农林机械通用要求检测

农林机械通用要求检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 15370.3-2012农业拖拉机 通用技术条件 第3部分：130kW以上轮式拖拉机

GB/T 15370的本部分规定了 130 kW以上农业轮式拖拉机的技术要求、试验方法、检验规则、交货、标志、运输和贮存、本部分适用于130 kW以上农业轮式拖拉机(以下简称拖拉机)、

GB/T 17126.1-2009农业拖拉机和机械.动力输出万向节传动轴和动力输入连接装置.第1部分:通用制造和安全要求

GB/T 17126的本部分规定了农业拖拉机或自走式机械的动力输出万向节传动轴和机具的动力输入连接装置。本部分确立了在给定制造和安全要求下，动力输出万向节传动轴静态和动态扭转强度的测定方法。本部分适用于动力输出万向节传动轴和至少通过两个轴承与传动轴机械连接的防护罩。本部分不适用于通过设置位置进行防护的动力输出万向节传动轴，也不适用于逆传限制的装置和转矩限制器机械性的评价。本部分未考虑环境方面的因素。

GB/T 24688-2009动物防疫消毒机.试验方法

本标准规定了动物防疫消毒机的试验条件和试验方法。本标准适用于配套液力泵及轴流式风机的喷雾式动物防疫消毒机。

GB/T 39515.1-2020农林机械 喷雾机的环境要求 第1部分:通用要求

GB/T 39515的本部分规定了喷雾机(见ISO 5681定义)的设计和性能通用要求，以尽量减少在使用喷雾机过程中潜在的环境污染风险，包括制造商能够预见的风险。本部分还规定了识别喷雾机及其某些部件的要求以及使用说明书内容的低要求。本部分适用于农业、园艺、林业等领域背负式喷雾器除外的全部类型喷雾机。本部分与GB/T 39515的其他每个部分一起使用，其他部分规定了特定类型喷雾机的具体要求(参见附录A)。本部分不包含安全方面的内容，安全方面的要求见ISO 4254-6。本部分不适用于其发布日期之前生产的喷雾机。

LY/T 1041-2018林业机械 苗圃筑床机

本标准规定了苗圃筑床机(以下简称“筑床机”)的术语和定义、型号编制方法、基本参数、技术要求及试验方法、标志、包装、使用说明书、运输和贮存。本标准适用于以拖拉机或苗圃通用底盘为配套动力的悬挂式连接的苗圃筑床机。

LY/T 3021-2018园林机械 以锂离子电池为动力源的便携式割灌机和割草机

本标准规定了以锂离子电池为动力源的便携式割灌机和割草机(以下简称“锂电割灌机”和“锂电割草机”)的术语和定义、型号编制方法、基本参数、技术要求及试验方法、标志、使用说明书、包装、运输、贮存和处理。本标准适用于以标称电压不大于直流75 V可充电锂离子电池包(电池组)供电的锂电割灌机和锂电割草机。本标准不适用于：——剪刀型电动割灌机和电动割草机；——自进型电动割灌机和电动割草机；——切割器件控制器件与切割头之间小于600 mm距离的电动割灌机和电动割草机；——以使用者自行安装的通用电池包或电池组为动力源的电动割灌机和割草机；——其他非锂离子电池为动力源的电动割灌机和电动割草机。

JB/T 11922-2014智能化奶牛个体精料变量补饲机

本标准规定了智能化奶牛个体精料变量补饲机的术语和定义、型式与基本参数、技术要求、试验方法、检验规则、标志、包装、运输与贮存。本标准适用于置放在奶牛运动场或牛舍内的固定式智能化奶牛个体精料变量补饲机(以下简称补饲机)。

JB/T 12451-2015喷雾式动物防疫消毒机 技术条件

本标准规定了喷雾式动物防疫消毒机的型号标记、技术要求、试验方法、检验规则以及标牌、包装、运输和贮存。本标准适用于配套液力泵及轴流式风机的喷雾式动物防疫消毒机(以下简称防疫消毒机)。

DIN EN 609-1-2017农林机械.劈木机的安全性.第1部分:楔形劈木机;德文版本EN 609-1-2017

This European Standard specifies safety requirements, and their verification for the design and construction of horizontal and vertical wedge splitters, designed to be used by one operator for splitting wood (short log and long log), irrespective of the nature of the power source used. The splitting process of a wedge splitter is designed as a single operatored control station. However it is possible, that more than one operator are working, e. g. loading and/or unloading the splitter. On a dual purpose circular saw for firewood/log splitting machine only the log splitter part of the machine is covered by this standard. For circular saws for firewood see EN 1870-6.This standard describes methods for the elimination or reduction of risks arising from their use. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.

DIN EN 709-2011农业和林业机械.带有装配好的旋转式中耕机的侧面操纵拖拉机,电动锄具,带驱动轮的电动锄具.安全;德文版本EN 709-1997+A4-2009

This European Standard specifies safety requirements and testing for design and construction of, pedestrian controlled tractors with mounted rotary cultivators with the cultivator rotating axis horizontal and perpendicular to the direction of motion of the machine, motor hoes and motor hoes with drive wheel(s), all as used in agriculture, forestry, landscaping and gardening (including amenity use). It describes methods for the elimination or reduction of risks arising from their use. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. This European Standard does not cover the requirements to fulfil national road traffic regulations such as lights, steering and braking. Environmental aspects have not been considered in this standard.

DIN EN ISO 4254-10-2011农业机械.安全性.第10部分:旋转式摊草机和搂草机(ISO 4254-10-2009).德文版本EN ISO 4254-10-2009 + AC-2010

This part of ISO 4254, to be used together with ISO 4254-1, specifies safety requirements and their verification for the design and construction of rotary tedders, rotary tedder-rakes, including rotary drum rakes, used by one person (the operator) only, having one or several powered rotors, mounted, semi-mounted, trailed and self-propelled. In additon, it specifies the type of information on safe working practies, including residual risks, to be provided by the manufacturer.

DIN EN ISO 4254-11-2011农业机械.安全性.第11部分:捡拾打捆机(ISO 4254-11-2010).德文版本EN ISO 4254-11-2010

This part of ISO 4254, intended to be used together with ISO 4254-1, specifies safety requirements and their verification for the design and construction of self-propelled and trailed pick-up balers independent of the shape or size of the bales formed. In addition, this document specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

DIN EN ISO 16230-1-2016农业机械和拖拉机.高压电气和电子元件和系统的安全性.第1部分:通用要求(ISO 16230-1-2015).德文版本EN ISO 16230-1-2015

The standard specifies safety requirements for high voltage components and systems of agricultural machinery and tractors.

BS EN ISO 4254-10-2009农业机械.安全性.旋转摊草机和搂草机

This part of ISO 4254, to be used together with ISO 4254-1, specifies the safety requirements and theirverification for the design and construction of rotary tedders, rotary rakes and rotary tedder–rakes, includingrotary drum rakes, used by one person (the operator) only, having one or several powered rotors, mounted,semi-mounted, trailed or self-propelled. In addition, it specifies the type of information on safe workingpractices, including residual risks, to be provided by the manufacturer.This part of ISO 4254 is not applicable to:a) machines with ground-driven tines or ground-wheel–driven tines (e.g. sunflower rakes);b) parallel bar rakes;c) chain or endless belt type rakes;d) pedestrian-controlled tedders and rakes;e) machines equipped with a pick-up device.When requirements of this part of ISO 4254 are different from those which are stated in ISO 4254-1, therequirements of this part of ISO 4254 take precedence over the requirements of ISO 4254-1 for machines thathave been designed and built according to the provisions of this part of ISO 4254.