组合机床 侧底座检测

组合机床 侧底座检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 3668.3-1983组合机床通用部件 回转工作台和回转工作台用多边形中间底座尺寸

本标准规定了组合机床回转工作台和回转工作台用多边形中间底座的有关互换性尺寸。

GB/T 3668.6-1983组合机床通用部件 滑台侧底座尺寸

本标准规定了组合机床滑台侧底座的有关互换性尺寸。

GB/T 3668.8-1983组合机床通用部件 立柱侧底座尺寸

本标准规定了组合机床立柱侧底座的有关互换性尺寸。

GB/T 6477-2008金属切削机床.术语

本标准规定了金属切削机床的一般术语、车床、铣床、钻床、镗床、磨床、齿轮加工机床、螺纹加工机床、刨床和插床、拉床、锯床、组合机床及组合机床自动线、刻线机、管子加工机床、机床附件，运动、参数、零部件和加工方法的术语及其定义。本标准适用于一般用途的金属切削机床（以下简称机床）。

JB/T 1534-2006组合机床 通用技术条件

本标准规定了组合机床（包括组合机床自动线、组合机床通用部件，以下简称机床）基本的、共同性的技术要求。 本标准适用于机床的设计、制造、检验与验收。

JB/T 7448.2-2006小型组合机床 第2部分:技术条件

JB/T 7448的本部分规定了小型组合机床（包括小型组合机床自动线、小型组合机床通用部件，以下简称机床）制造和验收的技术要求。 本部分适用于机床的设计、制造、检验与验收。

JB/T 9882-2013组合机床 侧底座 精度检验

本标准规定了组合机床侧底座的几何精度要求和检验方法。本标准适用于组合机床及其自动线的滑台侧底座,也适用于立柱侧底座。

ISO 2769-1973组合机床通用部件 滑台用侧底座

Specifies certain dimensions relating to the interchangeability of wing bases for slide units used in special machines constructed from modular units. Gives furthermore nominal size and designation.

ISO 2934-1973组合机床通用部件 立柱侧底座

Specifies certain dimensions relating to the interchangeability of wing bases for columns used in special purpose machines constructed from modular units. The nominal size of a wing base for columns is given by the nominal width of the saddle on the related slide unit.

SIS SS-ISO 2769-1992组合机床通用部件．滑动部件侧底座

This International Standard specifies certain dimensions relating to the interchangeability of wing bases for slide units used in special machines constructed from modulär units.

SIS SS-ISO 2934-1992组合机床通用部件．柱的侧底座

This International Standard specifies certain dimensions relating to the interchangeability of wing bases for columns used in special purpose machinesconstructed from modulär units.

TS 6649-1989组合机床通用部件. 滑台侧底座

This standard covers modular units for machine tool construction-Wing bases for slide units.

TS 6855-1989组合机床通用部件. 立柱侧底座

Specifies certain dimensions relating to the interchangeability of wing bases for columns used in special purpose machines constructed from modular units. The nominal size of a wing base for columns is given by the nominal width of the saddle on the related slide unit.

TS ISO 2934-2018组合机床结构通用部件. 立柱侧底座

Specifies certain dimensions relating to the interchangeability of wing bases for columns used in special purpose machines constructed from modular units. The nominal size of a wing base for columns is given by the nominal width of the saddle on the related slide unit.

UNI ISO 2769-1984组合机床通用部件.滑台侧底座

Versione in lingua italiana della ISO 2769 (edizione mag. 1973) adottata senza varianti. Stabilisce alcune dimensioni relative all' intercambiabilita' dei basamenti laterali per tavole con spostamento rettilineo utilizzate per la costruzione di macchine speciali con elementi modulari.

UNI ISO 2934-1984组合机床通用部件.床身组件的侧底座

Versione in lingua italiana della ISO 2934 (edizione dic. 1973), adottata senza varianti. Stabilisce alcune dimensioni riguardanti l' intercambiabilita' dei basamenti laterali per montanti, utilizzati per la costruzione di macchine speciali costruite con elementi modulari.