电动转向管柱总成检测

电动转向管柱总成检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 8423.2-2018石油天然气工业术语 第2部分:工程技术

GB/T 8423的本部分界定了石油天然气工业工程技术服务专用的术语及定义。本部分适用于石油天然气工程技术服务领域，石油天然气工业其他领域可参照使用。

GB/T 21411.2-2009石油天然气工业井下设备.人工举升用螺杆泵系统.第2部分:地面驱动装置

本部分对石油天然气工业使用的螺杆泵地面驱动装置的设计、设计验证和有效性、制造和数据控制、性能评价和维修等方面提出了要求。本部分适用于满足地面驱动装置定义的产品。同时，附录提供了刹车系统的选择、安装、操作以及抽油杆的选择和使用等信息。除了整体设计，本部分不涵盖以下设备:底部驱动系统、抽油杆、光杆卡瓦、密封盒、电控设备、仪表、外部电源转换设备、辅助设备(如皮带、皮带轮和设备护罩)。其他标准里可能会覆盖这些设备的内容。

GB/T 21412.1-2010石油天然气工业 水下生产系统的设计与操作 第1部分：一般要求和推荐做法

本部分制定了整套水下生产系统从设计到废弃各个阶段的一般要求和推荐做法，作为一个纲领性文件用于指导和制定涉及到水下生产系统各个组成部分更为详细要求的子系统标准。同时，对于子系统标准内未包括的某些部分，如系统设计、结构、管汇、吊装设备、颜色和标记等，也给出了较为详细的要求。对那些应用范围有限的特种设备，如密闭在干式舱中的组合式采油树、采油树和管汇等，这里未做专门讨论，但本部分中的相关条款同样适用于这类设备。

GB/T 21412.4-2013石油天然气工业 水下生产系统的设计与操作 第4部分:水下井口装置和采油树设备

GB/T 21412的本部分规定了水下井口装置、泥线井口装置、钻通泥线井口装置以及水下立式和卧式采油树规范,以及设备搬运、试验和安装所需的相关工具。还规定了独立的分总成(用来建造完整的水下采油树总成)和完整的水下采油树总成的设计、材料、焊接、质量控制(包括工厂验收试验)、标志、贮存和运输。用户有责任确保水下设备满足其安装地所属政府法规的任何附加要求。这不在本部分的范围之内。当适用时,本部分也可应用于卫星井、丛式井和用于基盘式的多层完井等方面的设备。本部分适用于下列设备:a)水下采油树--采油树连接装置和油管悬挂器;--阀、阀组和阀驱动器;--节流阀和节流阀驱动器;--排放阀、测试阀和隔离阀;--TFLY形四通;--再入接口;--采油树帽;--采油树管路;--采油树导向架;--采油树送人工具;--采油树帽送入工具;--采油树安装的出油管线或控制管缆连接装置;--油管头和油管头连接装置;--出油管线底座和送入回收工具;--采油树安装的控制装置接口(仪器、传感器、液压管或管配件、电气控制装置电缆和附件);b)水下井口装置--导管头;--井口头;--套管悬挂器;--密封总成;--导向基座;--孔保护装置和耐磨衬套;--防腐帽;c)泥线悬挂系统--井口装置;--送入工具;--套管悬挂器;--套管悬挂器送入工具;--水下完井回接工具;--泥线井口装置水下完井异径连接装置;--油管头;--防腐帽;d)钻通泥线悬挂系统--导管头;--表层套管悬挂器;--井口头;--套管悬挂器;--环空密封总成;--孔保护装置和耐磨衬套;

GB/T 28911-2012石油天然气钻井工程术语

本标准规定了石油天然气钻井工程专用的术语。本标准适用于石油天然气钻井工程领域，也适用于石油天然气工业的其他领域。

GA 1006-2012警用巡逻车

本标准规定了警用巡逻车的术语和定义、分类和代号、技术要求、试验方法、检验规则及标志、运输和贮存。本标准适用于以内燃机为动力、座位数不超过九座的乘用车改进的警用巡逻车。以新能源汽车改进的警用巡逻车可参照使用。

