个人眼防护装置检测

个人眼防护装置检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 7247.14-2012激光产品的安全.第14部分：用户指南

本标准给出了激光产品的安全使用佳指南，涉及所有由受激发射过程而产生光辐射的装置、组件或系统（不包括发光二极管LEDs）。本标准能够帮助相关人员识别危险、评估风险，适用于与激光安全有关的工作和负有安全职责的人员。

EN 12254-2010激光工作场所的屏蔽物.安全要求和试验

This European Standard specifies functional requirements and a product labelling applicable to temporary and permanent passive guards (in the following called screens) for protection against laser radiation.This standard includes test methods for testing functional performance and the specification of the user documentation to be supplied with the product. The screens are designed to protect the user from: unintentional exposure to direct and/or diffuse laser radiation; a time limited exposure to laser radiation, based on the functional requirements determined by risk assessment.This European Standard applies to supervised screens for installations in working places at which laser radiation up to a maximum mean power of 100 W or single pulse energy of 30 J occurs within the spectral range between 180 nm (0,18 μm) and 106 nm (1000 μm).This European Standard applies to the protection against laser radiation only.This standard does not apply to other hazards including hazards from secondary radiation that can arise during, for example, material processing.This European Standard gives guidance on how to select such screens. Laser enclosures and housings that are supplied as part of the laser product or are supplied to be fitted to a laser system to form a laser product (according to EN 60825-1) are not considered to be within the scope of the standard.

NF E60-601-2-2009机械的安全性.激光加工机械.第2部分:手持激光加工装置的安全性要求

La présente partie de l'ISO 11553 spécifie les exigences applicables aux dispositifs de traitement laser, tels que définis dans l'ISO 11553-1, qui sont portatifs ou actionnés manuellement.L'objectif de la présente partie de l'ISO 11553 est d'attirer l'attention sur les phénomènes dangereux particuliers associés à l'utilisation de dispositifs de traitement laser portatifs et de prévenir les blessures aux personnes. Cela inclut les domaines de l'analyse des phénomènes dangereux et l'évaluation du risque ainsi que les mesures de protection.Les exigences relatives au phénomène dangereux généré par le bruit ne sont pas incluses dans la présente partie de l'ISO 11553. Ces exigences doivent être incluses dans un amendement ultérieur.La présente partie de l'ISO 11553 ne s'applique pas aux produits ou aux équipements à laser fabriqués exclusivement ou expressément pour des applications qui sont exclues du domaine d'application de l'ISO 11553-1.

DIN 23320-5-2014矿业用耐火防护服.矿井救生和毒气救生人员用防护服.第5部分:防护头盔

Flameproof protective clothing are used in the mining to protect against explosions, flames and other flame jets.This standard describes the additional requirements which are requested to protective hoods besides the safety requirements of the standard DIN 23320-1 out of DIN EN 469.

DIN EN 443-2008建筑和其它结构用防火头盔

This European Standard specifies minimum requirements for firefighters' helmets protecting the upper headmainly against the effects of impact, penetration and heat and flame, whilst firefighting in buildings and otherstructures.

DIN EN 706-2009农业机械.葡萄蔓翻转机.安全

This standard specifies safety requirements and their verification for design and construction of self-propelled. mounted or semi-mounted vine shoot tipping machines. These mobile machines are used for trimming vineyard and other fruit tress that grow in the same way (trellising plants) and similar applications. Their cutting tools are either: -- High speed rotative blades (which cut by impact), or -- Rotative blade and counter blade (which cut by shearing), or -- Reciprocating cutting bar (which cuts by shearing). This standard does not apply to:-- Tipping machines for free standing fruit bushes. Walk-behind pedestrian controlled machines,-- Machines intended to be mounted on walk-behind pedestrian controlled machines,-- Hand-held machines.NOTE 1 Machines intended to be mounted on walk-behind pedestrian controlled machines will be dealt with in the nextrevision of this standard.This standard describes methods for the elimination or reduction of risks which need specific requirements forvine shoot tipping machines. It does not deal with general hazards, particularly general hazards related tomobility including those specific to self-propelled machines. These aspects will be dealt with in anotherstandard produced by CEN/TC 144 (see introduction).In addition, it specifies the type of information on safe working practices to be provided by the manufacturerThe list of significant hazards dealt with in this standard is given in annex A Annex A also indicates thehazards which have not been dealt with.NOTE 2 This standard does not deal with:-- the location and the operation of the controls: the adaptability and the setting up of mounted machines on tractors or other vehiclesEnvironmental aspects have not been considered in this standard.This standard applies primarily to machines which are manufactured after the date of issue of the standard.

