手动自定心卡盘检测

发布时间：2024-06-21 作者：中析研究所浏览：

GB/T 4346-2008机床.手动自定心卡盘

本标准规定了手动自定心卡盘（以下简称卡盘）的型式和参数、技术要求、试验方法、检验规则、标志及包装。本标准适用于盘丝式三爪卡盘，其他盘丝式卡盘也可参照使用。

GB/T 6477-2008金属切削机床.术语

本标准规定了金属切削机床的一般术语、车床、铣床、钻床、镗床、磨床、齿轮加工机床、螺纹加工机床、刨床和插床、拉床、锯床、组合机床及组合机床自动线、刻线机、管子加工机床、机床附件，运动、参数、零部件和加工方法的术语及其定义。本标准适用于一般用途的金属切削机床（以下简称机床）。

GB/T 23290-2009机床安全.卡盘的设计和结构安全要求

本标准规定了减少和防止3.1定义的卡盘所造成危险的要求和/或措施。与卡盘有关的主要危险见第4章。本标准适用于卡盘的设计者、制造者、供货方和进口方。本标准还给出了制造者应为使用者提供的信息。

GB/T 23291-2009机床.整体爪手动自定心卡盘检验条件

本标准规定了两个以上卡爪的机床用手动自定心卡盘几何精度检验和相应公差。本标准适用于快速夹持不同尺寸工件的整体硬爪卡盘。本标准仅规定了校正工件中心的卡盘旋转精度检验，不适用其他动态性能的检验，如平衡测试或夹紧力的测试。

GB/T 31396.1-2015机床分离爪自定心卡盘尺寸和几何精度检验第1部分:键、槽配合型手动卡盘

GB/T 31396的本部分规定了分离爪(键、槽配合型)自定心手动卡盘的互换性尺寸和几何精度检验及相应公差。

GB/T 31396.2-2015机床分离爪自定心卡盘尺寸和几何精度检验第2部分:键、槽配合型动力卡盘

GB/T 31396的本部分规定了分离爪(键、槽配合型)自定心动力卡盘的互换性尺寸和几何精度检验及相应公差。

JB/T 11768-2014机床精密可调手动自定心卡盘

本标准规定了精密可调手动自定心卡盘的型式和参数、技术要求、几何精度、试验方法、检验、标志、包装和随行文件等。本标准适用于米制、英寸制三爪和六爪等盘丝型精密可调手动自定心卡盘。

ISO 3442-1-2005机床.双爪自动定心卡盘的尺寸和几何试验.第1部分:舌槽型手动卡盘

This part of ISO 3442 specifies the sizes for interchangeability of self-centring, manually operated chucks with two-piece jaws (tongue and groove type) and describes, by reference to ISO 230-1, the geometric tests for such chucks. It also specifies the tolerances which apply to these tests.

SIS SS-ISO 3089-1992机床用手动自定心卡盘．标准精度．验收规范（几何测试）

This International Standard describes, with reference to ISO 230-1, the geometrical tests and the corresponding permissible deviations of two classes of accuracy for self-centring, manually-operated chucks for machine tools with more than two jaws.This type of chuck has jaws known as \"one-piece härd jaws\", the relatively large stroke of which allows quick adaptation to the most varied sizes of workpieces without dismounting.This International Standard deals only with the inspection of rotational accuracy of the chuck, the straightening and the centring of workpieces. It does not apply to other dynamic qualities, such as measurement of counterbalancing, balancing or measurement of gripping powers.

GSO ISO 3442-1-2008机床.带两件式钳口的自定心卡盘的尺寸和几何试验.第1部分：带舌槽式钳口的手动卡盘

TS ISO 3089-2009机床. 整体爪手动自定心卡盘检验条件

This standard specifies, with reference to ISO 230-1, the geometric tests and corresponding tolerances for self-centring, manually-operated chucks for machine tools with more than two jaws. This type of chuck has jwas known as \"one-piece hard jaws\", the relatively large stroke of which allows quick adaptation to the most varied sizes of workpieces without dismounting.

DIN 6350-1-2010手动中心夹件的车床夹盘.第1部分:圆柱形安装凹槽

Chucks according to this standard are clamping devices for hand operation with three or four jaws for workholding with cylindrical connection. The jaws are not individually adjustable.

DIN 6350-2-2010手动车床卡盘的中心夹件.第2部分:带1:4锥度安装凹座

Chucks according to this standard are clamping devices for hand operation with three or four jaws for workholding, either with bajonet clamping according to ISO 702-3 or by head screws according to ISO 702-1. The jaws are not individually adjustable.

DIN 6351-2-2010手动车床卡盘.非自定心卡盘.第2部分:带1:4锥度安装槽

Lathe chucks in accordance to this standard are hand-operated chuck jaws with tree or four jaws for tool fitting by bayonet discs or from ahead by cheese head screws. They use jaws, which may be adjusted individually.

UNI ISO 3089-2009机床.整体爪手动自定心卡盘检验条件

La norma descrive, con riferimento alla UNI ISO 230-1, le prove geometriche e le corrispondenti tolleranze per le piattaforme autocentranti a comando manuale inserite in macchine utensili aventi più di due griffe.Questo tipo di piattaforme monta le cosiddette griffe \"integrali\", la cui corsa relativamente estesa consente un afferraggio semplice di particolari di varie dimensioni senza necessità di smontaggio e sostituzione della piattaforma.La norma tratta solamente le prove di accuratezza di rotazione della piattaforma, nonchè l'allineamento e il centraggio del pezzo. Essa non si applica ad altre grandezze dinamiche, quali le misurazioni del controbilanciamento o delle forze di serraggio.