JT/T 795-2011事故汽车修复技术规范

本标准规定了事故汽车修复的作业流程、工艺要求、配件修换原则及质量保证。本标准适用于汽车事故损伤的修复。

SY/T 0439-2012石油天然气工程建设基本术语

本标准适用于油田、气田、输油管道、输气管道、油库、储气库、液化天然气等工程设计。

TB 10014-2012铁路工程地质钻探规程

本规程适用于铁路工程地质、水文地质钻探及物探测井、孔内测试钻孔的钻探工作。

DB11/T 137-2008汽车小修竣工出厂技术条件

本标准规定了汽车小修竣工出厂的技术要求和质量保证。本标准适用于小修竣工出厂的在用汽车。三轮汽车、专用作业车、气体燃料汽车、两用燃料汽车、双燃料汽车和电动汽车可参照执行。

EN 81-31-2010电梯制造与安装安全规范.仅货运电梯.第31部分:仅运送货物的电梯

This European Standard applies to new electric accessible goods only lifts with traction or positive drive and new hydraulic accessible goods only lifts; permanently installed in restricted areas and/or only used by authorised and instructed persons (users); serving fixed and permanent landing levels; having a load carrying unit made of a single load carrying area; designed for the transportation of goods only; moving along a fixed path (e. g. scissor lifts; lifts with guide rails) and inclined not more than 15° to the vertical; with rated speed not exceeding 1 m/s.This European Standard covers accessible goods only lifts with rated load exceeding 300 kg and not intended to move persons.This standard deals with all significant hazards; hazardous situations and events with the exception of those listed in below; relevant to accessible goods only lifts; when they are used as intended and under the conditions foreseen by the manufacturer.

EN ISO 13628-1-2005石油和天然气工业.水下采油系统的设计和操作.第1部分:一般要求和建议 ISO 13628-1-2005

This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment.This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbons from one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floating or subsea) or onshore, or to inject water/gas through subsea wells.This part of ISO 13628 and its related subsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are not specifically discussed because of their limited use. However, the information presented is applicable to those types of equipment.If requirements as stated inThis part of ISO 13628 are in conflict with, or are inconsistent with, requirements as stated in the relevant complementary parts of ISO 13628, then the specific requirements in the complementary parts take precedence.

DIN EN ISO 13628-4-2011石油和天然气工业.海底开采系统的设计和操作.第4部分:海底井口装置和采油树设备(ISO 13628-4-2010);英文版本EN ISO 13628-4-2010,仅在CD-ROM上

This part of ISO 13628 provides specifications for subsea wellheads, mudline wellheads, drill-through mudline wellheads and both vertical and horizontal subsea trees. It specifies the associated tooling necessary to handle, test and install the equipment. It also specifies the areas of design, material, welding, quality control (including factory acceptance testing), marking, storing and shipping for both individual sub-assemblies (used to build complete subsea tree assemblies) and complete subsea tree assemblies.The user is responsible for ensuring subsea equipment meets any additional requirements of governmental regulations for the country in which it is installed. This is outside the scope of this part of ISO 13628.Where applicable, this part of ISO 13628 can also be used for equipment on satellite, cluster arrangements and multiple well template applications.

DIN EN ISO 13628-7-2007石油和天然气工业.水下采油系统的设计和操作.第7部分:完井/修井提升管系统

This standard gives requirements and recommendations for the design, analysis, materials, fabrication testing and operation of subsea completion/workover (C/WO) riser systems run from a floating vessel.#,,#

DIN EN ISO 14224-2017石油、石化产品和天然气工业.设备可靠性和维修数据的采集与交换(ISO 14224-2016,修正版2016-10-01);英文版本EN ISO 14224-2016,只在CD-ROM

