成分分析 · 材料检测 · 食品检测 · 环境检测

专业检测知识科普,帮您选对检测方案

咨询工程师

针织游泳衣织物检测

发布时间:2024-06-21 作者:中析研究所 浏览:

GB/T 8628-2013纺织品 测定尺寸变化的试验中织物试样和服装的准备、标记及测量

本标准规定了测定因水洗、干洗、水浸渍或汽蒸等处理程序引起尺寸变化时的纺织织物、服装和织物组件试样的准备、标记和测量方法,处理程序按照GB/T 8629、GB/T 19981、GB/T 8631、ISO 15797、FZ/T 20021的规定。本标准适用于机织物、针织物及纺织制品,不适用于某些装饰覆盖物。

GB/T 15557-2008服装术语

本标准规定了服装及服饰工业常用的术语、定义或说明。本标准适用于服装和服饰设计、生产、技术、教学、贸易及其相关领域。

ASTM D3996-1995针织游泳衣织物的标准性能规范

1.1 This performance specification covers circular and warp knitted fabrics for use in knit swimwear, composed of any textile fiber or mixture of textile fibers.1.2 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.1.3 The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D3996-2002针织游泳衣织物的标准性能规范

1.1 This performance specification covers circular and warp knitted fabrics for use in knit swimwear, composed of any textile fiber or mixture of textile fibers.1.2 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.1.3 The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D3996-2013针织游泳衣织物的标准性能规格

5.1x00a0;Upon mutual agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. 5.2x00a0;It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller. 5.2.1x00a0;In such cases, any references to the specification shall specify that: x201c;This fabric meets ASTM Specification D3996 except for the following characteristic(s).x201d; 5.3x00a0;Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4x00a0;The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1x00a0;This performance specification covers circular and warp knitted fabrics for use in knit swimwear, composed of any textile fiber or mixture of textile fibers. 1.2x00a0;These requirements apply to both the length and width directions for those properties where fabric direction is pertinent. 1.3x00a0;The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D3996-2014针织游泳衣织物的标准性能规格

5.1x00a0;Upon mutual agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. 5.2x00a0;It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller. 5.2.1x00a0;In such cases, any references to the specification shall specify that: x201c;This fabric meets ASTM Specification D3996 except for the following characteristic(s).x201d; 5.3x00a0;Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4x00a0;The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods. 1.1x00a0;This performance specification covers circular and warp knitted fabrics for use in knit swimwear, composed of any textile fiber or mixture of textile fibers. 1.2x00a0;These requirements apply to both the length and width directions for those properties where fabric direction is pertinent. 1.3x00a0;The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

上一篇男人及男孩机织礼服套装织物及针织运动夹克、运动裤、家常裤及长裤织物检测 下一篇针织领带和围巾织物检测

相关阅读

了解更多检测知识

包装用聚乙烯吹塑薄膜每卷段数和每段长度检测

每卷段数与每段长度是评价包装用聚乙烯吹塑薄膜卷装质量的关键指标。检测以整卷薄膜为样品,采用目测计数法清点段界面并统计段数,采用解卷计米法逐段测量展开长度,依据产品标准或合同要求判定合格与否,适用于出厂检验、到货验收与质量复核等场景。

2026-08-27 | [其他]

食品/保健食品有助于维持血糖健康水平检验检测

有助于维持血糖健康水平检验检测面向片剂、胶囊、口服液等剂型的食品与保健食品,检测范围涵盖总皂苷、粗多糖、总黄酮等功效成分定量,血糖与胰岛素指标测定,以及动物试验和人体试食功能评价。方法体系整合HPLC、分光光度法、酶法与ELISA,检测结论用于产品注册论证与质量控制。

2026-08-27 | [其他]

聚酯/低密度聚乙烯药品包装用复合膜、袋PET层与LDPE层剥离强度检测

PET/LDPE复合膜、袋剥离强度采用T型剥离试验测定:试样宽度常规为15 mm,经23 ℃、50 %RH状态调节后,在电子万能试验机上以规定速度连续剥离,读取有效区段平均剥离力,以N/15 mm表示,并对照国家药包材标准判定层间黏合质量,服务于工艺控制与包材放行。

