铝搪瓷检测

铝搪瓷检测项目报价？  解决方案？  检测周期？  样品要求？

点 击 解 答

GB/T 9989.1-2015搪瓷耐化学侵蚀的测定 第1部分:室温下耐酸侵蚀的测定

GB/T 9989的本部分规定了测定室温下搪瓷瓷釉和搪瓷制品耐酸化学侵蚀的试验方法，并规定了测定结果分级的方法。

GB/T 9989.2-2015搪瓷耐化学侵蚀的测定 第2部分:耐沸腾酸、沸腾中性液体及其蒸气化学侵蚀的测定

GB/T 9989的本部分规定了测试搪瓷耐沸腾酸、沸腾中性液体及其蒸气化学侵蚀的试验方法。本方法允许同时测定搪瓷材料耐液相和气相介质侵蚀的化学稳定性能。

GB/T 9989.3-2015搪瓷耐化学侵蚀的测定 第3部分:用六角形容器进行耐碱溶液侵蚀的测定

GB/T 9989的本部分规定了在25 ℃～95 ℃试验温度下，使用六角形容器，测定搪瓷制品耐碱溶液侵蚀的试验方法，该试验装置可以同时对6块搪瓷样品进行测试。

GB/T 9989.4-2015搪瓷耐化学侵蚀的测定 第4部分:用圆柱形容器进行耐碱溶液侵蚀的测定

GB/T 9989的本部分规定了在25℃～95℃试验温度下，使用圆柱形容器测定搪瓷制品耐碱溶液侵蚀的试验方法，该试验装置只能对一块搪瓷样品进行测试。

GB/T 9989.5-2015搪瓷耐化学侵蚀的测定 第5部分:在封闭系统中耐化学侵蚀的测定

本部分规定了在封闭系统中测定搪瓷制品耐酸性、中性和碱性溶液，以及实际过程中约定的混合液体侵蚀的试验方法。本方法主要用于在化学处理（加工）中使用的搪瓷性能的测试。

GB/T 19354-2003铝搪瓷 在电解液作用下 铝上瓷层密着性的测定(剥落试验)

本标准规定了一种以加速试验测试铝和铝合金上的搪瓷层在湿气暴露或气候老化暴露中的耐剥落性能的方法。因为剥落是由于搪瓷层与基体金属之间密着不佳而引起的，因此剥落试验也是一种密着性试验。在该试验中剥落的程度越严重，则制件在使用中剥落的可能性越大。

GB/T 32388-2015铝及铝合金不粘锅

本标准规定了铝及铝合金不粘锅(以下简称不粘锅)的术语和定义、产品分类、要求、试验方法、检验规则、标志、标签、使用说明书及包装、运输、贮存。本标准适用于以铝及铝合金为基材(包括内表面为铝或铝合金的复合材料)，与食品接触表面采用不粘涂层处理的家用食品烹饪器具。包括煎炒类、蒸煮类、饭煲类等。本标准不适用于烘烤器具。

GB/T 38166-2019钢板搪瓷、铝搪瓷和铸铁搪瓷的样板制备

本标准规定了用于试验的搪瓷样板的制备方法。本标准适用于两种不同的样板，包括：——产品样板；——特制样板。本标准适用于钢板搪瓷、铝搪瓷和铸铁搪瓷的样板制备。

NF A92-131-2009铝用釉瓷和搪瓷.在电解液作用下测定铝上瓷层附着力(剥落试验)

La présente Norme internationale spécifie une méthode d'essai pour la détermination accélérée de la résistance des revêtements émaillés déposés sur l'aluminium et les alliages d'aluminium à l'écaillage dû à l'humidité ou aux intempéries. L'écaillage résultant du manque d'adhérence entre le revêtement et le métal de base, l'essai d'écaillage est un essai d'adhésion. Plus le phénomène d'écaillage constaté au cours de l'essai effectué est important, plus le risque qu'il se reproduise en conditions réelles est grand.

DIN EN ISO 13805-2009铝用釉瓷和搪瓷 在电解液作用下测定铝上瓷层附着力(剥落试验)

This International Standard specifies a test method for the accelerated determination of the resistance of porcelainenamel coatings on aluminium and aluminium alloys to spalling as a result of exposure to moisture or weathering.Because spalling is caused by the lack of adhesion between the coating and the base metal, the spall test is a testof adhesion. The greater the extent of spalling in this test, the greater the likelihood that the article will spall inservice.

