金属产品及覆盖层检测

金属产品及覆盖层检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 12608-2003热喷涂 火焰和电弧喷涂用线材、棒材和芯材 分类和供货技术条件

本标准规定了用于热喷涂，特别是用于电弧和火焰喷涂的金属和非金属线材(实心和有芯)、棒材、芯材的分类要求。

GB/T 16938-2008紧固件.螺栓、螺钉、螺柱和螺母.通用技术条件

本标准规定了通用技术条件适用于已标准化的螺栓、螺钉和螺母，也推荐非标准的紧固件使用。它指定了在公差、机械和功能特性、几何特性、表面缺陷和质量状况等技术要求可引用的标准。

GB/T 24517-2009金属和合金的腐蚀.户外周期喷淋暴露试验方法

本标准规定了产品和材料开展户外周期喷淋暴露试验的试验原理、试验装置、试验条件、试验程序、试验记录、数据处理及结果表述和试验报告等。本标准适用于金属及其合金材料、金属覆盖层、阳极氧化膜和转化膜的自然环境周期喷淋腐蚀试验，对可能遇到淋雨环境的产品和材料亦可参照执行。

GB/T 28748-2012珠宝玉石饰品产品元数据

本标准规定了珠宝玉石饰品产品（以下简称“产品”）的信息模型，以及构成该模型的元数据实体和元数据元素。本标准适用于电子商务活动中对珠宝玉石饰品产品信息的分类、编目、发布和查询。

SY/T 6986.1-2014液化天然气设备与安装船用输送系统的设计与测试 第1部分:输送臂的设计与测试

SY/T 6986的本部分规定了液化天然气终端所使用船用输送臂的设计要求、低安全要求、远程控制系统要求以及检查和测试程序，还规定了船岸间安全输送LNG的低要求。本部分适用于新建液化天然气终端输送臂的设计与测试，扩建、改建液化天然气终端可参照执行。本部分不适用于与输送臂相关的零部件和附属件的设计和制造。

WJ 2607-2003兵器产品表面化学处理与电化学氧化处理膜层通用规范

本规范规定了兵器产品表面化学处理与电化学氧化处理膜层的要求、质量保证规定等内容。本规范适用于兵器行业车辆、火炮、枪械、光电仪器、弹箭、引信、火工品等金属产品零、部(组)件表面化学处理与电化学氧化处理膜层的制造与验收。

YS/T 949-2014废旧有色金属术语定义

本标准规定了废旧有色金属的术语和定义。本标准适用于废旧有色金属废件、废料的回收、加工和贸易等过程。

DIN 30692-2-2012煤气分配和安装装置用隔膜. 第2部分:增强弹性隔膜材料的要求和检验

This document contains requirements and test methods for fabric reinforced material for diaphragms used in gas distribution plants and appliances operated by pressures up to 45 bar and in temperatur range of -10 to +60 °C.

DIN CEN/TR 16098-2012建筑产品:危险物质的释放评估. 在满足CPD要求的条件下水平试验程序的概念; 英文版本CEN/TR 16098-2010

This Technical Report (TR), taking into account the state of the art in the Member States, identifies the role of testing in the assessment of construction products in view of possible emissions and makes recommendations on the testing procedures. The TR reviews in accordance with the experience already gained, the basis for deciding whether or not the use of horizontal test method standards for construction products is practicable and/or necessary in the sense of article 7.2 of the Construction Products Directive, and the Guidance Papers, in particular Guidance Papers H and M. The Technical Report also recommends how harmonized technical specifications (e. g. harmonized product standards) should address the subject of regulated dangerous substances. The TR also recommends how the expertise of product Technical Committees and EOTA Working Groups can be used when drafting the horizontal test method standards. The TR provides recommendations for complete testing procedures in the overall framework according to the methods for the Attestation of Conformity.

DIN CEN/TR 16496-2013建筑产品. 危险物质释放评估. 统一水平评估方法的使用; 德文版本CEN/TR 16496-2013

This Technical Report (TR) provides step-by-step guidance for product Technical Committees (TCs) and EOTA Working Groups (WGs), on how the harmonized measurement/test methods can be integrated into technical specifications.

DIN EN ISO 13628-7-2007石油和天然气工业.水下采油系统的设计和操作.第7部分:完井/修井提升管系统

This standard gives requirements and recommendations for the design, analysis, materials, fabrication testing and operation of subsea completion/workover (C/WO) riser systems run from a floating vessel.#,,#

DIN EN ISO 17668-2016铁制品上的锌扩散镀层.镀锌粉.规范(ISO 17668-2016).德文版本EN ISO 17668-2016

This ISO standard specifies minimum thickness requirements for six classes of zinc coating applied to ferrous products by the sherardizing process for the purpose of protection against corrosion and wear. It also specifies the minimum requirements of the zinc dust to be used in the sherardizing process. This standard does not specifiy any requirements for the surface condition (finish or roughness) of the basis material before sherardizing.After-treatments or organic over-coatings of sherardized articles are not in the scope of this standard. This standard does not apply to sherardized products (e. g. fasteners, tubes) for which specific standards exist and which may include additional requirements or requirements which are different from those of this standard.NOTE Individual product standards can incorporate this standard for the coating by quoting its number, or may incorporate it with modification specific to the product.

BS EN 858-1-2002轻液体(例如:油和石油)分离器系统.产品设计、性能和测试、标记和质量控制的原则

This standard specifies definitions, nominal sizes, principles of design, performance requirements, marking, testing and quality control for separator systems for light liquids.\nThis standard applies to separator systems for light liquids, where light liquids are separated from waste water by means of gravity and/or coalescence.\nThis standard does not apply to the treatment of stable emulsions, solutions of light liquids and water, grease and oils of vegetable and animal origin.