保护头盔检测

保护头盔检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB 6675.2-2014玩具安全 第2部分:机械与物理性能

GB6675的本部分适用于所有玩具,即设计用于或预定用于14岁以下儿童玩耍的任何产品或材料。本部分适用于消费者首次得到的玩具,也适用于通过合理的、可预见的正常使用和滥用测试后的玩具,除非另有特殊声明。本部分规定了可接受的玩具结构特征的要求,包括形状、尺寸、轮廓、间隙(如摇铃玩具、小零件、锐利尖端、锐利边缘、铰链等)及某些玩具性能的参数要求(非弹性头弹射物的大动能、某些乘骑玩具的小倾倒角等)。本部分规定了从新生婴儿至14岁儿童使用的不同年龄组玩具的要求及测试方法。这些要求随玩具所对应不同年龄组而不同。特定年龄组儿童使用的玩具的要求是根据危险的特性及儿童应对的智力和体力而制定的。

GB 6675-2003玩具安全技术规范

本标准适用于所有的玩具，即设计或预定供14岁以下儿童玩耍的所有产品和材料。除非特别申明，本标准不仅适用于任何在市场上销售的玩具（含试用和免费赠送的玩具）及生产并供境内销售的玩具，而且适用于正常使用及可预见的合理滥用后的玩具。 本标准不适用于不以儿童为使用对象的和使用中要求监管或符合特殊条件的玩具。

GB/T 28285-2012飞机氧气系统术语

本标准规定了飞机氧气系统常用术语及其定义。本标准适用于飞机氧气系统的设计、制造、试验、使用、维修、教学和管理。

GB/T 51339-2018非煤矿山采矿术语标准

本标准适用于开采除煤炭外的金属非金属矿物、放射性矿物、建筑材料以及石油化工原料等矿山的咨询、设计、施工、生产、科研、教学和管理等方面，吸收了部分国外矿业资本市场公开报告术语定义。

ASTM F1492-2000溜冰板和滚轴溜冰用的保护头盔标准规范

1.1 These specifications cover performance requirements for helmets to be used in the activities of skateboarding and trick roller skating. 1.2 All testing and requirements of these specifications are to be carried out in accordance with Test Method F1446, except where noted herein. 1.3 The values stated in SI units are to be regarded as the standard. 1.4 Partial utilization of this specification is prohibited. Any statement of compliance with this specification shall be a certification that the product meets all of the requirements of the specification in their entirety. A product that fails to meet any one of the requirements of this specification is considered to have failed the specification, and shall not be sold with any indication that it meets parts of the specification.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM F1492-2008溜冰板和滚轴溜冰用的保护头盔的标准规范

1.1 This specification covers performance requirements for helmets to be used in the activities of skateboarding and trick roller skating. 1.2 All testing and requirements of this specification shall be in accordance with Test Methods F 1446, except where noted herein. 1.3 Partial utilization of this specification is prohibited. Any statement of compliance with this specification shall be a certification that the headgear meets all of the requirements of the specification in their entirety. A headgear that fails to meet any one of the requirements of this specification is considered to have failed the specification, and shall not be sold with any indication that it meets parts of the specification. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM F1492-2008(2015)溜冰板和滚轴溜冰用保护头盔的标准规格

1.1x00a0;This specification covers performance requirements for helmets to be used in the activities of skateboarding and trick roller skating. 1.2x00a0;All testing and requirements of this specification shall be in accordance with Test Methods F1446, except where noted herein. 1.3x00a0;Partial utilization of this specification is prohibited. Any statement of compliance with this specification shall be a certification that the headgear meets all of the requirements of the specification in their entirety. A headgear that fails to meet any one of the requirements of this specification is considered to have failed the specification, and shall not be sold with any indication that it meets parts of the specification. 1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM F1492-2015溜冰板和滚轴溜冰用保护头盔的标准规格

