成分分析 · 材料检测 · 食品检测 · 环境检测

专业检测知识科普,帮您选对检测方案

咨询工程师

太阳镜及相关眼部佩戴产品检测

发布时间:2024-06-21 作者:中析研究所 浏览:

GB/T 12903-2008个体防护装备术语

本标准规定了个体防护装备术语及定义。本标准适用于有关标准制、修订、技术文件的编制,手册、教材、书刊等的编写和翻译。本标准不适用于医疗救护用个人防护装备。

GB/T 30042-2013个体防护装备 眼面部防护 名词术语

本标准定义及解释了个体眼面部防护的主要名词术语。本标准适用于太阳镜、职业眼面部防护、运动眼面部防护及个体眼面部防护的其他有关领域。

NF X90-008-3-2008处于非相干光学辐射中人员的测量和评定.第3部分:太阳释放的紫外线(UV)辐射

La présente Norme européenne spécifie des modes opératoires de mesurage ou d'estimation et d'évaluation des expositions individuelles aux rayonnements ultraviolets (UV) émis par le soleil.La présente Norme européenne s'applique à l'exposition aux UV solaires pendant les séjours en extérieur.La présente Norme européenne s'applique aux travailleurs et à la population en général.Elle ne s'applique pas à l'exposition aux UV émis par des sources artificielles, par exemple, les lampes UV, les arcs de soudage.La présente Norme européenne ne s'applique pas à l'exposition à des rayonnements atteignant la rétine.

DIN EN 1938-2010人员眼睛保护.摩托车和机动脚踏两用车驾驶员用防护镜

This European Standard specifies requirements and test methods for goggles for use by all motorcycle and moped drivers and passengers, intended for eye-protection during the use of motorcycle and moped, both on the road and for off-road sport or leisure use, subject to the following exclusion. The goggles for official races and competitions are not included within the scope of this standard.

DIN EN 16128-2016眼科光学.镜框和镜片部分释放的镍含量测试的参考方法;德文版本EN 16128-2015

This document specifies the reference method for the testing of spectacle frames, ready-to-wear spectacles, sunglasses and other items for eye and face protection for nickel release. The reference method supports the demonstration of conformity with the limit value for nickel release of 0,5 µg/cm2/week set forth by European Regulation. This document applies to those parts of metal spectacle frames and those metal parts of combination spectacle frames that are intended to come into direct and prolonged contact with the skin of the wearer. This document also applies to those relevant metal parts of ready-to-wear spectacles, sunglasses and other items for eye and face protection.

DIN EN ISO 12311-2015个人防护设备.太阳镜和相关护目镜的试验方法(ISO 12311-2013,修订版2014-08-15).德文版本EN ISO 12311-2013

This International Standard specifies reference test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear.

DIN EN ISO 12312-2-2015眼部和面部保护.太阳镜和相关护目镜.第2部分:直接观察太阳的滤光片(ISO 12312-2-2015);德文版本EN ISO 12312-2-2015

This part of ISO 12312 applies to all afocal (plano power) products intended for direct observation of the sun, such as solar eclipse viewing. This part of ISO 12312 does not apply to the following: - afocal (plano power) sunglasses and clip-ons for general use intended for protection against solar radiation; - eyewear for protection against radiation from artificial light sources, such as those used in solaria; - eye protectors specifically intended for sports (e. g. ski goggles or other types); - sunglasses that have been medically prescribed for attenuating solar radiation; - prescription sunglass lenses.

BS EN 1938-2010个人眼睛保护.摩托车和机动脚踏两用车护目镜

This European Standard specifies requirements and test methods for goggles for use by all motorcycle andmoped drivers and passengers, intended for eye-protection during the use of motorcycle and moped, both onthe road and for off-road sport or leisure use, subject to the following exclusion. The goggles for official racesand competitions are not included within the scope of this standard.

ANSI Z80.11-2012眼角膜再造的激光设备

This standard applies to any laser system whose primary intended use is to alter the shape of the cornea through the removal of corneal tissue, resulting in the improvement of visual performance. This standard addresses the vocabulary, performance requirements, labeling, and clinical investigations necessary for this type of device.