DIN EN 1486-2008消防人员用防护衣服.专门防火用反射服的试验方法和要求

This European Standard considers requirements for the protection of the whole body including head, hands andfeet. Clothing for head and feet according to this European Standard, however, may only provide sufficientprotection when worn together with such basic PPE specified in the relevant standards as noted in paragraphs4.2 and 44 of this European Standard.This European Standard specifies test methods and minimum performance requirements for reflective protectiveclothing used in specialised fire-fighting.This clothing provides protection against flame lick and intense radiant heat and is worn for short periods only, toenable the fire-fighter to enter specific high-risk fire-fighting and fire rescue situations which also require the useof breathing apparatus.This European Standard only covers protective clothing that relies upon the ability of the outer material to reflectintense radiant heat. This type of reflective clothing may also be used for industrial applications involving highlevels of radiant heat.The reflective clothing specified in this European Standard is not covered in EN 469.

DIN EN 1731-2007人眼保护.网型护目和护面器

This European Standard specifies materials, design, performance requirements, test methods and marking requirements for mesh eye and face protectors.This standard is not applicable to eye and face protectors for use against liquid splash (including molten metal), hot solid risks, electrical hazards, infrared and ultra violet radiation.Mesh eye and face protectors for use in sports such as ice hockey and fencing are excluded.

DIN EN 12254-2012激光工作场所用屏蔽物. 安全性要求和试验

This standard specifies functional requirements and a product labelling applicable to temporary and permanent passive guards (in the following called screens) for protection against laser radiation. This standard includes test methods for testing functional performance and the specification of the user documentation to be supplied with the product. The screens are designed to protect the user from unintentional exposure to direct and/or diffuse laser radiation; a time limited exposure to laser radiation, based on the functional requirements determined by risk assessment. This standard applies to supervised screens for installations in working places at which laser radiation up to a maximum mean power of 100 W or single pulse energy of 30 J occurs within the spectral range between 180 nm (0,18 µm) and 106 nm (1000 µm). This standard applies to the protection against laser radiation only. This standard does not apply to other hazards including hazards from secondary radiation that can arise during, for example, material processing. This standard gives guidance on how to select such screens. Laser enclosures and housings that are supplied as part of the laser product or are supplied to be fitted to a laser system to form a laser product (according to EN 60825-1:2007) are not considered to be within the scope of the standard.

DIN EN 12942-2009呼吸保护装置 采用全面罩、半面罩或四分之一面罩动力辅助过虑装置 要求、试验和标记

This European Standard specifies minimum requirements for power assisted respiratory protective deviceswhich incorporate a full face mask, half mask or a quarter mask together with gas, particle or combinedfilter(s) used as respiratory protective devices. It does not cover devices designed for use in circumstanceswhere there is or might be an oxygen deficiency (concentration in oxygen less than 17 % by volume). Also,it does not cover respiratory protective devices designed tor escape purposes.Laboratory tests and practical performance tests are included for the assessment of compliance with therequirements.

DIN EN 13567-2007防护服.击剑运动员的手、胳膊、胸部、腹部、腿部、生殖器和面部用防护器.要求和试验方法

This European Standard specifies the general requirements for ergonomics, sizing, coverage and performance of protective clothing and equipment for use in the sport of fencing. Requirements for the marking of clothing and equipment and the information to be supplied by the manufacturer are given. Test methods are described and performance levels are defined.

DIN-Fachbericht CEN/TR 15441-2006固体回收燃料.职业健康问题指南

The Technical Report considers aspects of occupational safety and health regarding production and trade of solid recovered fuels. Production, handling, storage, trade, sampling or analysis of SRF can be accompanied with certain health risks, not only by hazardous chemical products, but by biological agents, too. In addition, the risk of concomitance of hazardous waste in the input material cannot be excluded. These risks will be described in this Technical Report.