2026-08-27 | [其他]

额定电压450/750 V及以下橡皮绝缘软线和软电缆绝缘老化前机械性能检测

该检测针对额定电压450/750 V及以下橡皮绝缘软线和软电缆的绝缘层,制备哑铃或管状试件,经厚度测量与截面积计算后实施拉伸试验,测定老化前抗张强度与断裂伸长率,并对照产品标准规定最小值判定,适用于型式试验、监督抽查与进场验收。

2026-08-27 | [其他]

荧光灯用交流和/或直流电子控制装置绕组的耐热试验检测

荧光灯用交流和/或直流电子控制装置绕组耐热试验,以烘箱高温老化模拟绕组绝缘在全寿命周期内的热应力,老化后复测电气强度与绝缘电阻,判定绝缘体系是否出现击穿、闪络或阻值劣化,是电子镇流器类产品型式检验与热寿命评估的关键项目。

2026-08-27 | [其他]

金属家具覆面材料(纺织面料/皮革)耐湿摩擦检测

金属家具软包覆面的纺织面料与皮革须进行耐湿摩擦检测:试样经标准大气调湿后,以含水率受控的白色棉布在摩擦头上往复摩擦,干燥后对照沾色用灰色样卡评级,结果以级数表示并对照产品标准限值判定,用于来料验收与质量核查。

2026-08-27 | [其他]

我们的优势

选择中析研究所的八大理由

资质齐全

旗下实验室依法依规开展检测,报告科学公正,获监管与客户广泛认可。

设备先进

上千台精密仪器定期检定校准,量值溯源体系完善。

专家团队

多领域技术专家,十年以上经验,破解各类疑难检测。

标准覆盖广

覆盖GB、行标及ISO、ASTM等国际标准,可定制方案。

周期短

常规项目7-10个工作日出报告,流程标准高效。

加急服务

支持加急检测通道,助力客户快速完成质量把关。

一对一服务

工程师全程对接,需求沟通到报告解读全流程陪伴。

数据保密

严格保密制度,客户样品与检测数据安全无忧。

荣誉资质

旗下实验室权威认证 · 公信检测 · 点击查看原图

CMA检验检测机构资质认定证书

CMA检验检测机构资质认定证书

CNAS实验室认可证书

CNAS实验室认可证书

ISO管理体系认证证书

ISO管理体系认证证书

高新技术企业证书

高新技术企业证书

中国分析测试协会会员单位

中国分析测试协会会员单位

中国质量协会会员证书

中国质量协会会员证书

AAA级信用企业证书

AAA级信用企业

绿色低碳诚信示范创建企业证书

绿色低碳诚信示范创建企业

仪器设备

1000余台精密设备 · 点击查看原图

气相色谱-质谱联用仪

气相色谱-质谱联用仪 GC-MS

复杂有机组分的定性鉴定与未知物剖析利器。

高效液相色谱仪

高效液相色谱仪 HPLC

食品添加剂、药品成分等热敏物质的精准检测。

电感耦合等离子体发射光谱仪

电感耦合等离子体发射光谱仪 ICP-OES

一次进样同时读出数十种金属元素含量。

傅里叶变换红外光谱仪

傅里叶变换红外光谱仪 FTIR

通过特征吸收峰快速判断材料种类与分子结构。

X射线荧光光谱仪

X射线荧光光谱仪 XRF

几分钟完成元素快检,且不损伤样品。

扫描电子显微镜

扫描电子显微镜 SEM

放大数十万倍观察表面微观结构,锁定失效根源。

液相色谱-质谱联用仪

液相色谱-质谱联用仪 LC-MS

农兽药残留等痕量物质的高灵敏确证检测。

气相色谱仪

气相色谱仪 GC

溶剂残留、香气成分等挥发性物质的专业检测。

在线工程师 一对一服务

检测需求不知从何入手?立即联系在线工程师,一对一解答检测疑问,免费获取检测方案与报价。