上一篇GS1复合条码检测 下一篇儿童定配眼镜检测

相关阅读

了解更多检测知识

建筑产品和建筑构件I-隔热性分级检测

建筑产品和建筑构件I-隔热性分级检测,以标准升温曲线模拟火灾热负荷,测量试件背火面平均温升与最高温升,据此判定隔热时间并划分隔热等级。检测涵盖墙体、楼板、门窗及封堵构件等产品,试件安装须与工程实际一致,试验依托耐火试验炉与热电偶测温系统完成,结果用于产品型式检验与工程验收。

2026-10-11 | [其他]

体育用品外部和内部接线检测

体育用品外部和内部接线检测针对电动跑步机、电控健身器械等带电运动器材,涵盖导线截面积核验、软线固定装置拉力与扭矩试验、内部布线检查、绝缘电阻及电气强度测试等模块,用于识别导线松脱、绝缘失效与接地中断隐患,服务产品定型验证与质量管控。

2026-10-11 | [其他]

电池充电器附录AA 儿童使用的电池充电器检测

儿童使用的电池充电器检测依据电池充电器安全标准附录AA执行,围绕防触电结构、表面温升、标记耐久性与非正常工作等维度考核产品在儿童使用场景下的安全性。本文介绍其检测原理、适用范围、样品制备、试验项目、判定指标与送检要点,供企业与送检人员参考。

2026-10-11 | [其他]

集装袋塑料编织袋密度检测

集装袋塑料编织袋密度检测以浸渍法与称重法为核心,基于阿基米德原理测定试样密度。文章按裁样规范、状态调节、测定操作、结果判定与标准适用场景逐步展开,说明密度数据如何用于材质鉴别、再生料掺混筛查及批次一致性评估,供质量管控与送检参考。

2026-10-11 | [其他]

水性聚氨酯合成革拉伸负荷和断裂伸长率检测

水性聚氨酯合成革拉伸负荷和断裂伸长率检测依据合成革类产品国家标准,采用哑铃形试样经状态调节后,在电子万能试验机上按规定的试验速度施加轴向拉伸至断裂。检测覆盖样品制备、设备参数设置、结果计算与重复性评价,经向与纬向结果分别与限值比较,据此判定产品力学性能是否合格。

2026-10-11 | [其他]

电气安装用阻燃PVC塑料平导管燃烧性能(烟密度试验方法)检测

电气安装用阻燃PVC塑料平导管燃烧性能烟密度试验依据光衰减原理,在密闭烟箱内以辐射与点火方式引燃试样,连续记录透光率变化并计算最大比光密度。本文系统介绍试验装置、样品制备与状态调节、测定要点、性能指标判定及送检要求,为导管质量验收与工程复验提供方法参考。

2026-10-11 | [其他]

我们的优势

选择中析研究所的八大理由

资质齐全

旗下实验室依法依规开展检测,报告科学公正,获监管与客户广泛认可。

设备先进

上千台精密仪器定期检定校准,量值溯源体系完善。

专家团队

多领域技术专家,十年以上经验,破解各类疑难检测。

标准覆盖广

覆盖GB、行标及ISO、ASTM等国际标准,可定制方案。

周期短

常规项目7-10个工作日出报告,流程标准高效。

加急服务

支持加急检测通道,助力客户快速完成质量把关。

一对一服务

工程师全程对接,需求沟通到报告解读全流程陪伴。

数据保密

严格保密制度,客户样品与检测数据安全无忧。

荣誉资质

旗下实验室权威认证 · 公信检测 · 点击查看原图

CMA检验检测机构资质认定证书

CMA检验检测机构资质认定证书

CNAS实验室认可证书

CNAS实验室认可证书

ISO管理体系认证证书

ISO管理体系认证证书

高新技术企业证书

高新技术企业证书

中国分析测试协会会员单位

中国分析测试协会会员单位

中国质量协会会员证书

中国质量协会会员证书

AAA级信用企业证书

AAA级信用企业

绿色低碳诚信示范创建企业证书

绿色低碳诚信示范创建企业

仪器设备

1000余台精密设备 · 点击查看原图

气相色谱-质谱联用仪

气相色谱-质谱联用仪 GC-MS

复杂有机组分的定性鉴定与未知物剖析利器。

高效液相色谱仪

高效液相色谱仪 HPLC

食品添加剂、药品成分等热敏物质的精准检测。

电感耦合等离子体发射光谱仪

电感耦合等离子体发射光谱仪 ICP-OES

一次进样同时读出数十种金属元素含量。

傅里叶变换红外光谱仪

傅里叶变换红外光谱仪 FTIR

通过特征吸收峰快速判断材料种类与分子结构。

X射线荧光光谱仪

X射线荧光光谱仪 XRF

几分钟完成元素快检,且不损伤样品。

扫描电子显微镜

扫描电子显微镜 SEM

放大数十万倍观察表面微观结构,锁定失效根源。

液相色谱-质谱联用仪

液相色谱-质谱联用仪 LC-MS

农兽药残留等痕量物质的高灵敏确证检测。

气相色谱仪

气相色谱仪 GC

溶剂残留、香气成分等挥发性物质的专业检测。

在线工程师 一对一服务

检测需求不知从何入手?立即联系在线工程师,一对一解答检测疑问,免费获取检测方案与报价。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通