BS 6739-2009过程控制系统仪表的实施规范:安装设计和实施

This British Standard gives recommendations for, and guidance on,the design for the installation of instrumentation of measurementand control systems in the process industry, and the implementationand commissioning of this installation. It is intended to be used asa manual of good practice on the site and also to assist those whodesign the installation.

BS 8467-2006防护服.化学、生物、放射和核(CBRN)试剂防护用个人保护装置.分类、性能要求和试验方法

To be read in conjunction with BS 8468

BS EN 402-2003呼吸保护装置.逃逸用带全面罩或口罩组件的满足需氧量的独立开路压缩空气呼吸装置.要求、检验和标记

This European Standard specifies minimum requirements for lung governed demand self-contained open-circuit compressed air breathing apparatus for escape.\nThis European Standard does not apply to apparatus for work and rescue or to diving apparatus.\nLaboratory and practical performance tests are included for the assessment of compliance with the requirements.

BS EN 443-2008建筑和其它机构用防火头盔

This European Standard specifies minimum requirements for firefighters' helmets protecting the upper headmainly against the effects of impact, penetration and heat and flame, whilst firefighting in buildings and otherstructures.

BS EN 1486-2007消防人员防护服.特制防火专用反射服的检验方法和要求

This European Standard considers requirements for the protection of the whole body including head, hands andfeet. Clothing for head and feet according to this European Standard, however, may only provide sufficientprotection when worn together with such basic PPE specified in the relevant standards as noted in paragraphs4.2 and 4.4 of this European Standard.This European Standard specifies test methods and minimum performance requirements for reflective protectiveclothing used in specialised fire-fighting.This clothing provides protection against flame lick and intense radiant heat and is worn for short periods only, toenable the fire-fighter to enter specific high-risk fire-fighting and fire rescue situations which also require the useof breathing apparatus.This European Standard only covers protective clothing that relies upon the ability of the outer material to reflectintense radiant heat. This type of reflective clothing may also be used for industrial applications involving highlevels of radiant heat.The reflective clothing specified in this European Standard is not covered in EN 469.

BS EN 12254-2010激光工作场所用屏蔽物.试验和安全性要求

This European Standard specifies functional requirements and a product labelling applicable to temporary andpermanent passive guards (in the following called screens) for protection against laser radiation. Thisstandard includes test methods for testing functional performance and the specification of the userdocumentation to be supplied with the product. The screens are designed to protect the user from: unintentional exposure to direct and/or diffuse laser radiation; a time limited exposure to laser radiation, based on the functional requirements determined by riskassessment.This European Standard applies to supervised screens for installations in working places at which laserradiation up to a maximum mean power of 100 W or single pulse energy of 30 J occurs within the spectralrange between 180 nm (0,18 μm) and 106 nm (1 000 μm).This European Standard applies to the protection against laser radiation only. This standard does not apply toother hazards including hazards from secondary radiation that can arise during, for example, materialprocessing.This European Standard gives guidance on how to select such screens.Laser enclosures and housings that are supplied as part of the laser product or are supplied to be fitted to alaser system to form a laser product (according to EN 60825-1) are not considered to be within the scope ofthe standard.

BS EN 13567-2002+A1-2007防护服装.击剑者用手、臂、胸、腹部、腿、生殖器和脸部防护装置.要求和试验方法

This European Standard specifies the general requirements for ergonomics, sizing, coverage and performance ofprotective clothing and equipment for use in the sport of fencing. Requirements for the marking of clothing andequipment and the information to be supplied by the manufacturer are given. Test methods are described andperformance levels are defined.

BS EN 13794-2002呼吸保护装置.逃生用独立的封闭管路呼吸装置.要求、试验、标记

This European Standard specifies minimum requirements for self-contained closed-circuit breathing apparatus,chemical oxygen (KO2, NaClO3) type and compressed oxygen type, for escape (short: oxygen escape apparatus).This European Standard does not apply to apparatus for work and rescue and to diving apparatus.Laboratory and practical performance tests are included for the assessment of compliance with the requirements.