1.1x00a0;This specification covers performance requirements for helmets to be used in the activities of skateboarding and trick roller skating. 1.2x00a0;All testing and requirements of this specification shall be in accordance with Test Methods F1446, except where noted herein. 1.3x00a0;Partial utilization of this specification is prohibited. Any statement of compliance with this specification shall be a certification that the headgear meets all of the requirements of the specification in their entirety. A headgear that fails to meet any one of the requirements of this specification is considered to have failed the specification, and shall not be sold with any indication that it meets parts of the specification. 1.4x00a0;The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5x00a0;This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM F1492-2022溜冰板和滚轴溜冰用保护头盔的标准规格

1.1 This specification covers performance requirements for helmets to be used in the activities of skateboarding and trick roller skating. 1.2 All testing and requirements of this specification shall be in accordance with Test Methods F1446, except where noted herein. 1.3 Partial utilization of this specification is prohibited. Any statement of compliance with this specification shall be a certification that the headgear meets all of the requirements of the specification in their entirety. A headgear that fails to meet any one of the requirements of this specification is considered to have failed the specification, and shall not be sold with any indication that it meets parts of the specification. 1.4 This standard is subject to revision at any time by ASTM. It must be reviewed every five years and if not revised either reapproved or withdrawn. References to the standard must include the version date. No references to a version that has been replaced or withdrawn shall be placed on any product or its packaging manufactured more than 24 months after the effective revision or withdrawal date. Go to astm.org to verify the latest version of this standard. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

EN 13087-7-2000防护帽的试验方法.第7部分:耐火性;包含修改件A1-2001

This European Standard describes methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard.This standard specifies the methods of test for flame resistance.

COVENIN 815-1976委内瑞拉标准中关于工业专用保护头盔的规定

Esta norma contempla las características de los Cascos de Protección Personal de Uso Industrial, con el fin de pro-teger la cabeza de lcs usarios.

NP EN 1384-2000马术活动用到的保护头盔

A presente Norma Europeia especifica os requisitos relativos aos capacetes de protecção com ou sem pala para pessoas envolvidas em actividades equestres.A presente Norma indica requisitos de segurança que incluem métodos de ensaio e os níveis de desempenho em matéria de absorção ao impacto, da resistência à penetração, bem como da resistência e da eficácia do sistema de retenção; abrangendo também a deflexão da pala, caso o capacete a possua.

DIN 820-12-2014标准化. 第12部分: 安全方面列入标准的指南(ISO/IEC指南51-2014)

This Standard provides a structure for inclusion of safety aspects in standards. It adopts a risk based approach and addresses the complete life of the product, process or service. This Standard contains regulations for the presentation of standards with safety regulations. This Standard also contains examples for warning notices in testing standards.

DIN CEN/TR 16148-2011头和脖子遭撞击,烧伤和噪音伤害标准-CENT头盔标准委员会指南;德文版本CEN/TR 16148-2011

Members of helmet Standards committees frequently need to define limits for test procedures. Such limits relate to test values that indicate the potential for injury and yet it is often difficult for members to know the type and severity of injury that is represented by a given test value. Over the years, criteria have been developed for different body regions and usually these have been derived from a combination of accident and casualty data, and tests on cadavers, cadaver body parts, animals and human volunteers. However, such criteria are often used by the automotive industry as pass/fail values without a clear understanding of human tolerance to injurious forces. This sometimes leads to the mistaken belief that any value below the stated limit implies uninjured and all values above imply a serious or fatal injury. This misconception gives very little freedom to choose values that are different from the often-inappropriate automotive value. This is particularly true for head injury criteria for which values for a helmeted head may be different to those for the unhelmeted head. Many accidents to wearers of helmets, which cover a wide range of activities from horse riding to downhill skiing, result in a closed head injury. This is when the brain is damaged without any skull or external tissue damage. Conversely, head injuries in automotive accidents are much more frequently open head injuries with skull fracture and soft tissue lesions. Other misconceptions arise because of the failure to understand that human response to a given dose or injurious parameter varies across a range of the population. The dose response curve tends to be \"S\" (sigmoid) shaped such that as the magnitude of the injurious parameter increases so does the percent of the population that sustains an injury of a given severity. Thus, a family of \"S\" curves can be generated for a range of injury severity such as AIS and a measurement or criterion such as HIC, the Head Injury Criterion.