This International Standard provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. It describes data-collection principles and associated terms and definitions that constitute a \"reliability language\" that can be useful for communicating operational experience. The failure modes defined in the normative part of this International Standard can be used as a \"reliability thesaurus\" for various quantitative as well as qualitative applications. This International Standard also describes data quality control and assurance practices to provide guidance for the user. Standardization of data-collection practices facilitates the exchange of information between parties, e. g. plants, owners, manufacturers and contractors. This International Standard establishes requirements that any in-house or commercially available RM data system is required to meet when designed for RM data exchange. Examples, guidelines and principles for the exchange and merging of such RM data are addressed. This standard also provides framework and guideline for establishing performance objectives and requirements for equipment reliability and availability performance. Annex A contains a summary of equipment that is covered by this International Standard. - This International Standard recommends a minimum amount of data that is required to be collected and it focuses on two main issues: - data requirements for the categories of data to be collected for use in various analysis methodologies; - standardized data format to facilitate the exchange of reliability and maintenance data between plants, owners, manufacturers and contractors. The following main categories of data are to be collected: - equipment data, e. g. equipment taxonomy, equipment attributes; - failure data, e. g. failure cause,

DIN EN ISO 15136-1-2010石油和天然气工业用下降孔设备.人工升降机用推进腔体泵系统. 第1部分:泵(ISO 15136-1-2009).英文版本EN ISO 15136-1-2009

This document provides requirements for the design, design verification and validation, manufacturing and data control, performance ratings, functional evaluation, repair, handling and storage of progressing cavity pumps for use in the petroleum and natural gas industry. This part of ISO 15136 is applicable to those products meeting the definition of progressing cavity pumps (PCP) included herein. Connections to the drive string and tubulars are not covered. This International Standard includes normative annexes that establish requirements for: characterization and testing of stator elastomer material, design validation and functional evaluation. Additionally, informative annexes provide information for PCP elastomer selection and testing, installation, startup and operation guidelines, equipment selection and application guidelines, functional specification form, used pump evaluation, drive string selection and use, repair and reconditioning procedures and auxiliary equipment. Equipment not covered by the requirements of this part of ISO 15136 includes: bottom drive systems except for the PCP components, drive string components and auxiliary equipment such as tag bars, gas separators and torque anchors.

BS EN 81-31-2010电梯的建造和安装用安全性规程.仅供货物运输的电梯.仅用于货物进入的电梯

This European Standard applies to new electric accessible goods only lifts with traction or positivedrive and new hydraulic accessible goods only lifts, permanently installed in restricted areas and/or onlyused by authorised and instructed persons (users), serving fixed and permanent landing levels, having aload carrying unit made of a single load carrying area, designed for the transportation of goods only, movingalong a fixed path (e.g. scissor lifts, lifts with guide rails) and inclined not more than 15° to the vertical, withrated speed not exceeding 1 m/s.This European Standard covers accessible goods only lifts with rated load exceeding 300 kg and notintended to move persons.This standard deals with all significant hazards, hazardous situations and events with the exception of thoselisted in 1.3 below, relevant to accessible goods only lifts, when they are used as intended and under theconditions foreseen by the manufacturer (see Clause 4).

BS EN ISO 13628-1-2005+A1-2010石油和天然气工业.水下采油系统的设计和操作.第1部分:一般要求和推荐规范

This part of ISO 13628 provides general requirements and overall recommendations for development ofcomplete subsea production systems, from the design phase to decommissioning and abandonment. Thispart of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with moredetailed requirements for the subsystems which typically form part of a subsea production system. However,in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) moredetailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbonsfrom one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floatingor subsea) or onshore, or to inject water/gas through subsea wells. This part of ISO 13628 and its relatedsubsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are notspecifically discussed because of their limited use. However, the information presented is applicable to thosetypes of equipment.If requirements as stated in this part of ISO 13628 are in conflict with, or are inconsistent with, requirementsas stated in the relevant complementary parts of ISO 13628, then the specific requirements in thecomplementary parts take precedence.