DIN EN ISO 28706-1-2011釉瓷和搪瓷.耐化学腐蚀性的测定.第1部分:室温下耐酸化学腐蚀性的测定(ISO 28706-1-2008).德文版本EN ISO 28706-1-2011

This part of ISO 28706 descirbes a test method for the determination of the resistance of vitreous and porcelain enamelled articles to attack by an acid at room temperature, and also specifies a method of classifying the results.

DIN EN ISO 28706-4-2016釉瓷和搪瓷.耐化学腐蚀性的测定.第4部分:通过使用圆柱形容器的碱性液体测定耐化学腐蚀性(ISO 28706-4-2016).德文版本EN ISO 28706-4-2016

This document specifies a test method for the determination of the resistance of vitreous and porcelain enamelled articles to attack by alkaline liquids at temperatures between 25 °C and 95 °C. The apparatus used is a cylindrical vessel in which only one enamelled specimen is tested.

DIN EN ISO 28706-5-2011釉层和搪瓷.耐化学腐蚀性的测定.第5部分:在封闭系统中测定耐化学腐蚀性(ISO 28706-5-2010);德文版本EN ISO 28706-5-2011

This document specifies a test method for the determination of the resistance of vitreous- and porcelain-enamelled articles to attack in closed systems by acid, neutral and alkaline liquids, as well as by actual process mixes. It applies primarily to the testing of enamels designed for use in chemical processes.

DIN EN ISO 28764-2016搪玻璃釉.薄钢板,薄铝板和铸铁上搪瓷试样的制备(ISO 28764-2015);德文版本EN ISO 28764:2015

This document specifies a method for the production of specimens suitable for testing vitreous and porcelain enamel coatings. It specifies two different kind of specimens, specimens taken from production article and those specially produced.

BS EN ISO 13805-2009铝用上釉和瓷釉.在电解液作用下铝上釉质粘合测定(剥落试验)

This International Standard specifies a test method for the accelerated determination of the resistance of porcelainenamel coatings on aluminium and aluminium alloys to spalling as a result of exposure to moisture or weathering.Because spalling is caused by the lack of adhesion between the coating and the base metal, the spall test is a testof adhesion. The greater the extent of spalling in this test, the greater the likelihood that the article will spall inservice.

BS EN ISO 13807-2009釉瓷和搪瓷.化学工业中用釉质热冲击试验中龟裂形成温度的测定

This International Standard specifies a test method for the determination of the crack formation temperature of enamels for the chemical industry by subjecting enamelled steel specimens to thermal shock using cold water.The value of the crack formation temperature measured according to this test method is not valid for the finished component (see annex A). It is a parameter of vitreous and porcelain enamels for comparing the relative quality of different enamel formulations.

BS EN ISO 28706-1-2011釉瓷和搪瓷.耐化学腐蚀性的测定.室温下耐酸化学腐蚀性的测定

This part of ISO 28706 describes a test method for the determination of the resistance of vitreous andporcelain enamelled articles to attack by an acid at room temperature, and also specifies a method ofclassifying the results.

BS EN ISO 28706-5-2011釉瓷和搪瓷.耐化学腐蚀性的测定.封闭系统中耐化学腐蚀性的测定

This part of ISO 28706 specifies a test method for the determination of the resistance of vitreous- andporcelain-enamelled articles to attack in closed systems by acid, neutral and alkaline liquids, as well as byactual process mixes.It applies primarily to the testing of enamels designed for use in chemical processes.

UNI 11132-2004铝搪瓷.在冲击试验和电解液作用下铝上瓷层密着性的测定

La norma definisce un metodo dell'adesione dello smalto porcellanato su alluminio mediante prova di impatto e attacco chimico con la soluzione di tricloruro di antimonio.

UNI EN ISO 13805-2009铝搪瓷.在电解液作用下铝上瓷层密着性的测定

La presente norma è la versione ufficiale della norma europea EN ISO 13805 (edizione gennaio 2009). La norma specifica una metodica di prova per la determinazione accelerata della resistenza del rivestimento di smalto porcellanato su alluminio e sue leghe alla squamatura conseguente all'esposizione all'umidità e agli agenti atmosferici. Visto che la squamatura dipende dalla carenza di aderenza tra il rivestimento e il metallo di supporto, la prova di squamatura è una prova di aderenza. Maggiore è la squamatura ottenuta durante questa prova, maggiore è il rischio che l'articolo sia soggetto a questo problema durante l'utilizzo.