printing forms; - machines for the production of gravure printing forms; - scanners. Printing and varnishing machines: - proofing presses; - sheet-fed printing presses and varnishing machines including digital printing presses; - web-fed rotary presses and varnishing machines including digital printing presses; - screen printing presses. Auxiliary devices: - cylinder and roller washing devices; - continuous flow drying devices; - powder spraying devices; - auxiliary devices on inking and damping units; - automatic plate clamping devices; - washing equipment for printing forms, rollers and scrapers; - pile turners; - measuring and control devices. This document shall be used together with EN 1010-1:2004+A1. Both parts together identify all significant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in prEN 1010-2 take precedence over respecti¬ve requirements in this standard. This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004+A1. This document does not apply to high-pressure cleaning devices and screen printing presses for textile substrates. This document is not applicable to printing and varnishing machines including pre-press machinery which are manufactured before the date of publication of this document by CEN.

DIN ISO 7000-2008设备用图形符号.索引和一览表

This International Standard provides a synopsis of those graphical symbols which are placed on equipment orparts of equipment of any kind in order to instruct the person(s) using the equipment as to its operation.

BS EN 500-1-2006+A1-2009移动式筑路机械.安全性.一般要求

1.1 This part of EN 500 specifies the common safety requirements for mobile road construction machinery. The EN 500 series is applicable to mobile road construction machinery as listed in Annex A. When no specific standard exists, EN 500-1 applies.It specifies common requirements for the design and construction of mobile road construction machinery in order to protect workers from accidents and health hazards which could occur during operation, loading, transport and maintenance.Additional specific requirements for certain types of mobile road construction machinery are given in parts 2 to 4 and 6 of this standard.This part of this standard gives safety requirements for all types of mobile road construction machinery and shall be used in conjunction with one of the parts 2 to 4 and 6. These machine-specific parts do not repeat the requirements from part 1 but add to or replace the requirements for the type of mobile road construction machinery in question.Machine-specific requirements in parts 2 to 4 and 6 take precedence over the respective requirements of this standard.For types of mobile road construction machinery not dealt with in parts 2 to 4 and 6, EN 500-1 applies and if for those machinery additional derived risks may arise, these risks have to be taken into consideration.1.2 This European Standard deals with all significant hazards, hazardous situations and events relevant to mobile road construction machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4).This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards as specified in Clause 4.1.3 This European Standard applies to machines which are manufactured after the date of publication of this European Standard by CEN.